1、BSI Standards Publication BS EN 16454:2015 Intelligent transport systems ESafety ECall end to end conformance testingBS EN 16454:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of EN 16454:2015. It supersedes PD CEN/TS16454:2013 which is withdrawn. The UK parti
2、cipation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users a
3、re responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 86493 3 ICS 35.240.60 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority o
4、f the Standards Policy and Strategy Committee on 30 September 2015. Amendments/corrigenda issued since publication Date T e x t a f f e c t e dBS EN 16454:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16454 September 2015 ICS 35.240.60 Supersedes CEN/TS 16454:2013 English Version Intellig
5、ent transport systems - ESafety - ECall end to end conformance testing Systmes de transport intelligents - eScurit - Essais de conformit du systme “ eCall “ de bout en bout Intelligente Verkehrssysteme - ESicherheit - Vollstndige Konformittsprfungen fr eCall This European Standard was approved by CE
6、N on 17 July 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m
7、ay be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified
8、 to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icelan
9、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Managem
10、ent Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16454:2015 EBS EN 16454:2015 EN 16454:2015 (E) 2 Contents Page European foreword . 9 Introduction . 10 1 Scope . 11 2 Normative refe
11、rences . 11 3 Terms and definitions 12 4 Symbols and abbreviations 17 5 Conformance 19 5.1 General . 19 5.2 General conditions . 19 6 General overview of the eCall transaction for pan-European eCall . 20 7 How to use this Standard . 24 7.1 Layout and procedures 24 7.2 System under test . 25 7.3 Acce
12、lerated test procedures 26 7.4 Accelerated test procedures for IVSs 26 7.4.1 Accelerated test procedures for all types of PE eCall IVS 26 7.4.2 Additional accelerated test procedures for PE eCall only IVS 28 7.5 Accelerated test procedures for MNOs . 28 7.6 Accelerated test procedures for PSAPs PE e
13、Call 29 7.7 Accelerated test procedures for PSAPs TPS-eCall . 30 7.8 Accelerated test procedures for TPSPs 30 8 Requirements 31 8.1 Requirements - General objectives 31 8.1.1 State transitions 31 8.1.2 Classification of testing 41 8.1.3 CTP naming conventions . 43 8.1.4 CTP naming convention for IVS
14、 conformance tests . 44 8.2 CTP structure . 44 9 Conformance test requirements for in-vehicle user equipment and systems (IVS) 46 9.1 Conformance test requirements for in-vehicle user equipment and systems for Pan European eCall 46 9.2 Test objectives and purposes 46 9.3 Classification of testing an
15、d referenced tests for in-vehicle user equipment for Pan European eCall IVS . 46 9.3.1 Taxonomy of testing 46 9.3.2 Referenced tests . 46 9.4 State transition conformance tests for in-vehicle equipment and system to comply to Standards for pan European eCall 47 9.4.1 Conformance requirement . 47 9.4
16、.2 Use case test objectives by stage . 47 9.4.3 CTP 1.1.0.1 Conformance to ETSI TS 102 936-1 and ETSI TS 102 936-2 PE eCall IVS 50 9.4.4 CTP 1.1.0.2 Test for conformance to valid SIM/USIM PE eCall . 51 BS EN 16454:2015 EN 16454:2015 (E) 3 9.4.5 CTP 1.1.0.3 Automatic eCall triggering does not occur w
