1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13141-7:2010Ventilation for buildings Performance testing ofcomponents/products forresidential ventilationPart 7: Performance testing of a mechanicalsupply and exhaust vent
2、ilation units(including heat recovery) for mechanicalventilation systems intended for singlefamily dwellingLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 08:19, Uncontrolled Copy, (c) BSIBS EN 13141-7:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementa
3、tion of EN 13141-7:2010.It supersedes BS EN 13141-7:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee RHE/2, Ventilation for buildings, heating and hot waterservices.A list of organizations represented on this committee can beobtained on request to i
4、ts secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 63430 7ICS 91.140.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was
5、published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 08:19, Uncontrolled Copy, (c) BSIBS EN 13141-7:2010EUROPEAN STANDARD NORME EUROPENNE
6、EUROPISCHE NORM EN 13141-7 November 2010 ICS 91.140.30 Supersedes EN 13141-7:2004English Version Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recov
7、ery) for mechanical ventilation systems intended for single family dwellings Ventilation des btiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 7: Essais de performance des centrales double flux (y compris la rcupration de chaleur) pour les systmes de
8、 ventilation mcaniques prvus pour des logements individuels Lftung von Gebuden - Leistungsprfungen von Bauteilen/Produkten fr die Lftung von Wohnungen - Teil 7: Leistungsprfung von mechanischen Zuluft- und Ablufteinheiten (einschlielich Wrmerckgewinnung) fr mechanische Lftungsanlagen in Wohneinheite
9、n (Wohnung oder Einfamilienhaus) This European Standard was approved by CEN on 25 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to
10、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde
11、r the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany,
12、 Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Man
13、agement Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13141-7:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 08:19, Uncontrolled Copy, (c) BSIBS EN 13141-7:
14、2010EN 13141-7:2010 (E) 2 Contents page Foreword 3Introduction . 51 Scope 52 Normative references 63 Terms, definitions and classification 63.1 Terms and definitions . 73.2 Categories of heat exchangers 84 Symbols and abbreviations 95 Requirements . 96 Test methods 106.1 General 106.2 Performance te
15、sting of aerodynamic characteristics 116.2.1 Leakages . 116.2.2 Air flow/pressure curve . 136.2.3 Filter bypass . 146.3 Performance testing of thermal characteristics . 146.3.1 General 146.3.2 Temperature and humidity ratios . 156.3.3 Heat pump performance . 186.3.4 Combined heat pump and air-to-air
16、 heat exchanger performance 186.4 Performance testing of acoustic characteristics . 196.4.1 Noise radiated through the casing of the unit 196.4.2 Sound power level in duct connections of the unit . 206.5 Electric power input. 227 Test results . 237.1 Test report 237.2 Product specifications 237.3 Le
17、akages . 237.4 Air flow/pressure curve . 247.5 Heat pump exhaust air/outdoor air performances . 247.6 Temperature ratios 247.7 Acoustic characteristics . 257.8 Electric power input. 25Annex A (informative) Example of some possible arrangements of heat recovery heat exchanger and/or heat pumps for ca
18、tegory I . 26Annex B (normative) Pressure leakage test method . 28B.1 External leakage. 28B.2 Internal leakage test 28Annex C (normative) Tracer gas test method 30C.1 General method for rating purposes . 30C.2 Augmented method for measuring instantaneous recirculation of ducted units under different
19、 operating conditions (optional) . 31C.3 Testing orders for tracer gas tests 32Bibliography 36Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 08:19, Uncontrolled Copy, (c) BSIBS EN 13141-7:2010EN 13141-7:2010 (E) 3 Foreword This document (EN 13141-7:2010) has been prepared by Techn
20、ical Committee CEN/TC 156 “Ventilation for buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and conflicting national standards shall b
21、e withdrawn at the latest by May 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13141-7:2004. Compa
22、red to the 2004 version, changes have been made to the following (sub)clauses, tables and annexes: modification of the test temperatures to be similar to those of heat pump; possibility of measuring supply and exhaust ventilation and heat pump; suppression of reference to EN 308 for heat exchangers
23、particular test conditions, this standard define its own conditions; introduction of tracer gas method for leakages; dependence of leakages under/over pressure configurations on fan position in airflow; obligation of reporting the two temperature ratios (on exhaust and supply air); possibility of do
24、ing an optional test by measuring on the outdoor side of the building while the measure is made on the inside side of the building in the mandatory test (exhaust and supply air flow rate); possibility of giving humidity ratios, like for PAC, this allowed to test enthalpy heat exchangers; review of v
25、alue for balanced mass flows at 3 %, over 3% declaration of unbalanced unit and report of the disbalance value; setting of the declared maximum air volume flow at 50 Pa by default in lack of other declaration; addition of the declared minimum air volume flow at Ptud/2 and minimum setting; creation o
