BS EN 60534-3-2-2001 Industrial-process control valves Dimensions Face-to-face dimensions for rotary control valves except butterfly valves《工业过程控制阀 尺寸规格 蝶形阀除外的转式控制阀端面距》.pdf

上传人:eveningprove235 文档编号:575890 上传时间:2018-12-13 格式:PDF 页数:12 大小:232.16KB
下载 相关 举报
BS EN 60534-3-2-2001 Industrial-process control valves Dimensions Face-to-face dimensions for rotary control valves except butterfly valves《工业过程控制阀 尺寸规格 蝶形阀除外的转式控制阀端面距》.pdf_第1页
第1页 / 共12页
BS EN 60534-3-2-2001 Industrial-process control valves Dimensions Face-to-face dimensions for rotary control valves except butterfly valves《工业过程控制阀 尺寸规格 蝶形阀除外的转式控制阀端面距》.pdf_第2页
第2页 / 共12页
BS EN 60534-3-2-2001 Industrial-process control valves Dimensions Face-to-face dimensions for rotary control valves except butterfly valves《工业过程控制阀 尺寸规格 蝶形阀除外的转式控制阀端面距》.pdf_第3页
第3页 / 共12页
BS EN 60534-3-2-2001 Industrial-process control valves Dimensions Face-to-face dimensions for rotary control valves except butterfly valves《工业过程控制阀 尺寸规格 蝶形阀除外的转式控制阀端面距》.pdf_第4页
第4页 / 共12页
BS EN 60534-3-2-2001 Industrial-process control valves Dimensions Face-to-face dimensions for rotary control valves except butterfly valves《工业过程控制阀 尺寸规格 蝶形阀除外的转式控制阀端面距》.pdf_第5页
第5页 / 共12页
亲,该文档总共12页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BRITISH STANDARD BS EN 60534-3-2:2001 IEC 60534-3-2:2001 Industrial-process control valves Part 3-2: Dimensions Face-to-face dimensions for rotary control valves except butterfly valves The European Standard EN 60534-2-3:2001 has the status of a British Standard ICS 23.060.01; 25.040.40 NO COPYING W

2、ITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 60534-3-2:2001 This British Standard, having been prepared under the direction of the Electrotechnical Strategy and Policy Committee, was published under the authority of the Standards Policy and Strategy Committee on 28 September 2001

3、BSI 28 September 2001 ISBN 0 580 38533 7 National foreword This British Standard is the official English language version of EN 60534-3-2:2001. It is identical with IEC 60534-3-2:2001. It supersedes BS 5793-3-2:1985 which will be withdrawn on 2004-06-01. The UK participation in its preparation was e

4、ntrusted by Technical Committee GEL/65, Measurement and control, to Subcommittee GEL/65/2, Elements of systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the numbe

5、r 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international

6、 or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all

7、the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enqu

8、iries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, the EN foreword page, the

9、 ISO title page, a blank page, pages 1 to 5 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60534-3-2 NORME EUROPENNE EUROPISCHE NORM July 2001 CENELEC Euro

10、pean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide fo

11、r CENELEC members. Ref. No. EN 60534-3-2:2001 E ICS 23.060.40; 25.040.40 English version Industrial-process control valves Part 3-2: Dimensions Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001) Vannes de rgulation des processus industriels Partie 3-2: Dim

12、ensions Dimensions face-face des vannes de rgulation rotatives except les vannes papillon (CEI 60534-3-2:2001) Stellventile fr die Prozessregelung Teil 3-2: Mae Einbaulngen von drehenden Stellventilen mit Ausnahme von Klappen (IEC 60534-3-2:2001) This European Standard was approved by CENELEC on 200

13、1-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

14、obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the

15、Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerlan

16、d and United Kingdom.EN 60534-3-2:2001 - 2 - Foreword The text of document 65B/431/FDIS, future edition 2 of IEC 60534-3-2:2001, prepared by SC 65B, Devices, of IEC TC 65, Industrial-process measurement and control, was submitted to the IEC- CENELEC parallel vote and was approved by CENELEC as EN 60

