1、BRITISH STANDARD BS EN 12832:1999 Characterisation of sludges Utilisationand disposal of sludges Vocabulary The European Standard EN 12832:1999 has the status of a British Standard ICS 01.040.65; 13.030.20BSEN12832:1999 This British Standard, having been prepared under the directionof the Health and
2、 Environment Sector Committee, was published under the authorityof the Standards Committee and comes intoeffecton 15 October 1999 BSI 03-2000 ISBN 0 580 32604 7 National foreword This British Standard is the English language version of EN 12832:1999. The UK participation in its preparation was entru
3、sted to Technical Committee EH/5, Sludge characterization, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor rela
4、ted international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Further information The attention of readers is drawn to the UK statutory document “Code of practice for agricultural use of s
5、ewage sludge”1989, published by the DETR and revised in1996. With reference to definition4.14 pasteurized sludge, this UK Code gives conditions of70 C for30min or55 C for4hours. Cross-references The British Standards which implement international or European publications referred to in this document
6、 may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of Briti
7、sh Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 18 and a back cover. T
8、his standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN12832:1999 BSI 03-2000 i Contents Page National foreword Inside front co
9、ver Foreword 2 1 Scope 3 2 Normative reference 4 3 General terms and definitions 4 4 Wastewater sludge, sewage sludge 7 5 Waterworks sludge 10 6 Other sludges 11 Anhang A (informative) Trilingual alphabetical index 12 Bibliography 17ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12832
10、August 1999 ICS 01.040.13; 13.030.20 English version Characterisation of sludges Utilisation and disposal of sludges Vocabulary Caractrisation des boues Valorisation et limination des boues Vocabulaire Charakterisierung von Schlmmen Schlammverwertung und -entsorgung Wrterbuch This European Standard
11、was approved by CEN on 26 March 1999. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such n
12、ational standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and
13、 notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerla
14、nd and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.
15、No. EN 12832:1999 EEN 12832:1999 2 BSI 03-2000EN 12832:1999 BSI 03-2000 3EN 12832:1999 4 BSI 03-2000EN 12832:1999 BSI 03-2000 5EN 12832:1999 6 BSI 03-2000EN 12832:1999 BSI 03-2000 7EN 12832:1999 8 BSI 03-2000EN 12832:1999 BSI 03-2000 9EN 12832:1999 10 BSI 03-2000EN 12832:1999 BSI 03-2000 11EN12832:1
16、999 12 BSI 03-2000EN12832:1999 BSI 03-2000 13EN12832:1999 14 BSI 03-2000EN12832:1999 BSI 03-2000 15EN12832:1999 16 BSI 03-2000EN 12832:1999 BSI 03-2000 17EN 12832:1999 18 BSI 03-2000blankBS EN 12832:1999 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent n
17、ational body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess t
18、he latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of w
19、hich can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards
20、 publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards B
21、SI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centr
22、e. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright
23、 Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in an
24、y form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