26、f a reference point at Ptud/2 and 70 % of declared maximum air volume flow; correction of the temperature ratios considering flow rate ratios. This standard is a part of a series of standards on residential ventilation. It has a parallel standard referring to the performance characteristics of the c
27、omponents/products for residential ventilation. The position of this standard in the field of standards for the mechanical building services is shown in Figure 1. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
28、 this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer
29、land and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 08:19, Uncontrolled Copy, (c) BSIBS EN 13141-7:2010EN 13141-7:2010 (E) 4 Mechanical Building Services Control systems Ventilation and air conditioning systems Heating systems Ductwork Air terminal devices
30、Air handling units Mechanical and natural residential ventilation Design criteria for the indoor environment System performance Installation Components/products for residential ventilation Required and optional performance characteristics Performance testing of components/products for residential ve
31、ntilation Simplified calculation methods for residential ventilation systems Design and dimensioning for residential ventilation systems Performance testing and installation checks for residential ventilation systems Part 1: Externally and internally mounted air transfer devices Part 2: Exhaust and
32、supply air terminal devices Part 3: Range hoods for residential use Part 4: Fans used in residential ventilation systems Part 5: Cowls and roof outlet terminal devices Part 6: Exhaust ventilation system packages used in a single dwelling Part 7: Mechanical supply and exhaust ventilation units (inclu
33、ding heat recovery) for mechanical ventilation systems intended for single family dwellings Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room Part 9: Externally mounted humi
34、dity controlled air transfer device Part 10: Humidity controlled extract air terminal device Figure 1 Position of EN 13141-7 in the field of the mechanical building services Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 08:19, Uncontrolled Copy, (c) BSIBS EN 13141-7:2010EN 13141-
35、7:2010 (E) 5 Introduction This European Standard specifies methods for the performance testing of components used in residential ventilation systems to establish the performance characteristics as identified in EN 13142. This European Standard does not contain any information on ductwork and fitting
36、s, which are covered by other European Standards. The standard can be used for the following applications: laboratory testing; attestation purposes. 1 Scope This part of EN 13141 specifies the laboratory test methods and test requirements for the testing of aerodynamic, thermal and acoustic performa
37、nce, and the electrical performance characteristic of a mechanical supply and exhaust ventilation units used in a single dwelling. It covers unit that contain at least, within one or more casing: supply and exhaust air fans; air filters; air-to-air heat exchanger and/or Extract Air-to-Outdoor Air he
38、at pump for extract air heat recovery; control system. Such unit can be provided in more than one assembly, the separate assemblies of which are designed to be used together. The different possible arrangements of heat recovery heat exchangers and/or heat pumps are described in Annex A. This standar
39、d does not deal with non-ducted units or reciprocating heat exchangers. This standard does not deal with units that supply several dwellings. This standard does not cover ventilation systems that may also provide water space heating and hot water. This standard does not cover units including combust
40、ion engine driven compression heat pumps and absorption heat pumps. Electrical safety requirements are given in EN 60335-2-40 and EN 60335-2-80. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 03/06/2011 08:19, Uncontrolled Copy, (c) BSIBS EN 13141-7:2010EN 13141-7:2010 (E) 6 2 Normative refe
41、rences The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 306, Heat exchangers Methods o
42、f measuring the parameters necessary for establishing the performance EN 12792:2003, Ventilation for buildings Symbols, terminology and graphical symbols EN 13141-4, Ventilation for buildings Performance testing of components/products for residential ventilation Part 4: Fans used in residential vent
43、ilation systems EN 14511-2, Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 2: Test conditions EN 14511-3, Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heatin
44、g and cooling Part 3: Test methods EN 14511-4, Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 4: Requirements EN ISO 3741, Acoustics Determination of sound power levels of noise sources using sound pressure Precision
45、methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001) EN ISO 3743-1, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant fields Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) EN ISO 3743-
46、2, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) EN ISO 3744, Acoustics Determination of sound power levels of noise sourc
47、es using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 3745, Acoustics Determination of sound power levels of noise sources using sound pressure Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003) EN ISO 5135, Acousti
48、cs Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) EN ISO 5136, Acoustics Determination of sound power radiated into a duct by fans and other air-moving devices In-duct method (ISO 5
49、136:2003) EN ISO 9614-1, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points (ISO 9614-1:1993) EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2:1996) 3