17、hen ignition OFF PE eCall IVS . 52 9.4.6 CTP 1.1.1.1 Power on and self test PE eCall IVS . 53 9.4.7 CTP 1.1.2.1 eCall automatically activated PE eCall IVS 54 9.4.8 CTP 1.1.2.2 Automatically triggered eCall in progress was not disconnected upon a new eCall trigger PE eCall IVS 55 9.4.9 CTP 1.1.2.3 Po
18、st-side-crash performance of automatic trigger - IVS 56 9.4.10 CTP 1.1.2.4 Post-frontal-crash performance of automatic trigger - IVS . 57 9.4.11 CTP 1.1.2.5 Performance of automatic trigger different crash types - IVS. 58 9.4.12 CTP 1.1.3.1 eCall manually activated PE eCall IVS 59 9.4.13 CTP 1.1.3.2
19、 Manually triggered eCall in progress was not disconnected upon a new eCall trigger PE eCall IVS . 60 9.4.14 CTP 1.1.4.1 Test eCall activated PE eCall IVS 61 9.4.15 CTP 1.1.5.1 Network registration PE eCall IVS . 62 9.4.16 CTP 1.1.5.2 Manual termination of eCall by vehicle occupants not allowed (aut
20、omatically triggered eCall) PE eCall IVS 63 9.4.17 CTP 1.1.5.3 Manual termination of eCall by vehicle occupants not allowed (manually triggered eCall) PE eCall IVS . 64 9.4.18 CTP 1.1.5.4 Automatically triggered eCall in progress was not disconnected when ignition is switched to OFF PE eCall IVS . 6
21、5 9.4.19 CTP 1.1.5.5 Manually triggered eCall in progress was not disconnected when ignition is switched to OFF PE eCall IVS . 66 9.4.20 CTP 1.1.5.6 Priority over conflicting communication PE eCall IVS . 67 9.4.21 CTP 1.1.5.7 Network registration is re-tried when network registration attempt was not
22、 successful PE eCall IVS . 68 9.4.22 CTP 1.1.6.1 Mute IVS and vehicle audio PE eCall IVS 68 9.4.23 CTP 1.1.7.1 Set-up TS12 call with eCall identifier (flag) set to automatic PE eCall IVS . 69 9.4.24 CTP 1.1.8.1 Set-up TS12 call with eCall identifier (flag) set to manual PE eCall IVS . 70 9.4.25 CTP
23、1.1.9.1 Set-up TS11 call to test number PE eCall IVS . 71 9.4.26 CTP 1.1.10.1 eCall is attempted when no networks are available (limited service condition) PE eCall IVS. 72 9.4.27 CTP 1.1.10.2 Re-dial attempt completed within 2 minutes after eCall is dropped PE eCall IVS 73 9.4.28 CTP 1.1.10.3 Durat
24、ion of eCall Initiation signal PE eCall IVS 74 9.4.29 CTP 1.1.11.1 Send MSD with indicator set to Automatically Initiated eCall (AleC) PE eCall IVS 75 9.4.30 CTP 1.1.12.1 Send MSD with indicator set to Manually Initiated eCall (MleC) PE eCall IVS 76 9.4.31 CTP 1.1.13.1 Send MSD with indicator set to
25、 Test Call PE eCall IVS 77 9.4.32 CTP 1.1.14.1 Verify MSD transfer PE eCall IVS . 78 9.4.33 CTP 1.1.14.2 Un-mute IVS audio when AL-ACK received PE eCall IVS . 79 9.4.34 CTP 1.1.15.1 Establish voice link to PSAP PE eCall IVS 80 9.4.35 CTP 1.1.15.2 MSD transfer request while eCall conversation in prog
26、ress PE eCall IVS . 81 9.4.36 CTP 1.1.15.3 eCall continuation when SEND MSD request not received (T5 expired) PE eCall IVS 83 9.4.37 CTP 1.1.15.4 Call continuation when AL-ACK not received (T6 expired) PE eCall IVS . 84 9.4.38 CTP 1.1.15.5 MSD is transferred continuously until T7 expires and IVS rec
27、onnects loudspeaker and microphone on its expiry PE eCall IVS 85 9.4.39 CTP 1.1.16.1 Clear down call automatically PE eCall IVS 86 9.4.40 CTP 1.1.16.2 IVS clears down the eCall upon T2 expiry PE eCall IVS . 88 9.4.41 CTP 1.1.16.3 IVS registers recent eCalls PE eCall IVS . 89 BS EN 16454:2015 EN 1645
