1、BS EN 12004-2:2017Adhesives for ceramic tilesPart 2: Test methodsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 12004-2:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12004-2:2017. It supersedes BS EN 1308:2007, BS E
2、N 1323:2007, BS EN 1324:2007, BS EN 1346:2007, BS EN 1348:2007, BS EN 12003:2008 and BS EN 12002:2008 which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/539, Ceramic tiles and other rigid tiling.A list of organizations represented on this committee can
3、 be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 88363 7 ICS 83.180; 91.10
4、0.10; 91.100.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2017.Amendments/corrigenda issued since publicationDate Text affectedBS EN 12004-2:20
5、17EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12004-2 February 2017 ICS 83.180; 91.100.10; 91.100.30 Supersedes EN 12002:2008, EN 12003:2008, EN 1308:2007, EN 1323:2007, EN 1324:2007, EN 1346:2007, EN 1348:2007English Version Adhesives for ceramic tiles - Part 2: Test methods Colles carrela
6、ge - Partie 2 : Mthodes dessai Mrtel und Klebstoffe fr Fliesen und Platten - Teil 2: Prfverfahren This European Standard was approved by CEN on 15 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the
7、 status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Frenc
8、h, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,
9、Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
10、Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Member
11、s. Ref. No. EN 12004-2:2017 EBS EN 12004-2:2017EN 12004-2:2017 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 Sampling . 6 4 Test conditions . 6 5 Test materials . 6 5.1 General 6 5.2 Ceramic tiles 6 5.3 Test substrate . 6 5.3.1 Concrete slab 6 5.3.2 Other substrates
12、6 6 Mixing of the adhesive . 7 7 Test report . 7 8 Test methods 8 8.1 Determination of open time 8 8.1.1 Test materials . 8 8.1.2 Apparatus . 8 8.1.3 Procedure. 8 8.1.4 Evaluation and expression of results . 9 8.1.5 Test report . 9 8.2 Determination of slip . 9 8.2.1 Test materials . 9 8.2.2 Apparat
13、us . 9 8.2.3 Procedure 10 8.2.4 Test report 10 8.3 Determination of tensile adhesion strength for cementitious adhesives (C) 11 8.3.1 Test materials 11 8.3.2 Apparatus 11 8.3.3 Procedure 12 8.3.4 Evaluation and expression of results 13 8.3.5 Test report 14 8.4 Determination of shear adhesion strengt
14、h of dispersion adhesives (D) . 14 8.4.1 Test materials 14 8.4.2 Apparatus 14 8.4.3 Procedure 17 8.4.4 Evaluation and expression of results 19 8.4.5 Test report 19 8.5 Determination of shear adhesion strength of reaction resin adhesives (R) 19 8.5.1 Test materials 19 8.5.2 Apparatus 19 8.5.3 Procedu
15、re 20 8.5.4 Evaluation and expression of results 22 8.5.5 Test report 22 8.6 Determination of transverse deformation of cementitious adhesives (C) 22 8.6.1 Principle 22 8.6.2 Test materials 22 BS EN 12004-2:2017EN 12004-2:2017 (E) 3 8.6.3 Apparatus 23 8.6.4 Procedure 25 8.6.5 Test report 26 Annex A
16、(normative) Concrete slab for test . 27 A.1 General information 27 A.2 Test conditions 27 A.3 Apparatus 27 A.4 Concrete slab 27 A.4.1 Manufacture of the concrete slab 27 A.4.2 Conditioning of the concrete slab . 28 A.4.3 Water absorption at the surface 28 A.4.4 Tensile adhesion strength . 28 A.4.5 D
17、ata recorded 28 Annex B (normative) Failure patterns . 31 B.1 Adhesion failure (AF-S or AF-T) 31 B.2 Cohesive failure within the adhesive (CF-A) . 32 B.3 Cohesive failure in the substrate or in the tile (CF-S or CF-T) 33 Bibliography . 35 BS EN 12004-2:2017EN 12004-2:2017 (E) 4 European foreword Thi
18、s document (EN 12004-2:2017) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 201
19、7, and conflicting national standards shall be withdrawn at the latest by August 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document
20、supersedes EN 1308:2007, EN 1323:2007, EN 1324:2007, EN 1346:2007, EN 1348:2007, EN 12002:2008, EN 12003:2008. EN 12004, Adhesives for tiles, is composed with the following parts: Part 1: Requirements, evaluation of conformity, classification and designation; Part 2: Test methods. According to the C
