1、BRITISH STANDARD BS EN 60455-2:1999 IEC 60455-2: 1998 Resin based reactive compounds used for electrical insulation Part 2: Methods of test The European Standard EN 60455-2:1999 has the status of a British Standard ICS 29.035.20BSEN 60455-2:1999 This British Standard, having been prepared under the
2、directionof the Electrotechnical Sector Committee, was publishedunder the authorityofthe Standards Committee and comes into effect on 15 June 1999 BSI 04-2000 ISBN 0 580 32543 1 National foreword This British Standard is the English language version of EN60455-2:1999. Itis identical with IEC 60455-2
3、:1998. It supersedes BS5664-2.1:1979 which iswithdrawn. NOTEBS 5664-2.2:1988 Coating powders, (IEC 60455-2:1984) remains current at the date of this publication, although its future is being considered by the relevant IEC committee. The UK participation in its preparation was entrusted by Technical
4、Committee GEL/15, Insulating materials, to Subcommittee GEL/15/3, Material specifications, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK
5、interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. Fo
6、r instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an anne
7、x which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspo
8、ndence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not o
9、f itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 20 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be
10、 indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN 60455-2:1999 BSI 04-2000 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 60455-2 5ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60455-
11、2 April 1999 ICS 17.220.99; 29.035.01 Supersedes HD 307.2 S1:1986 English version Resin based reactive compounds used for electrical insulation Part 2: Methods of test (IEC 60455-2:1998) Composs ractifs base de rsines utiliss comme isolants lectriques Partie 2: Mthodes dessai (CEI 60455-2:1998) Reak
12、tionsharzmassen fr die Elektroisolierung Teil 2: Prfverfahren (IEC 60455-2:1998) This European Standard was approved by CENELEC on 1999-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of
13、a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A ver
14、sion in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, De
15、nmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrote
16、chnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60455-2:1999 EEN 60455-2:1999 BSI 04-2000 2 Foreword The text of document 15C/893 + 1000/FDIS, future edi
17、tion 2 of IEC60455-2, prepared by SC 15C, Specifications, of IEC TC15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN60455-2 on1999-04-01. This European Standard supersedes HD307.2 S1:1986. The following dates were fixed: Annexes designated “no
18、rmative” are part of the body of the standard. Annexes designated “informative” are given for information only. In this standard, Annex ZA is normative and Annex A is informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC60455-2:1998 was approv
19、ed by CENELEC as a European Standard without any modification. Contents Page Foreword 2 Introduction 5 1 Scope 5 2 Normative references 5 3 Definitions 7 4 General notes on methods of test 7 5 Methods of test for reactive compounds and their components 7 5.1 Flash point (1, 2 and 3) 7 5.2 Density (1
20、,2 and 3) 7 5.3 Viscosity (1, 2 and 3) 7 5.4 Shelf life (1, 2 and 3) 7 5.5 Softening temperature (1 and 2) 8 5.6 Ash content (1 and 2) 8 5.7 Filler content (1 and 2) 8 5.8 Chlorine content 8 5.8.1 Total chlorine content of unsaturated polyesters and epoxide resins (1 and 2) 8 5.8.2 Inorganic chlorin
21、e content of epoxide resins and glycidyl esters (1) 8 5.8.3 Easily saponifiable chlorine content of epoxide resins and related materials (1) 8 5.9 Epoxide equivalent of epoxide resins (1) 8 5.10 Water content (Karl Fischer method) (1 and 2) 8 5.11 Hydroxyl value 8 5.11.1 Polyester resins (1) 8 5.11.
22、2 Resins other than polyester (1) 8 5.12 Acid value of polyester resins (1) 8 5.13 Amount of double bonds of unsaturated polyester and acrylate resins (1) 8 5.14 Acid and acid-anhydride content of acid-anhydride hardeners (2) 8 5.15 Amine value (2) 8 5.16 Pot life (3) 8 5.17 Gel time 8 5.17.1 Unsatu
23、rated polyester based compounds (3) 8 5.17.2 Phenolic resin based compounds (3) 8 5.17.3 Other compounds (3) 8 5.18 Exothermic temperature rise 8 5.18.1 Unsaturated polyester based compounds (3) 8 latest date by which the ENhas to be implemented at national level by publication of an identical natio
24、nal standard or by endorsement (dop) 2000-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2002-01-01EN 60455-2:1999 BSI 04-2000 3 Page 5.18.2 Compounds other than unsaturated polyester based (3) 8 5.19 Total volume shrinkage of epoxide and unsatur
25、ated polyester based compounds (3) 9 6 Methods of test for cured reactive compounds 9 6.1 Test specimens 9 6.1.1 Preparation of the reactive compound 9 6.1.2 Preparation of test specimens 9 6.1.3 Type and number of test specimens 9 6.2 Density 9 6.3 Mechanical properties 9 6.3.1 Tensile properties 9
26、 6.3.2 Compressive properties 9 6.3.3 Flexural properties 10 6.3.4 Impact strength 10 6.3.5 Hardness 10 6.4 Thermal properties 10 6.4.1 Bond strength at elevated temperature 10 6.4.2 Linear thermal expansion 10 6.4.3 Thermal conductivity 10 6.4.4 Glass transition 10 6.4.5 Flammability 10 6.4.6 Therm
27、al shock 10 6.4.7 Temperature index 10 6.5 Chemical properties 11 6.5.1 Water absorption 11 6.5.2 Effect of liquid chemicals 11 6.5.3 Resistance to mould growth 11 6.5.4 Water vapour permeability 11 6.6 Electrical properties 11 6.6.1 Effect of water immersion on volume resistivity 11 6.6.2 Dielectri
28、c dissipation factor (tan ) and relative permittivity ( r ) 12 6.6.3 Breakdown voltage and electric strength 12 6.6.4 Proof tracking index (PTI) 13 6.6.5 Electrolytic corrosion 13 Annex A (informative) Bibliography 17 Annex ZA (normative) Normative references to international publications with their