28、4:2015 (E) 4 9.4.42 CTP 1.1.17.1 Call-back allowed and able to be answered by IVS PE eCall IVS 90 9.4.43 CTP 1.1.17.2 Call-back answered by IVS in the event of abnormal termination PE eCall IVS . 91 9.4.44 CTP 1.1.17.3 MSD transfer occurs upon PSAP request during call-back PE eCall IVS 92 9.4.45 CTP
29、 1.1.17.4 Remain registered for 1 hr PE eCall IVS . 93 9.5 State transition test scripts for in-vehicle equipment and system to comply to Standards for pan European eCall additional tests for eCall only systems 94 9.5.1 General . 94 9.5.2 CTP 1.1.1.2 IVS does not perform registration after power-up
30、PE eCall only IVS . 95 9.5.3 CTP 1.1.1.3 IVS periodically scans and maintains a list of available PLMNs PE eCall only . 95 9.5.4 CTP1.1.10.4 Verify that PLMN registration procedure is executed upon initiating an eCall PE eCall only IVS. 96 9.5.5 CTP 1.1.17.5 Remain registered for 1 hr 12 hr PE eCall
31、 only IVS 97 9.6 State transition conformance test requirements for in-vehicle user equipment for eCall TPS-IVS via a third party service provider . 98 9.6.1 General . 98 9.6.2 Test objectives and purposes 98 9.6.3 Taxonomy of testing and referenced tests 98 9.6.4 Taxonomy of testing 98 9.7 Use case
32、 conformance tests for in-vehicle equipment and system to comply to Standards for third party service provider eCall 98 9.7.1 Conformance requirement . 98 9.7.2 Use case test objectives by stage . 99 9.8 State transition test scripts for TPS in-vehicle equipment and system to comply to Standards for
33、 third party services supported eCall 101 9.8.1 General . 101 9.8.2 CTP 1.2.0 Pre operation - TPS-IVS 102 9.8.3 CTP 1.2.1 Power on self test - TPS-IVS . 104 9.8.4 CTP 1.2.2 Automatically activate eCall - TPS-IVS . 105 9.8.5 CTP 1.2.3 Manually activate eCall - TPS-IVS . 113 9.8.6 CTP 1.2.4 Stop confl
34、icting communication TPS-IVS . 117 9.8.7 CTP 1.2.5 Establish voice link to TPSP - TPS-IVS 118 9.8.8 CTP 1.2.6 Send IVS dataset to TPSP - TPS-IVS 123 9.8.9 CTP 1.2.7 Establish voice link between PSAP and occupants - TPS-IVS . 129 9.8.10 CTP 1.2.8 Cleardown call - TPS-IVS . 130 9.8.11 CTP 1.2.9 Allow
35、call-cack into vehicle - TPS-IVS . 131 10 Conformance tests for mobile network operators . 136 10.1 Test objectives and purposes 136 10.1.1 General . 136 10.1.2 Default assumptions . 136 10.2 Taxonomy of testing and referenced tests 136 10.3 Use case conformance tests for mobile network operator sys
36、tems to comply to Standards for pan European eCall 136 10.3.1 Conformance requirement . 136 10.3.2 Use case test objectives by stage . 136 10.4 State transition test scripts for mobile network operators to demonstrate compliance with Pan European eCall Standards 138 10.4.1 General . 138 10.4.2 CTP 2
37、.0.1 Keep SIMs/USIMs alive even though not in regular operation MNO . 139 10.4.3 CTP 2.0.2 MNO supports general eCall relevant requirements . 140 10.4.4 CTP 2.0.3 Decommission SIM/USIM - MNO . 141 10.4.5 CTP 2.0.4 Support eCall Flag MNO 142 BS EN 16454:2015 EN 16454:2015 (E) 5 10.4.6 CTP 2.1.1 Accep
38、t registration Home network MNO 142 10.4.7 CTP 2.1.2 Accept registration Roaming MNO 143 10.4.8 CTP 2.2.1.1 Receive TS12 voice call (automatically initiated) MNO 144 10.4.9 CTP 2.2.1.2 Route call to most appropriate PSAP MNO 145 10.4.10 CTP 2.2.1.3 Provide TS12 data/caller ID MNO 146 10.4.11 CTP 2.2
