1、BRITISH STANDARD BS EN 50289-1-4:2001 Communication cables Specifications for test methods Part 1-4: Electrical test methods Insulation resistance The European Standard EN 50289-1-4:2001 has the status of a British Standard ICS 33.120.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYR
2、IGHT LAWBS EN 50289-1-4:2001 This British Standard, having been prepared under the direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 2001 BSI 08-2001 ISBN 0 580 38229 X National foreword This British
3、 Standard is the official English language version of EN 50289-1-4:2001. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wire and waveguides, RF connectors, and accessories for communication and signalling, to Subcommittee EPL/46/1, Communication cables,
4、which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogu
5、e under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their corr
6、ect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor
7、 related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the
8、document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 50289-1-4 NORME EUROPENNE EUROPISCHE NORM June 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrot
9、echnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50289-1-4:2001 E ICS 33.120.20 English version Communication cables - Specifications for test method
10、s Part 1-4: Electrical test methods - Insulation resistance Cbles de communication - Spcifications des mthodes dessai Partie 1-4: Mthodes dessais lectriques - Rsistance disolement Kommunikationskabel - Spezifikationen fr Prfverfahren Teil 1-4: Elektrische Prfverfahren - Isolationswiderstand This Eur
11、opean Standard was approved by CENELEC on 2001-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
12、es concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC memb
13、er into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands
14、, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 50289-1-4:2001 2 Foreword This European Standard was prepared by SC 46XC, Multicore, Multipair and Quad Data communication cables, of Technical Committee CENELEC TC 46X, Communication cables. The text of the draft was submitted to
15、the formal vote and was approved by CENELEC as EN 50289-1-4 on 2001-03-01. The following dates were fixed: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-04-01 - latest date by which the national sta
16、ndards conflicting with the EN have to be withdrawn (dow) 2004-04-01 This European Standard has been prepared under the European Mandate M/212 given to CENELEC by the European Commission and the European Free Trade Association. _ 3 EN 50289-1-4:2001 Contents Foreword 1 1 Scope 4 2 Normative referenc
17、es 4 3 Definitions . 4 4 Test method. 5 4.1 Equipment 5 4.2 Test sample 5 4.3 Procedure.5 4.3.1 Core test 5 4.3.2 Group test 5 4.3.3 Coaxial cables 5 5 Expression of test results 6 6 Test report . 6EN 50289-1-4:2001 4 1 Scope Part 1-4 of EN 50289 details the test methods to determine the insulation
18、resistance of the finished cables used in analogue and digital communication systems. It is to be read in conjunction with Part 1-1 of EN 50289, which contains essential provisions for its application. 2 Normative references This European Standard incorporates by dated or undated reference, provisio
19、ns from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by a
20、mendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 50289-1-1 2001 Communication cables Specifications for tests methods - Part 1-1: Electrical test methods General requirements EN 50290-1-2 1) - Communication cables - Par
21、t 1-2: Definitions 3 Definitions For the purposes of this European Standard, the definitions given in EN 50290-1-2 apply in addition to the following ones. 3.1 group test the group test for multi-element cables (if applicable) is the test between two specified groups of conductors each of which has
22、all its conductors connected together : A D B C A B Figure 1 Starquads Figure 2 Pairs1)At draft stage 5 EN 50289-1-4:2001 Table 1 Pairs Starquads Group I Wires A Wires A,C Group II Wires B Wires B,D 4 Test method 4.1 Equipment The test equipment shall have a suitable minimum range - typically 2 x 10
23、 5M and shall provide the voltage as specified in the relevant specification. 4.2 Test sample In general the test is performed on a delivery length. Both ends of the cable under test (CUT) shall be prepared such that, when the specified voltage is applied to the conductor/screen under test, there sh
24、all be no breakdown or significant partial discharges at the terminations. 4.3 Procedure The test shall be carried out on the CUT after continuity or the conductor resistance test. The measurement shall be carried out on complete lengths of the finished cable at a temperature specified in the releva
25、nt cable standard. The insulation resistance shall be measured as a core test or a group test. The test shall be performed by applying a DC voltage between 80 V and 500 V for a minimum duration of one minute unless otherwise specified in the relevant cable specification. 4.3.1 Core test The core tes
26、t is carried out by application of the test voltage between each conductor and all others plus the screen (if any) connected to earth. 4.3.2 Group test The group test (if applicable) is carried out by application of the test voltage between each group and all other groups plus screen (if any) earthe
27、d. 4.3.3 Coaxial cables The CUT shall be connected to the test equipment as follows : Inner conductor against outer conductor, outer conductor earthed except for armoured cables.EN 50289-1-4:2001 6 5 Expression of test results The test results shall be normalized to the reference length of 1 km. L R
28、m Ri = 000 1 (M km) (1) where Ri = insulation resistance of reference length Rm = measured resistance, in M , of CUT L=length of sample in m 6 Test report The test report shall include: temperature, sample length, test voltage, duration, the insulation resistance for the reference length derived fro
29、m the measured value.blankBS EN 50289-1-4:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporate
30、d by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone fin
31、ding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS whi
32、ch ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI websit
33、e at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and in
34、ternational standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BS
35、I are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at
36、http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval sy
37、stem or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If
38、these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.
