1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 45510-6-3:1998 The
2、European Standard EN 45510-6-3:1998 has the status of a British Standard ICS 27.040; 27.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Guide for procurement of power station equipment Part 6-3: Turbine auxiliaries Condenser plantThis British Standard, having been prepared
3、 under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1998 BSI 1998 ISBN 0 580 29218 5 BS EN 45510-6-3:1998 Amendments issued since publication Amd. No. Date Text affected National foreword This British Standard
4、 is the English language version of EN 45510-6-3:1998. The UK participation in its preparation was entrusted to Technical Committee E/-/20, Power engineering steering committee, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any e
5、nquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The
6、British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A Br
7、itish Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a fr
8、ont cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover.CEN/CENELEC CEN Central Secretariat rue de Stassart 36, B-1050 Brussels CENELEC Central Secretariat rue de Stassart 35, B-1050 Brussels 1998 CEN/CENELEC All rights of exploitation in any form and by any means reserve
9、d worldwide for CEN national Members and for CENELEC Members. Ref. No. 45510-6-3:1998 E EUROPEAN STANDARD EN 45510-6-3 NORME EUROPE ENNE EUROPA ISCHE NORM January 1998 ICS 27.040: 27.100 Descriptors: Electric power stations, turbines, installation, condensation, purchase, user supplier relations, in
10、vitation of tenders, specifications, technical writing English version Guide for procurement of power station equipment Part 6-3: Turbine auxiliaries Condenser plant Guide pour lacquisition de quipements destine s aux centrales de production de lectricite Partie 6-3: Auxiliaries de turbine Installat
11、ion de condensation Leitfaden fu r die Beschaffung von Ausru stungen fu r Kraftwerke Teil 6-3: Turbinenhilfseinrichtungen Kondensationsanlage This European Standard was approved by CEN/CENELEC on 11 December 1997. CEN/CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations whic
12、h stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN/CENELEC member. This Europ
13、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN/CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN/CENELEC membe
14、rs are the national standards bodies and national electrotechnical committees, respectively, of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 455
15、10-6-3:1998 BSI 1998 Foreword This standard takes the form of a recommendation and is therfore entitled a guide. This guide for procurement has been prepared by the CEN/CENELEC Joint Task Force Power Engineering (JTFPE) of which the secretariat is held by BSI. This European Standard shall be given t
16、he status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 1998, and conflicting national standards shall be withdrawn at the latest by July 1998. This guide for procurement has been prepared under mandates given to CEN and CENELEC by the Eu
17、ropean Commission and the European Free Trade Association. This guide for procurement is a part of a series of guides mandated to cover the procurement of power station plant and equipment in conformity with European Procurement Directives. The guides are: EN 45510 Guide for procurement of power sta
18、tion equipment Part 1: Common Clauses Part 2-1: Electrical equipment Power transformers Part 2-2: Electrical equipment Uninterruptible power supplies Part 2-3: Electrical equipment Stationary batteries and chargers Part 2-4: Electrical equipment High power static convertors Part 2-5: Electrical equi
19、pment Motors Part 2-6: Electrical equipment Generators Part 2-7: Electrical equipment Switchgear and control gear Part 2-8: Electrical equipment Power cables Part 2-9: Electrical equipment Cabling systems Part 3-1: Boilers Water tube boilers Part 3-2: Boilers Shell boilers Part 3-3: Boilers Boilers
20、with fluidized bed firing Part 4-1: Boiler auxiliaries Equipment for reduction of dust emissions Part 4-2: Boiler auxiliaries Gas-air, steam-air and gas-gas heaters Part 4-3: Boiler auxiliaries Draught plant Part 4-4: Boiler auxiliaries Fuel preparation equipment Part 4-5: Boiler auxiliaries Coal ha
21、ndling and bulk storage plant Part 4-6: Boiler auxiliaries Flue gas desulfurization (De-SO x ) plant Part 4-7: Boiler auxiliaries Ash handling plant Part 4-8: Boiler auxiliaries Dust handling plant Part 4-9: Boiler auxiliaries Sootblowers Part 4-10: Boiler auxiliaries Flue gas denitrification (De-NO
22、 x ) plant Part 5-1: Turbines Steam turbines Part 5-2: Turbines Gas turbines Part 5-3: Turbines Wind turbines Part 5-4: Turbines Hydraulic turbines, storage pumps and pump-turbines Part 6-1: Turbine auxiliaries Deaerators Part 6-2: Turbine auxiliaries Feedwater heaters Part 6-3: Turbine auxiliaries
23、Condenser plant Part 6-4: Turbine auxiliaries Pumps Part 6-5: Turbine auxiliaries Dry cooling systems Part 6-6: Turbine auxiliaries Wet and wet/dry cooling towers Part 6-7: Turbine auxiliaries Moisture separator reheaters Part 6-8: Turbine auxiliaries Cranes Part 6-9: Turbine auxiliaries Cooling wat
24、er systems Part 7-1: Pipework and valves High pressure piping systems Part 7-2: Pipework and valves Boiler and high pressure piping valves Part 8-1: Control and instrumentation EN 45510 Part 1 contains those clauses common to all the above guides giving the provisions of a non equipment specific nat
25、ure for use in the procurement of power station plant. EN 45510 is the responsibility of JTFPE. The so called “common clauses”, as appropriate, also appear in italics in the documents specific to particular equipment. Where paragraphs of “common clauses” are omitted, each paragraph omitted is indica
26、ted by the symbol *. In this guide, words in bold type indicate that they have the meaning given in the definitions, clause 3. In this guide, words and sentences not in italics are specific to this guide and refer to the particular equipment covered. According to the CEN/CENELEC Internal Regulations
27、, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
