1、Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Copy, (c) BSIg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58r
2、emoval devices Requirements for performance, safety and testingICS 91.140.60Water conditioning equipment inside buildings Nitrate BRITISH STANDARDBS EN 15219:2006 +A1:2007BS EN 15219:2006+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Copy, (c) BSIThis B
3、ritish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2008ISBN 978 0 580 63823 7Amendments/corrigenda issued since publicationDate Comments31 July 2008 Implementation of CEN amendment A1:2007B/504, Water supply.A list of organizations
4、 represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Natio
5、nal forewordThis British Standard is the UK implementation of EN 15219:2006+A1:2007. It supersedes BS EN 15219:2006 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN ame
6、ndment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted to Technical Committee EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15219:2006+A1 November 2007 ICS 91.140.60 Supersedes EN 15219:2006 English Version Water conditio
7、ning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing Appareils de traitement deau lintrieur des btiments - Dispositifs de dnitratation - Exigences de performances, de scurit et dessais Anlagen zur Behandlung von Trinkwasser innerhalb von Gebude
8、n - Nitratentfernungsanlagen - Anforderungen an Ausfhrung, Sicherheit und Prfung This European Standard was approved by CEN on 4 November 2006 and includes Amendment 1 approved by CEN on 21 October 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co
9、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in t
10、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies o
11、f Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEA
12、N COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15219:2006+A1:2007: ELicensed
13、 Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Copy, (c) BSIEN 15219:2006+A1:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Requirements.7 4.1 Nitrate removal devices specification .7 4.2 Quality of materials and chem
14、icals7 4.3 Design and manufacturing specifications 7 4.4 Operating specifications.9 4.5 Installation specifications.10 5 Labelling .10 5.1 Identification of equipment.10 5.2 Safety labelling.10 6 Technical documentation .10 7 Test methods11 7.1 Test conditions 11 7.2 Anion exchange resin .13 7.3 Tec
15、hnical documentation .13 7.4 Manufacturing tests.13 7.5 Operating characteristics .15 Annex A (informative) Principles of nitrate reduction using anionic exchange resins .18 Annex B (normative) Installation, operation and maintenance20 Bibliography 25 BS EN 15219:2006+A1:2007Licensed Copy: Wang Bin,
16、 ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Copy, (c) BSIEN 15219:2006+A1:2007 (E) 3 Foreword This document (EN 15219:2006+A1:2007) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This document shall be given the status
17、 of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008 and conflicting national standards shall be withdrawn at the latest by May 2008. This document includes Amendment 1, approved by CEN on 2007-10-21. This document supersedes EN 15219:2006.
18、 The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. With respect of potential adverse effects on the quality of water intended for human consumption caused by the product covered by this European Standard, the following is pointed out to the user: 1
19、) this European Standard provides no information as to whether the product may be used without restriction in any of the Member States; 2) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics
20、 of this product remain in force. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
21、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15219:2006+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Cop
22、y, (c) BSIEN 15219:2006+A1:2007 (E) 4 1 Scope This European Standard specifies requirements relating to the construction and mode of operation and relevant methods for testing automatic, salt-regenerated, anion exchange nitrate removal devices for drinking water installations inside buildings, which
23、 are permanently connected to the mains supply. NOTE Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member States relevant regulators and the EC Commission agr
24、eed on the principle for a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level. If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136, which will
25、contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable. 2 Normative references The following referenced documents are indispensable for the application of this document. F
26、or dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 973, Chemicals used for treatment of water intended for human consumption Sodium chloride for regeneration of ion exchangers EN 1717, Prot
27、ection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow EN 14743, Water conditioning equipment inside buildings Softeners Requirements for performance, safety and testing !EN 15161, Water conditioning equipment inside buil
28、dings Installation, operation, maintenance and repair“ EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2001, modified) EN ISO 228-1, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and design
29、ation (ISO 228-1:2000) EN ISO 3822-1, Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 1: Method of measurement (ISO 3822-1:1999) EN ISO 3822-3, Acoustics Laboratory tests on noise emission from appliances and equipment used in water
30、supply installations Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1984) EN ISO 10304-1, Water quality Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulphate ions, using liquid chromatography of ions Part 1: Met