21、EN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung
22、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12004-2:2017EN 12004-2:2017 (E) 5 1 Scope This European Standard specifies the methods for
23、determining characteristics for adhesives used in internal and external installation of ceramic tiles. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. The following test methods are described: determination of open
24、 time (8.1); determination of slip (8.2); determination of tensile adhesion strength for cementitious adhesives (8.3); determination of shear adhesion strength of dispersion adhesives (8.4); determination of shear adhesion strength of reaction resin adhesives (8.5); determination of transverse defor
25、mation of cementitious adhesives (8.6). NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones. WARNING This European Standard can involve hazardous materials and operations. Persons using this standar
26、d should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and
27、national regulatory conditions. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc
28、ed document (including any amendments) applies. EN 196-1:2016, Methods of testing cement Part 1: Determination of strength EN 459-2, Building lime - Part 2: Test methods EN 1067, Adhesives - Examination and preparation of samples for testing EN 12004-1, Adhesives for ceramic tiles - Part 1: Requirem
29、ents, assessment and verification of constancy of performance, classification and marking EN 14411, Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking EN ISO 15605, Adhesives - Sampling (ISO 15605) BS EN 12004-2:2017EN 120
30、04-2:2017 (E) 6 3 Sampling Take at least 2 kg sample of the adhesive in accordance with EN ISO 15605 and EN 1067. 4 Test conditions Standard conditions shall be (23 2) C and (50 5) % relative humidity and the speed of air in the testing area less than 0,2 m/s. The tolerance in the time of conditioni
31、ng for all test specimens shall be as shown in Table 1 below: Table 1 Allowed tolerance in testing time for all samples requiring conditioning Sample Conditioning Time Allowed tolerance for testing 6 h 15 min 7 d 3 h 14 d 6 h 21 d 9 h 28 d 12 h Testing shall be performed within the specified time wi
32、ndow. 5 Test materials 5.1 General Condition all test materials for at least 24 h under standard conditions. The adhesive to be tested shall be within its shelf life, where this is specified. 5.2 Ceramic tiles The tiles shall be checked prior to conditioning to ensure that they are unused, clean and
33、 dry. The type of tile shall be as specified under the specific test procedures found in Clause 8. 5.3 Test substrate 5.3.1 Concrete slab The concrete slab shall be at least 35 mm thick, have a moisture content of less than 3 % by mass (carbide method) and have a water absorption at the surface afte
34、r 4 h in the range of 0,5 cm3to 1,5 cm3. The tensile adhesion strength shall be at least 1,5 N/mm2. The test surface shall have a finish similar to that obtained by using a wooden float and be clean and dust-free at the time of the test. A method for manufacturing a suitable concrete test slab and t
35、he procedures for measuring the performances are given in Annex A. 5.3.2 Other substrates Other substrates may be used upon agreement if the substrate is recommended for ceramic tile application by the adhesive manufacturer. To demonstrate compatibility with other optional substrates, the adhesive s
36、hall be applied to the selected substrate in accordance with the open time test method (8.1). When the result of 0,5 N/mm2is achieved or cohesive failure occurs in the substrate, the requirement is considered satisfied. BS EN 12004-2:2017EN 12004-2:2017 (E) 7 6 Mixing of the adhesive The amount of w
