1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 45510-4-2:1999 The
2、European Standard EN 45510-4-2:1999 has the status of a British Standard ICS 27.060.30; 27.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 2: Gas-air, steam-air and gas-gas heatersThis Brit
3、ish Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 1999 BSI 09-1999 ISBN 0 580 32505 9 BS EN 45510-4-2:1999 Amendments issued since publication Amd. No. Date Co
4、mments National foreword This British Standard is the English language version of EN 45510-4-2:1999. The UK participation in its preparation was entrusted to Technical Committee E/-/20, Power engineering steering committee, which has the responsibility to: aid enquirers to understand the text; prese
5、nt to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on r
6、equest to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility o
7、f the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.
8、 Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.CEN CENELEC CEN Central Secretariat: rue de Stassart, 36 B-1050 Brussels
9、CENELEC Central Secretariat: rue de Stassart, 35 B-1050 Brussels 1999 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref No. EN 45510-4-2:1999 E EUROPEAN STANDARD EN 45510-4-2 NORME EUROPE ENNE EUROPA ISCHE NOR
10、M April 1999 ICS 27.040; 27.060.30; 27.100 English version Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 2: Gas-air, steam-air and gas-gas heaters Guide pour lacquisition de quipements destine s aux centrales de production de lectricite Partie 4: Auxiliaires de
11、chaudie re Section 2: Re chauffeurs gaz-air, vapeur-air, gaz-gaz Leitfaden fu r die Beschaffung von Ausru stungen fu r Kraftwerke Teile 4: Nebenanlagen Hauptabschnitt 2: Gas/Luft-, Dampf/Luft- und Gas/Gas-Wa rmeaustauscher This European Standard was approved by CEN/CENELEC on 1 April 1999. CEN/CENEL
12、EC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap
13、plication to the Central Secretariat or to any CEN/CENELEC member. This European Standard exists in three official versions (English, French,German). A version in any other language made by translation under the responsibility of a CEN/CENELEC member into its own language and notified to the Central
14、 Secretariat has the same status as the official versions. CEN/CENELEC members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland And United K
15、ingdom.Page 2 EN 45510-4-2:1999 BSI 09-1999 Foreword This European Standard has been prepared by Technical Committee CEN/CLC JTFPE, Joint task force power engineering, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publicat
16、ion of an identical text or by endorsement, at the latest by October 1999, and conflicting national standards shall be withdrawn at the latest by October 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement th
17、is European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This standard takes the form of a recommendation and is therefore entitled a “guid
18、e”. This guide for procurement is a part of a series of guides mandated to cover the procurement of power station plant and equipment in conformity with European Procurement Directives. The guides are: EN 45510 Guide for procurement of power station equipment; Part 1: Common Clauses; Part 2-1: Elect
19、rical equipment Power transformers; Part 2-2: Electrical equipment Uninterruptible power supplies.; Part 2-3: Electrical equipment Stationary batteries and chargers; Part 2-4: Electrical equipment High power static convertors; Part 2-5: Electrical equipment Motors; Part 2-6: Electrical equipment Gen
20、erators; Part 2-7: Electrical equipment Switchgear and control gear; Part 2-8: Electrical equipment Power cables; Part 2-9: Electrical equipment Cabling systems; Part 3-1: Boilers Water tube boilers; Part 3-2: Boilers Shell boilers; Part 3-3: Boilers Boilers with fluidized bed firing; Part 4-1: Boil
21、er auxiliaries Equipment for reduction of dust emissions; Part 4-2: Boiler auxiliaries Gas-air, steam-air and gas-gas heaters; Part 4-3: Boiler auxiliaries Draught plant; Part 4-4: Boiler auxiliaries Fuel preparation equipment; Part 4-5: Boiler auxiliaries Coal handling and bulk storage plant; Part
22、4-6: Boiler auxiliaries Flue gas desulphurisation (De-S0 x ) plant; Part 4-7: Boiler auxiliaries Ash handling plant; Part 4-8: Boiler auxiliaries Dust handling plant; Part 4-9: Boiler auxiliaries Sootblowers; Part 4-10: Boiler auxiliaries Flue gas denitrification (De-N0 x ) plant; Part 5-1: Turbines
23、 Steam turbines; Part 5-2: Turbines Gas turbines; Part 5-3: Turbines Wind turbines; Part 5-4: Turbines Hydraulic turbines, storage pumps and pump-turbines; Part 6-1: Turbine auxiliaries Deaerators; Part 6-2: Turbine auxiliaries Feedwater heaters; Part 6-3: Turbine auxiliaries Condenser plant; Part 6
24、-4: Turbine auxiliaries Pumps; Part 6-5: Turbine auxiliaries Dry cooling systems; Part 6-6: Turbine auxiliaries Wet and wet/dry cooling towers; Part 6-7: Turbine auxiliaries Moisture separator reheaters; Part 6-8: Turbine auxiliaries Cranes; Part 6-9: Turbine auxiliaries Cooling water systems; Part
25、7-1: Pipework and valves High pressure piping systems; Part 7-2: Pipework and valves Boiler and high pressure piping valves; Part 8-1: Control and instrumentation; EN 45510-1 contains those clauses common to all the above guides giving the provisions of a non equipment specific nature for use in the
26、 procurement of power station plant. EN 45510 is the responsibility of JTFPE. The so called “common clauses”, as appropriate, also appear in italics in the documents specific to particular equipment. In this guide, words in bold type indicate that they have the meaning given in the definitions, clau
27、se 3. In this guide, words and sentences not in italics are specific to this guide and refer to the particular equipment covered.Page 3 EN 45510-4-2:1999 BSI 09-1999 Contents Page Foreword 2 1 Scope 4 2 Normative references 4 3 Definitions 4 3.1 Organizational terms 4 3.2 Technical terms 5 3.3 Gener