31、hod for water with low contamination (ISO 10304-1:1992) EN ISO 11885, Water quality Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996) ISO 7-1, Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and de
32、signation BS EN 15219:2006+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Copy, (c) BSIEN 15219:2006+A1:2007 (E) 5 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 blending device internal or exter
33、nal device used to blend treated with untreated water 3.2 brining main phase of the regeneration process, during the course of which the brine flows through the bed of resin for the purpose of exchanging the nitrate ions fixed during the service run by chloride ions, and thereby recovering the excha
34、nge capacity of the resin bed 3.3 brining efficiency link, expressed in grams of nitrate ion (NO3-) per kilogram of salt, between the exchange capacity and the salt consumption 3.4 anion exchange resin synthetic material that has the capability to exchange anions reversibly 3.5 continuous flow rate
35、maximum flow rate at which a duplex appliance can operate continuously (24 h a day) without a premature breakthrough of nitrate 3.6 duplex appliance system employing two resin tanks, enabling the production of uninterrupted treated water supply 3.7 exchange capacity of the nitrate removal unit quant
36、ity of nitrate, expressed in grams of nitrate ion, fixed by the device between the end of the last regeneration and the beginning of the exhaustion of the resin NOTE 1 The end of the regeneration is defined as the moment when the unit is available for service. NOTE 2 The resin is considered to be ex
37、hausted when the residual nitrate concentration of the treated water increases above a defined value. 3.8 monitoring device time controller, flow integrator, resin exhaustion sensor or a combination of these, used to determine the appropriate moment in the operating cycle for regeneration to begin a
38、nd to initiate that regeneration 3.9 nominal flow rate flow rate of water, expressed in cubic metres per hour, at which a pressure drop of maximum 100 kPa is established 3.10 operating cycle two successive and repetitive runs: the treated water run (or service) and the regeneration run BS EN 15219:2
39、006+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Copy, (c) BSIEN 15219:2006+A1:2007 (E) 6 3.11 operating range physical and chemical conditions (temperature, pressure, flow rate, chemical water composition) within which a nitrate removal unit can opera
40、te and meet its performance guarantees 3.12 pressure drop decrease in pressure between the inlet and outlet of the unit, expressed in kilopascals, at nominal flow rate 3.13 regeneration process part of operating cycle, during which all the operations needed to restore the ion exchange capacity of a
41、resin bed are carried out 3.14 regeneration water quantity of water, expressed in litres (or in cubic meters), necessary for a complete regeneration process, including water used for the preparation of the brine 3.15 residual nitrate concentration nitrate concentration of water sampled at the outlet
42、 of a unit during the service run 3.16 salt consumption quantity of salt, expressed in kilograms, used for each regeneration 3.17 salt tank tank containing the regenerating salt and the brine production device 3.18 nitrate removal device complete installation necessary for the production of treated
43、water 3.19 nitrate removal unit appliance employing the anion exchange principle and which generally comprises the following constituent parts: pressure vessel containing the anionic ion exchange resin and devices for distributing and collecting hydraulic flows; devices for monitoring hydraulic flow
44、s (water and brine) through a multi-way valve or a set of pipes and multiple valves; tank (called salt-tank) for storage of the regeneration salt and production of the brine 3.20 volume of resin quantity of anion exchange resin, expressed in litres, indicated on the rating plate or in the technical
45、documentation BS EN 15219:2006+A1:2007Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 16/10/2008 08:07, Uncontrolled Copy, (c) BSIEN 15219:2006+A1:2007 (E) 7 4 Requirements 4.1 Nitrate removal devices specification Nitrate removal devices shall include all of following features and equipment:
46、 a) resin tank, control valve, brine tank, monitoring device; b) automatic regeneration; c) continuity of supply during regeneration; d) manual override facility; e) protection against backflows. Some devices in the market are intended to remove nitrates and to soften water simultaneously (see Annex
47、 A). These are commonly known as “mixed beds” and include a mixture of anionic and cationic resin that regenerates simultaneously. These devices shall comply with this European Standard and also with EN 14743, except for the items stated in 4.3.8 and 4.4.4 and relevant tests that are specifically co
48、vered in this European Standard for this kind of devices. NOTE When necessary to meet national or local provisions, the nitrate removal devices may be required to include additional features; for example: automatic initiated regeneration after a certain period without regeneration; feature to contro
49、l microbiological growth. 4.2 Quality of materials and chemicals 4.2.1 Anion exchange resin The anion exchange resin used in the nitrate removal device shall be certified by the resin manufacturer to be suitable for its intended application. 4.2.2 Regenerating salt Salt shall comply with national and local regulations. All requirements of this European Standard are based on the use of sodium chloride (NaCl) in accordance with EN 973 as regenerating salt. NOTE Some countries also allow the use of potassium chloride (KCl) as reg