37、ater and/or liquid admix required for preparing the cementitious adhesive shall be as stated by the manufacturer in parts by mass, i.e. liquid to dry powder (in the case where a range of values is given, the average shall be used). Prepare a minimum quantity of 2 kg of the adhesive in a mixer of the
38、 type described in EN 196-1:2016, 4.4, using the slow speed settings (140 5) rotations per min and (62 5) revolution planetary movement. Carry out the following procedure: pour the liquid into the pan; scatter the dry powder over the liquid; mix for 30 s; take out the mixing paddle; scrape down the
39、paddle and pan within 1 min; replace the paddle and mix for 1 min. Let the adhesive mature as specified in the manufacturers instructions, and then mix for a further 15 s. Where ready-to-use dispersion adhesives or reaction resin adhesives are to be used, the manufacturers instructions shall be foll
40、owed. 7 Test report The test report shall provide the following information: a) the number and year of issue of this European Standard, i.e. EN 12004-2, and date of issue; b) the place, date and time of sampling; c) type of adhesive, commercial designation and manufacturer; d) identification of test
41、 sample; e) handling and storage of samples before testing; f) test conditions; g) date of test; h) amount of water or liquid used for preparing the adhesive (for cementitious adhesives); i) any other factor that could have influenced the result; j) test results (individual and mean values and mode
42、of failure where required): 1) open time; 2) slip; BS EN 12004-2:2017EN 12004-2:2017 (E) 8 3) tensile adhesion strength; 4) shear adhesion strength; 5) transverse deformation. 8 Test methods 8.1 Determination of open time 8.1.1 Test materials 8.1.1.1 Ceramic tiles The tiles used for this method shal
43、l be glazed porous body tile complying with EN 14411, group BIII, of water absorption (15 3) % by mass, with a thickness in the range 7 mm to 10 mm and a profile back pattern less than 0,25 mm deep, cut to facial dimensions of (50 1) mm x (50 1) mm. 8.1.1.2 Test substrate The concrete slab shall com
44、ply with the requirements given in 5.3.1. 8.1.2 Apparatus 8.1.2.1 Notched trowel. A notched trowel having 6 mm x 6 mm notches at 12 mm centres. 8.1.2.2 Weight (Mass). A mass capable of exerting a force of (20 0,05) N, with a cross-sectional area of less than 50 mm x 50 mm. 8.1.2.3 Pull-head plates.
45、Square metallic plates, with dimensions of (50 1) mm x (50 1) mm and a minimum thickness of 10 mm with a suitable fitting for connection to the test machine. 8.1.2.4 Test machine. A test machine for direct pull tensile force test and with suitable capacity and sensitivity for the test. The machine s
46、hall be capable of applying the load to the pull-head plate at the rate of (250 50) N/s through a suitable fitting that does not exert any bending force. 8.1.3 Procedure Apply a thin layer of the adhesive, mixed in accordance with Clause 6, to the concrete slab with a straight edge trowel. Then appl
47、y a thicker layer and comb with the notched trowel (8.1.2.1). The trowel shall be held at an angle of approximately 60 to the substrate at a right angle to one edge of the slab and drawn across the slab parallel to that edge (in a straight line). After 5 min, 10 min, 20 min and 30 min place at least
48、 10 test tiles (8.1.1.1) 50 mm apart, on the adhesive within 30 s. The tiles are placed on no more than four ribs for all adhesives. Load each tile with (20 0,05) N for 30 s (8.1.2.2). After 27 d storage under standard conditions, bond the pull-head plates (8.1.2.3) to the tiles with a suitable high
49、 strength adhesive (e.g. epoxide adhesive). After a further 24 h storage under standard conditions determine the tensile adhesion strength of the adhesive by applying a force increasing at a constant rate of (250 50) N/s. BS EN 12004-2:2017EN 12004-2:2017 (E) 9 8.1.4 Evaluation and expression of results The individual tensile adhesion strengths are quoted to the nearest 0,1 N/mm2using the following formula: =sA LA (1) where As is the individual tensile adhesion strength in Newton per square millimetre; L is