29、 corresponding European publications 18 Figure 1 Test set-up for volume resistivity 14 Page Figure 2 Example of electrode arrangement for flexible cured compound 15 Figure 3 Example of electrode arrangement for rigid cured compound 164 blankEN 60455-2:1999 BSI 04-2000 5 Introduction This part of IEC
30、60455 is one of a series which deals with solvent-free resin based reactive compounds and their components used for electrical insulation. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60455-1) 1) ; Part 2: Methods of test (IEC 60455-2); Part 3: Specifications
31、 for individual materials (IEC 60455-3). 1 Scope This part of IEC60455 specifies methods of test to be used for testing resin based reactive compounds, their components and cured compounds used for electrical insulation. 2 Normative references The following normative documents contain provisions whi
32、ch, through reference in this text, constitute provisions of this part of IEC60455. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of IEC60455 are encouraged to investigate the possibility of
33、applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. IEC 60050(212):1990, International Electrotech
34、nical Vocabulary (IEV) Chapter 212: Insulating solids, liquids and gases. IEC 60068-2-10:1988, Environmental testing Part 2: Tests. Test J and guidance: Mould growth. IEC 60093:1980, Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials. IEC 60112:19
35、79, Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions. IEC 60216-1:1990, Guide for the determination of thermal endurance properties of electrical insulating materials Part 1: General guidelines for ageing procedures and evalua
36、tion of test results. IEC 60216-2:1990, Guide for the determination of thermal endurance properties of electrical insulating materials Part 2: Choice of test criteria. IEC 60216-3-1:1990, Guide for the determination of thermal endurance properties of electrical insulating materials Part 3: Instructi
37、ons for calculating thermal endurance characteristics Section 1: Calculations using mean values of normally distributed complete data. IEC 60216-3-2:1993, Guide for the determination of thermal endurance properties of electrical insulating materials Part 3: Instructions for calculating thermal endur
38、ance characteristics Section 2: Calculations for incomplete data: proof test results up to and including the median time to end-point (equal test groups). IEC/TR 60216-4-1:1990, Guide for the determination of thermal endurance properties of electrical insulating materials Part 4: Ageing ovens Sectio
39、n 1: Single-chamber ovens. IEC 60216-5:1998, Guide for the determination of thermal endurance properties of electrical insulating materials Part 5: Guidelines for application of thermal endurance characteristics. IEC 60243-1:1998, Electric strength of insulating materials Test methods Part 1: Tests
40、at power frequencies. IEC 60250:1969, Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths. IEC 60296:1982, Specification for unused mineral insulating oils
41、 for transformers and switchgear. IEC 60426:1973, Test methods for determining electrolytic corrosion with insulating materials. IEC 60455-1:1998, Resin based reactive compounds used for electrical insulation Part 1: Definitions and general requirements. IEC 60455-3 (all parts), Specification for so
42、lventless polymerisable resinous compounds used for electrical insulation Part 3: Specifications for individual materials. IEC 60707:1981, Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source. IEC 60814:1997, Insulating
43、 liquids Oil-impregnated paper and pressboard Determination of water by automatic coulometric Karl Fischer titration. IEC 61006:1991, Methods of test for the determination of the glass transition temperature of electrical insulating materials. 1) To be published.EN 60455-2:1999 6 BSI 04-2000 IEC 610
44、33:1991, Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate. IEC 61099:1992, Specifications for unused synthetic organic esters for electrical purposes. ISO 37:1994, Rubber, vulcanized or thermoplastic Determination of tensile stress-strain prop
45、erties. ISO 62:1980, Plastics Determination of water absorption 2) . ISO 75 (all parts), Plastics and ebonite Determination of temperature of deflection under load. ISO 175:1981, Plastics Determination of the effects of liquid chemicals, including water. ISO 178:1993, Plastics Determination of flexu
46、ral properties. ISO 179:1993, Plastics Determination of Charpy impact strength 2) . ISO 306:1994, Plastics Thermoplastic materials Determination of Vicat softening temperature (VST). ISO 527 (all parts), Plastics Determination of tensile properties. ISO 584:1982, Plastics Unsaturated polyester resin
47、s Determination of reactivity at 80 degrees C (conventional method). ISO 604:1993, Plastics Determination of compressive properties. ISO 868:1985, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness). ISO 1183:1987, Plastics Methods for determining the
48、density and relative density of non-cellular plastics. ISO 1512:1991, Paints and varnishes Sampling of products in liquid or paste form. ISO 1513:1992, Paints and varnishes Examination and preparation of samples for testing. ISO 1523:1983, Paints, varnishes, petroleum and related products Determinat
49、ion of flashpoint Closed cup equilibrium method. ISO 1675:1985, Plastics Liquid resins Determination of density by the pyknometer method. ISO 2039-1:1993, Plastics Determination of hardness Part 1: Ball indentation method. ISO 2114:1996, Plastics Unsaturated polyester resins Determination of partial acid value and total acid value. ISO 2431:1993, Paints and varnishes Determination of flow time by use of flow cups. ISO 2535:1997, Plastics Unsaturated po
