1、BSI Standards PublicationBS EN 12050-3:2015Wastewater lifting plants forbuildings and sitesPart 3: Lifting plants for limited applicationsBS EN 12050-3:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12050-3:2015. It supersedes BS EN 12050-3:2001 which is w
2、ithdrawn.The UK participation in its preparation was entrusted to Technical Committee B/505, Wastewater engineering.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contrac
3、t. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 79316 5 ICS 13.060.30; 91.140.80 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published und
4、er the authority of the Standards Policy and Strategy Committee on 31 March 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12050-3 March 2015 ICS 91.140.80 Supersedes EN 12050-3:2000English Version Wastewater liftin
5、g plants for buildings and sites - Part 3: Lifting plants for limited applications Stations de relevage deffluents pour les btiments et terrains - Partie 3 : Stations de relevage application limite pour effluents Abwasserhebeanlagen fr die Gebude- und Grundstcksentwsserung - Teil 3: Hebeanlagen zur
6、begrenzten Verwendung This European Standard was approved by CEN on 17 January 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a
7、nd bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the
8、 responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugosl
9、av Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN D
10、E NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12050-3:2015 EBS EN 12050-3:2015EN 12050-3:2015 (E) 2 Contents Pag
11、e Foreword 4 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviations .6 3.1 Terms and definitions .6 3.2 Symbols and abbreviations 6 3.2.1 Symbols 6 3.2.2 Abbreviations .7 4 Material and product characteristics .7 4.1 Materials .7 4.2 Mechanical resistance .7 4.3 Watertigh
12、tness .7 4.4 Odourtightness 7 4.5 Lifting effectiveness 7 4.5.1 General 7 4.5.2 Pipe connections .8 4.5.3 Ventilation .8 4.5.4 Minimum flow velocity 8 4.5.5 Minimum free ball passage of the plant 9 4.5.6 Minimum size of discharge pipework 9 4.6 Control equipment .9 4.7 Electrical equipment 9 4.8 Fix
13、ing devices . 10 4.9 Reaction to fire 10 4.9.1 General . 10 4.9.2 Plants classified as Class A1 without the need for testing 10 4.9.3 Plants classified according to test results . 10 4.10 Noise level . 11 4.11 Durability . 11 4.11.1 General . 11 4.11.2 Durability of watertightness and odourtightness
14、 11 4.11.3 Durability of lifting effectiveness 11 4.11.4 Durability of mechanical resistance . 12 4.12 Dangerous substances 12 5 Testing . 12 5.1 General . 12 5.2 Testing for hydraulic performance . 12 5.3 Tightness testing 12 5.3.1 Water pressure test 12 5.3.2 Odourtightness of faecal lifting plant
15、s . 12 5.3.3 Discharge pipe connection 13 5.4 Lifting effectiveness of lifting plants for limited applications for wastewater containing faecal matter 13 5.4.1 Pumping of solids . 13 5.4.2 Test procedure 14 5.4.3 Completion of test 14 5.4.4 Maximum inflow 14 BS EN 12050-3:2015EN 12050-3:2015 (E) 3 5
16、.4.5 Additional connections . 14 5.4.6 Device for preventing backflow (if fitted) 14 5.5 Lifting effectiveness of lifting plants for limited applications for faecal free wastewater . 15 6 Assessment and verification of constancy of performance - AVCP 15 6.1 General . 15 6.2 Type testing . 16 6.2.1 G
17、eneral . 16 6.2.2 Test samples, testing and compliance criteria 16 6.2.3 Test reports 17 6.2.4 Shared other party results 17 6.2.5 Cascading determination of the product type results . 18 6.3 Factory production control (FPC) 19 6.3.1 General . 19 6.3.2 Requirements . 19 6.3.3 Product specific requir
18、ements . 23 6.3.4 Initial inspection of factory and of FPC only for products covered by AVCP system 1 23 6.3.5 Continuous surveillance of FPC only for products covered by AVCP system 1 . 24 6.3.6 Procedure for modifications. 24 6.3.7 One-off products, pre-production products (e.g. prototypes) and pr
19、oducts produced in very low quantity . 24 7 Marking, labelling and packaging 25 7.1 Manufacturers declaration . 25 7.2 Marking . 25 8 Manufacturers instructions for installation, operation and maintenance 26 Annex A (informative) Recommended materials . 27 Annex ZA (informative) Clauses of this Euro
20、pean Standard addressing the provisions of the EU Construction Products Regulation 28 ZA.1 Scope and relevant characteristics . 28 ZA.2 Procedure for AVCP of Wastewater lifting plants for limited applications . 30 ZA.2.1 System(s) of AVCP 30 ZA.2.2 Declaration of performance (DoP) . 32 ZA.2.2.1 Gene
21、ral 32 ZA.2.2.2 Content 33 ZA.2.2.3 Example of DoP 33 ZA.3 CE marking and labelling 35 Bibliography 39 BS EN 12050-3:2015EN 12050-3:2015 (E) 4 Foreword This document (EN 12050-3:2015) has been prepared by Technical Committee CEN/TC 165 “Wastewater engineering”, the secretariat of which is held by DI
22、N. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2015 and conflicting national standards shall be withdrawn at the latest by December 2016. Attention is drawn to the possibility that s
23、ome of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12050-3:2000. This document has been prepared under a mandate given to CEN by the European Commission
24、and the European Free Trade Association, and supports essential requirements of the Regulation (EU) No. 305/2011. For relationship with EU Regulation, see informative Annex ZA, which is an integral part of this document. EN 12050 “Wastewater lifting plants for buildings and sites” consists of the fo
25、llowing parts: Part 1: Lifting plants for wastewater containing faecal matter Part 2: Lifting plants for faecal-free wastewater Part 3: Lifting plants for limited applications Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter The main changes with respect t
26、o the previous edition are listed below: a) Title was shortened and scope changed to apply for lifting plants for limited applications for domestic non-commercial wastewater containing or not containing faecal matter; b) reaction to fire added; c) paragraph title “Evaluation of conformity” changed t
27、o “Assessment and verification of constancy of performance AVCP” and updated in accordance with “Implementation of the Construction Products Regulation (CPR) in harmonized standards”; d) Annex ZA updated in accordance with “Implementation of the Construction Products Regulation (CPR) in harmonized s