28、al terms 5 4 Brief overall project description 6 4.1 Role and organization of purchaser 6 4.2 Site location 6 4.3 Equipment task 6 4.4 Equipment to be purchased 6 4.5 Control and instrumentation 7 4.6 Electrical supplies and other services 7 4.7 Other interfaces 7 4.8 Project programme 7 4.9 Equipme
29、nt identification systems 7 5 Extent of supply 7 6 Terminal points 8 7 Operational requirements 8 7.1 Operating environment 8 7.2 Manning levels 8 7.3 Normal operation 8 7.4 Operating hours 8 7.5 Start-up and shut-down 8 7.6 Abnormal conditions 8 7.7 Further operational requirements 9 8 Life expecta
30、ncy 9 8.1 Design life 9 8.2 Components requiring periodic maintenance 9 9 Performance requirements 9 9.1 Duty 9 9.2 Performance 10 9.3 Equipment margins 10 9.4 Availability 11 9.5 Levels of component redundancy 11 9.6 Further performance requirements 11 10 Design and fabrication 11 10.1 Specific equ
31、ipment features 11 10.2 Material selection 12 10.3 Safety 12 Page 10.4 Interchangeability 13 10.5 Fabrication methods 13 11 Maintenance requirements 13 11.1 Planned maintenance 13 11.2 Personnel safety 13 11.3 Requirements for access 13 11.4 Lifting requirements 13 11.5 Special tools 13 11.6 Test eq
32、uipment 13 11.7 Spare parts strategy 13 11.8 Special precautions 14 12 Technical documentation requirements 14 12.1 Tender documentation 14 12.2 Contract documentation 14 13 Applicable legislation, regulations, standards and further requirements 14 13.1 Legislation and regulations 14 13.2 Standards
33、14 13.3 Further requirements 14 14 Evaluation criteria 14 14.1 General 14 14.2 Technical criteria 15 15 Quality measures 15 15.1 General 15 15.2 Approvals procedure 15 15.3 Inspection requirements 15 15.4 Non-conformity 15 16 Site factors 15 16.1 Access 15 16.2 Facilities 15 16.3 Site specific requi
34、rements 16 17 Verification of specified performance 16 17.1 General 16 17.2 Works tests 16 17.3 Test during installation and commissioning 16 17.4 Technical conditions for trial run 16 17.5 Functional and performance tests 17 Annex A (informative) Bibliography 17Page 4 EN 45510-4-2:1999 BSI 09-1999
35、1 Scope This standard gives guidance on writing the technical specification for the procurement of air heating equipment associated with steam generating plant and gas reheating equipment associated with flue gas treatment plant for use in electricity generating stations (power stations). This guide
36、 for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this guide. This guide covers heat exchangers of the following types: indirect heating wit
37、h steam; rotary regenerative heaters; tubular/plate recuperative heaters; liquid coupled heat exchangers; heat pipes. This guide does not cover systems for direct contact heating of air or flue gas by hot gases. The equipment covered by this guide is defined by its function rather than design type.
38、Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This guide indicates to potential purchasers how their specification should be prepared so that: the equipment type and capacity interfac
39、es correctly with other elements of the systems; predicted performance is achieved; ancillary equipment is properly sized; reliability, availability and safety requirements are achieved; proper consideration is given to the evaluation process and the quality measures to be applied. This guide does n
40、ot determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchasers project strategy. It does not cover: any commercial, contractual or legal issues which are normally in separate part
41、s of an enquiry; any allocation of responsibilities which are determined by the contract. This guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this guide does not address the environmental imp
42、lications of the equipment. 2 Normative references This guide for procurement incorporates by dated or undated reference, provisions from other publications. These normative references are cited in the appropriate places in the text and the publications are listed hereafter. For dated references, su
43、bsequent amendments to or revisions of any of these publications apply to this guide only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. EN ISO 9001, Quality systems Model for quality assurance in design, developme
44、nt, production, installation and servicing (ISO 9001:1994). EN ISO 9002, Quality systems Model for quality assurance in production, installation and servicing (ISO 9002:1994). IEC 60050 (191), International electrotechnical vocabulary. 3 Definitions For the purposes of this guide, the following defi
45、nitions apply. 3.1 Organizational terms 3.1.1 purchaser recipient of a product and/or a service provided by a supplier 3.1.2 supplier person or organization that provides a product and/or a service to the purchaser 3.1.3 specification document stating technical requirements of the purchaser. It may
46、form part of an enquiry issued by a purchaser 3.1.4 enquiry invitation to tender issued by a purchaser. It will normally include a specification together with the necessary contractual and commercial conditions 3.1.5 tender offer made by a tenderer in response to an enquiry 3.1.6 tenderer person or
47、organization submitting a tender for the equipment in response to the enquiryPage 5 EN 45510-4-2:1999 BSI 09-1999 3.1.7 site place to which the equipment is to be delivered or where work is to be done by the supplier, together with so much of the area surrounding as the supplier may, with the consen
48、t of the purchaser, use for the purposes of the contract NOTE Further definitions of useful organizational terms may be found in EN ISO 8402 (see annex A). 3.2 Technical terms 3.2.1 heat exchanger equipment for transferring heat from one fluid to another. For this guide, the generic term “heat excha
49、nger” has been used where clauses cover gas-air, steam-air and gas-gas reheaters 3.2.2 airheater heat exchanger for utilizing residual heat from the dust laden gas leaving the economizer of the boiler to heat combustion air, dry solid fuel and thereby maximize the thermal efficiency of the boiler 3.2.3 primary airheater heat exchanger that provides hot air to dry and transport solid fuels to the burners. It may be a separate heat exch
