1、Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSIBRITISH STANDARD BS EN 60335-2-86: 2003 Household and similar electrical appliances Safety Part 2-86: Particular requirements for electric fishing machines The European Standard EN 6
2、0335-2-86:2003 has the status of a British Standard ICS 65.150 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSIBS EN 60335-2-86:2003 This British Standard was published under the authority of the Standards Policy and Strategy Comm
3、ittee on 26 September 2003 BSI 26 September 2003 ISBN 0 580 42620 3 National foreword This British Standard is the official English language version of EN 60335-2-86:2003. It was derived by CENELEC from IEC 60335-2-86:2002. It supersedes BS EN 60335-2-86:2001 which will be withdrawn on 2007-08-01. T
4、he CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by . The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/8, Farm equipment, whi
5、ch has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the s
6、ection entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application
7、. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor
8、related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 19 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last is
9、sued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 60335-2-86 NORME EUROPENNE EUROPISCHE NORM August 2003 CENELEC European Committee for Electrotec
10、hnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. E
11、N 60335-2-86:2003 E ICS 65.150 Supersedes EN 60335-2-86:2000English version Household and similar electrical appliances Safety Part 2-86: Particular requirements for electric fishing machines (IEC 60335-2-86:2002, modified) Appareils lectrodomestiques et analogues Scurit Partie 2-86: Rgles particuli
12、res pour les quipements lectriques de pche (CEI 60335-2-86:2002, modifie) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-86: Besondere Anforderungen fr elektrische Fischereigerte (IEC 60335-2-86:2002, modifiziert) This European Standard was approved by CENELEC on 2003-03
13、-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obta
14、ined on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Cent
15、ral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Sl
16、ovakia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSI-53306 NE-23002:68 - - 2 Foreword The text of document 61H/165/FDIS, future second edition of IEC 60335-2-86, prepared by SC 61
17、H of the IEC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote. As a result of the Kista meeting of CENELEC TC 61 in May 2002, a draft amendment prAA containing the relevant existing common modifications was submitted to the formal vote. The texts of the FDIS and the prAA were a
18、pproved by CENELEC as a new edition of EN 60335-2-86 on 2003-03-01. This European Standard replaces EN 60335-2-86:2000. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2
19、004-03-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2007-08-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition o
20、f that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it in
21、to the European Standard: Safety requirements for electric fishing machines. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to
22、 be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
23、replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic ty
24、pe; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in A
25、nnex ZA to EN 60335-1. National deviations from this European Standard are listed in Annex ZB and are in addition to those in EN 60335-1. _ Page2 EN60335286:2003 Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSI Introduction An inv
26、estigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risk
27、s are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the I
28、nternational Standard IEC 60335-2-86:2002 was approved by CENELEC as a European Standard with agreed common modifications. Page3 EN60335286:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSI CONTENTS INTRODUCTION.5 1 Scope.6 2 N
29、ormative references .6 3 Definitions 6 4 General requirement.8 5 General conditions for the tests 8 6 Classification8 7 Marking and instructions.8 8 Protection against access to live parts10 9 Starting of motor-operated appliances 10 10 Power input and current .10 11 Heating 10 12 Void .11 13 Leakag
30、e current and electric strength at operating temperature11 14 Transient overvoltages .12 15 Moisture resistance 12 16 Leakage current and electric strength.12 17 Overload protection of transformers and associated circuits .12 18 Endurance12 19 Abnormal operation 12 20 Stability and mechanical hazard
31、s .13 21 Mechanical strength .13 22 Construction.13 23 Internal wiring.15 24 Components .15 25 Supply connection and external flexible cords 15 26 Terminals for external conductors.16 27 Provision for earthing .17 28 Screws and connections.18 29 Clearances, creepage distances and solid insulation18
32、30 Resistance to heat, and fire18 31 Resistance to rusting18 32 Radiation, toxicity and similar hazards18 Annexes .19 Annex ZB (informative) A-deviations 19 Annex ZC (informative) Normative references to international publications with their corresponding European publications A-deviations.19 Biblio
33、graphy19 Page4 EN60335286:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSI INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qual
34、ified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnorma
35、l situations that can be expected in practice. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within
36、 the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. This standard is a product fa
37、mily standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examine
38、d and tested, it is found to have other features which impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of t
39、he requirements and, if found to be substantially equivalent, may be considered to comply with the standard. Page5 EN60335286:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSI HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY
40、Part 2-86: Particular requirements for electric fishing machines 1 Scope This clause of Part 1 is replaced by the following. This standard deals with the safety of electric fishing machines by means of which water may be electrified for the purpose of catching fish or for providing barriers to all a
41、nimals living in water. The rated voltage of portable electric fishing machines is not more than 250 V and the rated voltage of fixed electric fishing machines for permanent connection to fixed wiring is not more than 1 000 V. NOTE 101 Examples of electric fishing machines coming within the scope of
42、 this standard are: mains-operated electric fishing machines which include those supplied from portable or stationary generator sets; battery-operated electric fishing machines. NOTE 102 Attention is drawn to the fact that for appliances intended to be used on board ships or boats, additional requir
43、ements may be necessary; in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. in some countries the use of portable electric fishi
44、ng machines for catching fish is only allowed for research purposes. NOTE 103 This standard does not apply to electric fence energizers (IEC 60335-2-76); electric animal stunning equipment (IEC 60335-2-87). 2 Normative references This clause of Part 1 is applicable except as follows. Addition: IEC 6
45、0068-2-52:1996, Environmental testing Part 2: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) IEC 61558-2-4:1997, Safety of power transformers, power supply units and similar Part 2: Particular requirements for isolating transformers for general use 3 Definitions This clause of Part 1 is
46、 applicable except as follows. Page6 EN60335286:2003Licensed Copy: Wang Bin, ISO/Exchange China Standards Information Centre, 08 December 2003, Uncontrolled Copy, (c) BSI 3.1.9 Replacement: normal operation operation of the appliance under the following conditions. The electric fishing machine is op
47、erated as in normal use when connected to the supply with an adjustable non-inductive resistor connected between its output terminals. The resistor is adjusted so as to give an output current just sufficient not to cause any protective device to operate 3.6.3 Addition: NOTE 101 It also includes term
48、inals for the connection of the battery and other metal parts in a battery compartment that become accessible when batteries are replaced, even with the aid of a tool. 3.6.4 Replacement: live part conductive part that may cause an electric shock 3.101 electric fishing machine appliance, comprising e
49、lectrodes and an energizer, that is designed or used for the control, taking, killing of any species of fish or invertebrate living in water or for the production of electronarcosis, by means of electric current NOTE 1 An electric fishing machine may be used to provide a barrier effective for all animals living in water. NOTE 2 A given electric fishing machine may only perform some of the functions specified. 3