28、tandards” (adoption of the Regulation EU No. 305/2011); e) editorially revised. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republi
29、c, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 1
30、2050-3:2015EN 12050-3:2015 (E) 5 1 Scope This European Standard applies to lifting plants for limited applications for domestic non-commercial wastewater containing or not containing faecal matter and located below flood level. NOTE Limited application means that the number of users is small and the
31、 plant is located in the same room as the sanitary appliance(s) served by it1)which are installed in accordance with EN 120561 and the layout and calculation are in accordance with EN 120564. This European Standard applies to lifting plants for limited applications designed for wastewater containing
32、 faecal matter, where there is another WC available above flood level, and the plants serve no more than a single WC to which it is directly connected (at a distance of max. 0,5 m) and one hand washbasin, one shower and one bidet provided no other sanitary appliance is directly or indirectly connect
33、ed. This European Standard also applies to lifting plants for limited applications designed for faecal free wastewater, where a maximum of one hand washbasin or kitchen sink plus one further appliance such as a bathtub or a washing machine or a shower or a dish washer or an urinal are connected. No
34、other sanitary appliance shall be directly or indirectly connected. This European Standard contains general requirements, basic construction and testing principles, together with information on materials. Construction and testing requirements for non-return valves used in wastewater lifting plants f
35、or limited applications are given in EN 12050-4. This European Standard does not apply for lifting plants for limited applications for wastewater containing faecal matter where WC flushing is carried out by pressure flush valve. 2 Normative references The following documents, in whole or in part, ar
36、e normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 33, WC pans and WC suites Connecting dimensions EN 9
37、97, WC pans and WC suites with integral trap EN 12056-1, Gravity drainage systems inside buildings Part 1: General and performance requirements EN 12056-4, Gravity drainage systems inside buildings Part 4: Wastewater lifting plants Layout and calculation EN 13501-1, Fire classification of constructi
38、on products and building elements Part 1: Classification using data from reaction to fire tests EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the thermal attack by a single burning item EN 60529, Degrees of protection provided by enclosures (
39、IP Code) (IEC 60529) 1)The installation of a faecal lifting plant for limited applications above flood level is normally not allowed but limited to exceptional cases described in EN 12056-1; lifting plants above flood level are not subject to this standard. BS EN 12050-3:2015EN 12050-3:2015 (E) 6 EN
40、 ISO 9906:2012, Rotodynamic pumps Hydraulic performance acceptance tests Grades 1, 2 and 3 (ISO 9906:2012) EN ISO 20361, Liquid pumps and pump units Noise test code Grades 2 and 3 of accuracy (ISO 20361) 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of th
41、is document, the following terms and definitions apply. 3.1.1 lifting plant for limited applications device for the automatic lifting of wastewater which may or may not contain faecal matter to a height above flood level from sanitary appliances connected to it and located in the same room Note 1 to
42、 entry A non-return valve according to EN 120504 is a component of the plant. 3.1.2 flood level maximum level to which waste water can rise within a drainage system SOURCE: EN 12056-1:2000, 3.1.7 3.1.3 tank of lifting plant for limited applications integral part of a lifting plant for limited applic
43、ations, containing the pump and its controls and the liquid volume required by the pump installation to fulfil its function Note 1 to entry The tank of a lifting plant for limited applications is not considered to be a collection tank according to EN 120501. 3.1.4 pumping device of lifting plant for
44、 limited applications component of a lifting plant for limited applications which pumps wastewater to a height above flood level 3.1.5 maximum pump operating pressure maximum hydrostatic pressure that the pumping device is capable to create 3.1.6 ball passage passage where a ball with a defined diam
45、eter can pass through without deformation 3.2 Symbols and abbreviations 3.2.1 Symbols dipipe internal diameter, in mm Q flow rate, in l/s H discharge head, in m v flow velocity, in m/s BS EN 12050-3:2015EN 12050-3:2015 (E) 7 3.2.2 Abbreviations AVCP assessment and verification of constancy of perfor
46、mance DN nominal diameter CWT classified without testing CWFT classified without further testing SBI single burn item DoP declaration of performance FPC factory production control 4 Material and product characteristics 4.1 Materials Materials used shall be adequate to meet the demands of installatio
47、n and operation. Materials shall comply with the requirements of this standard and shall not release dangerous substances (see 4.10). Examples of suitable materials for the construction of wastewater lifting plants are given in Annex A (informative). For tanks only corrosion resistant materials or m
48、aterials with a corrosion resistant protective coating shall be used. 4.2 Mechanical resistance The structural stability of tanks shall be shown to be adequate for the place of installation. When tested according to 5.3.1 the tank shall be tight and shall not show any deformation influencing subsequ
49、ent function of the lifting plant. 4.3 Watertightness Lifting plants for limited applications, except their inlet, outlet and vent openings, shall be closed and watertight when tested according to 5.3.1. 4.4 Odourtightness Lifting plants for limited applications for wastewater containing faecal matter shall be odourtight when tested according to 5.3.2. 4.5 Lifting effectiveness 4.5.1 General The lifting plant for limited applications shall be capable of pumping domestic wastewater including all the solid matter it usually contains,