39、.2.1 Receive TS12 voice call (manual initiated) MNO 147 10.4.12 CTP 2.2.3.1 Test for receiving test eCall (TS11). 147 10.4.13 CTP 2.2.3.2 Route call to non-emergency number MNO 147 10.4.14 CTP 2.2.3.3 Provide TS11 data MNO . 148 10.4.15 CTP 2.3.1 Call in progressMNO 148 10.4.16 CTP 2.4.1 Call cleard
40、own MNO 149 10.4.17 CTP 2.5.1 Support call-back MNO 150 10.4.18 CTP 2.6.1 Maintain registration for 1-12 hours MNO . 150 10.4.19 CTP 2.7.1 Maintain call records - MNO 150 10.5 Use case conformance tests for mobile network operator systems to comply to Standards for TPS-eCall . 151 10.5.1 Conformance
41、 requirement . 151 10.5.2 Use case test objectives by stage 151 10.6 State transition test scripts for mobile network operators to demonstrate compliance with TPS-eCall Standards 151 10.6.1 CTP 2.11.1 MNO supports general TPS-eCall relevant requirements . 151 10.6.2 CTP 2.11.2 Support call-back MNO
42、151 11 Conformance tests for PSAP systems 152 11.1 Test objectives and purposes 152 11.2 Taxonomy of testing and referenced tests 152 11.2.1 Taxonomy of testing . 152 11.2.2 Referenced tests . 152 11.3 Use case conformance tests for PSAP systems to comply to Standards for pan European eCall 152 11.3
43、.1 Conformance requirement . 152 11.3.2 Use case test objectives by stage 152 11.4 State transition conformance tests for PSAPs PE eCall . 153 11.4.1 General 153 11.4.2 CTP 3.1.0.1 Provide MNOs with appropriate routing data Member State/ PSAP PE eCall 155 11.4.3 CTP 3.1.0.2 Maintain map geo-informat
44、ion PSAP PE eCall . 156 11.4.4 CTP 3.1.1.1 Receive automatically initiated eCall PSAP PE eCall 157 11.4.5 CTP 3.1.1.2 Receive manually initiated eCall PSAP PE eCall . 158 11.4.6 CTP 3.1.2 Receive TS12 data- Caller ID & location PSAP PE eCall 159 11.4.7 CTP 3.1.3.1 Recognise eCall and route to in-ban
45、d modem PSAP PE eCall 160 11.4.8 CTP 3.1.3.2 PSAP equipment failure PSAP PE eCall . 161 11.4.9 CTP 3.1.3.3 PSAP modem failure before link layer ACK is sent PSAP PE eCall 162 11.4.10 CTP 3.1.4 eCall received at in-band modem PSAP PE eCall . 163 11.4.11 CTP 3.1.5.1 Validate initiation signal PSAP PE e
46、Call 164 11.4.12 CTP 3.1.5.2 Route to operator after T4 expiration PSAP PE eCall . 165 11.4.13 CTP 3.1.6 Request MSD PSAP PE eCall 166 11.4.14 CTP 3.1.7.1 Receive MSD PSAP PE eCall 167 11.4.15 CTP 3.1.7.2 Verify status bit in AL-ACK upon positive ACK PSAP PE eCall 168 11.4.16 CTP 3.1.7.3 Verify MSD
47、transfer upon T8 expiration PSAP PE eCall 169 11.4.17 CTP 3.1.7.4 Verify transfer of corrupted MSD PSAP PE eCall 170 11.4.18 CTP 3.1.7.5 Verify PSAP behaviour when MSD format check fails PSAP PE eCall 171 11.4.19 CTP 3.1.8 ACK PSAP PE eCall 171 11.4.20 CTP 3.1.9 Route voice and MSD to operator PSAP
48、PE eCall 172 BS EN 16454:2015 EN 16454:2015 (E) 6 11.4.21 CTP 3.1.10 Display TS12 data and MSD to operator PSAP PE eCall . 173 11.4.22 CTP 3.1.11 Decode VIN PSAP PE eCall . 174 11.4.23 CTP 3.1.12 Talk to vehicle occupants PSAP PE eCall . 175 11.4.24 CTP 3.1.13 Request new MSD before call cleardown PSAP PE eCall 176 11.4.25 CTP 3.1.14.1 Call cleardown PSAP PE eCall 177 11.4.26 CTP 3.1.14.2 Verify status bit in AL-ACK upon cleardown - PSAP PE eCall . 178 11.4.27 CTP 3.1.15 Call-back to vehicle PSAP PE eCall . 179 11.4.28 CTP 3.1.16 Request new MSD after call cleardown PSAP