28、Kingdom.Page 3 EN 45510-6-3:1998 BSI 1998 Contents Page Foreword 2 1 Scope 4 2 Normative references 4 3 Definitions 4 3.1 Organizational terms 4 3.2 Technical terms 5 3.3 General terms 6 4 Brief overall project description 7 4.1 Role and organization of purchaser 7 4.2 Site location 7 4.3 Equipment
29、task 7 4.4 Equipment to be purchased 7 4.5 Control and instrumentation 7 4.6 Electrical supplies and other services 7 4.7 Other interfaces 8 4.8 Project programme 8 4.9 Equipment identification systems 8 5 Extent of supply 8 6 Terminal points 9 7 Operational requirements 9 7.1 Operating environment
30、9 7.2 Manning levels 9 7.3 Normal operation 9 7.4 Operating hours 9 7.5 Start-up and shut-down 9 7.6 Abnormal conditions 9 7.7 Further operational requirements 9 8 Life expectancy 10 8.1 Design life 10 8.2 Components requiring periodic maintenance 10 9 Performance requirements 10 9.1 Duty 10 9.2 Per
31、formance 11 9.3 Equipment margins 11 9.4 Availability 11 9.5 Levels of component redundancy 11 9.6 Further performance requirements 11 10 Design and fabrication 11 10.1 Specific equipment features 11 10.2 Design justification 12 10.3 Material selection 12 Page 10.4 Safety 12 10.5 Interchangeability
32、12 10.6 Fabrication methods 12 11 Maintenance requirements 13 11.1 Planned maintenance 13 11.2 Personnel safety 13 11.3 Requirements for access 13 11.4 Lifting requirements 13 11.5 Special tools 13 11.6 Test equipment 13 11.7 Spare parts strategy 13 11.8 Special precautions 13 12 Technical documenta
33、tion requirements 13 12.1 Tender documentation 13 12.2 Contract documentation 13 13 Applicable legislation, regulations, standards and further requirements 14 13.1 Legislation and regulations 14 13.2 Standards 14 13.3 Further requirements 14 14 Evaluation criteria 14 14.1 General 14 14.2 Technical c
34、riteria 14 15 Quality measures 14 15.1 General 14 15.2 Approvals procedure 15 15.3 Inspection requirements 15 15.4 Non-conformity 15 16 Site factors 15 16.1 Access 15 16.2 Facilities 15 16.3 Site specific requirements 15 17 Verification of specified performance 15 17.1 General 15 17.2 Works tests 15
35、 17.3 Test during installation and commissioning 16 17.4 Technical conditions for trial run 16 17.5 Functional and performance tests 16 Annex A (informative) Bibliography 17Page 4 EN 45510-6-3:1998 BSI 1998 1 Scope This standard gives guidance on writing the technical specification for the procureme
36、nt of condenser plants for use in electricity generating stations (power stations). This guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation
37、 of this guide. This guide covers: water cooled surface and direct contact condensers acting as a steam sink for main or auxiliary turbines in power stations (parts in brackets marked with * apply to direct contact condensers only); condenser auxiliary equipment. Air blast or air-cooled type condens
38、ers (ACCs) are not covered by this guide. The equipment covered by this guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This gu
39、ide indicates to potential purchasers how their specification should be prepared so that: the equipment type and capacity interfaces correctly with other elements of the systems such as the turbine, cooling water system, regenerating feed heating system, district heating and steam generating plant;
40、predicted performance is achieved; ancillary equipment is properly sized; reliability, availability and safety requirements are achieved; proper consideration is given to the evaluation process and the quality measures to be applied. This guide does not determine the type of specification (e.g. deta
41、iled, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchasers project strategy. It does not cover: any commercial, contractual or legal issues which are normally in separate parts of an enquiry; any allocation of responsibiliti
42、es which are determined by the contract. This guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this guide does not address the environmental implications of the equipment. 2 Normative reference
43、s This guide for procurement incorporates by dated or undated reference, provisions from other publications. These normative references are cited in the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of the
44、se publications apply to this guide only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. EN ISO 9001, Quality systems Model for quality assurance in design, development, production, installation and servicing (ISO 9
45、001:1994) EN ISO 9002, Quality systems Model for quality assurance in production, installation and servicing (ISO 9002:1994) IEC 50 (191), International electrotechnical vocabulary Chapter 191: Dependability and quality of service 3 Definitions For the purposes of this guide, the following definitio
46、ns apply. 3.1 organizational terms 3.1.1 purchaser recipient of a product and/or a service provided by a supplier 3.1.2 supplier person or organization that provides a product and/or a service to the purchaser 3.1.3 specification document stating technical requirements of the purchaser. It may form
47、part of an enquiry issued by a purchaser 3.1.4 enquiry invitation to tender issued by a purchaser. It will normally include a specification together with the necessary contractual and commercial conditions 3.1.5 tender offer made by a tenderer in response to an enquiry 3.1.6 tenderer person or organ
48、ization submitting a tender for the equipment in response to the enquiryPage 5 EN 45510-6-3:1998 BSI 1998 3.1.7 site place to which the equipment is to be delivered or where work is to be done by the supplier, together with so much of the area surrounding as the supplier may, with the consent of the
49、 purchaser, use for the purposes of the contract NOTE Further definitions of useful organisational terms may be found in EN ISO 8402 (see Annex A). 3.2 technical terms 3.2.1 condensers condensers act as the steam sink for main and/or auxiliary turbines. They can be water cooled surface or direct contact condensers. The condenser consists of the shell, tube bundles, condenser neck, internal support structure, hotwell, water boxes, (spra