17、534-3-2 on 2001-06-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow

18、) 2004-06-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60534-3-2:2001 was approved by CENELEC as a European Standard without any mod

19、ification. _ Page2 EN6053432:2001 NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 60534-3-2 Deuxime dition Second edition 2001-04 Vannes de rgulation des processus industriels Partie 3-2: Dimensions Dimensions face-face des vannes de rgulation rotatives except les vannes papillon Industrial-proc

20、ess control valves Part 3-2: Dimensions Face-to-face dimensions for rotary control valves except butterfly valves Numro de rfrence Reference number CEI/IEC 60534-3-2:2001blank60534-3-2 IEC:2001 5 INDUSTRIAL-PROCESS CONTROL VALVES Part 3-2: Dimensions Face-to-face dimensions for rotary control valves

21、 except butterfly valves 1 Scope This part of IEC 60534 applies to the following control valves: types: segmented ball and eccentric rotary control valves with or without flanges; nominal sizes: DN20 up to and including DN400; NOTE 1 See ISO 7005 and ISO 6708. designations: PN10, PN16, PN20, PN25, P

22、N40, PN50, PN63, PN100 and PN110. NOTE 2 See ISO 7005 and ISO 7268. NOTE 3 Designations PN63 and PN100 are not included in ISO 7005. NOTE 4 Designations PN20, PN50 and PN110 are not included in European Standard EN 1092. NOTE 5 For the purposes of face-to-face dimensions, designation PN100 in EN 109

23、2 corresponds to PN110. NOTE 6 For the purposes of face-to-face dimensions, the following correlations apply: PN20 covers Classes 125 and 150 in the ANSI system; PN50 covers Classes 250 and 300 in the ANSI system; PN110 covers Class 600 in the ANSI system. Only raised face flanges are covered. Speci

24、fically excluded from this standard are all valves having welded or threaded end connections. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60534. For dated references, subsequent amendment

25、s to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of IEC 60534 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of t

26、he normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60534 (all parts), Industrial-process control valves ISO 6708, Pipework components Definition and selection of DN (nominal size) ISO 7005 (all parts), Metallic flanges

27、 ISO 7268, Pipe components Definition of nominal pressure EN 1092 (all parts), Flanges and their joints EN6053432:2001160534-3-2 IEC:2001 7 3 Definitions For the purposes of this part of IEC 60534, the definitions in the other parts of IEC 60534 apply with the addition of the following. 3.1 flangele

28、ss control valve control valve having no line flanges but intended to be installed by clamping between pipe flanges 4 Dimensions Dimensions given in table 1 are the overall lengths of the listed valves. See figure 1 for a pictorial explanation of dimensions. They do not include any allowances for ga

29、skets to seal the joints between the valve ends and the pipeline flanges. EN6053432:2001260534-3-2 IEC:2001 9 5 Tolerances Allowable tolerances on face-to-face dimensions are shown in table 1. L IEC 441/01 Flangeless control valve L IEC 442/01 Flanged control valve Figure 1 Face-to-face dimensions E

30、N6053432:2001360534-3-2 IEC:2001 11 Table 1 Face-to-face dimensions Nominal valve size DN Dimension L mm Tolerance for dimension L mm 20 25 40 50 80 100 150 200 250 300 350 400 76 102 114 124 165 194 229 243 297 338 400 400 2 2 2 2 2 2 2 2 2 3 3 3 EN6053432:20014- 3 - EN 60534-3-2:2001 Annex ZA (nor

31、mative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publicat

32、ions are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amend

33、ments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60534 Series Industrial process control valves EN 60534 Series ISO 6708 - 1) Pipework components - Definition and selection

34、of DN (nominal size) EN ISO 6708 1995 2) ISO 7005 Series Metallic flanges - - ISO 7268 - 1) Pipe components - Definition of nominal pressure - - - Flanges and their joints EN 1092 Series1) undated reference. 2) valid edition at date of issue. EN6053432:20015BS EN 60534-3-2:2001 IEC 60534-3-2:2001 BS

35、I 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards a

36、re updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this

37、British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive

38、 the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for in

39、ternational standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its

40、 Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments

41、 and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in a

42、ll BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means e

43、lectronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1