BS EN 60749-2-2002 Semiconductor devices - Mechanical and climatic test methods - Low air pressure《半导体装置 机械和气候试验方法 低气压》.pdf

上传人:王申宇 文档编号:576265 上传时间:2018-12-13 格式:PDF 页数:10 大小:297.27KB
下载 相关 举报
BS EN 60749-2-2002 Semiconductor devices - Mechanical and climatic test methods - Low air pressure《半导体装置 机械和气候试验方法 低气压》.pdf_第1页
第1页 / 共10页
BS EN 60749-2-2002 Semiconductor devices - Mechanical and climatic test methods - Low air pressure《半导体装置 机械和气候试验方法 低气压》.pdf_第2页
第2页 / 共10页
BS EN 60749-2-2002 Semiconductor devices - Mechanical and climatic test methods - Low air pressure《半导体装置 机械和气候试验方法 低气压》.pdf_第3页
第3页 / 共10页
BS EN 60749-2-2002 Semiconductor devices - Mechanical and climatic test methods - Low air pressure《半导体装置 机械和气候试验方法 低气压》.pdf_第4页
第4页 / 共10页
BS EN 60749-2-2002 Semiconductor devices - Mechanical and climatic test methods - Low air pressure《半导体装置 机械和气候试验方法 低气压》.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BRITISH STANDARD BS EN 60749-2:2002 Semiconductor devices Mechanical and climatic test methods Part 2: Low air pressure The European Standard EN 60749-2:2002 has the status of a British Standard ICS 31.080.01 BS EN 60749-2:2002 This British Standard, having been prepared under the direction of the E

2、lectrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 24 September 2002 BSI 24 September 2002 ISBN 0 580 40397 1 National foreword This British Standard is the official English language version of EN 60749-2:2002. It

3、 is identical with IEC 60749-2:2002. It partially supersedes BS EN 60749:1999. The UK participation in its preparation was entrusted to Technical Committee EPL/47, Semiconductors, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its

4、 secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic

5、Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to underst

6、and the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises

7、a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60749-2 NORME EUROPENNE EUROPISCHE NOR

8、M August 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any m

9、eans reserved worldwide for CENELEC members. Ref. No. EN 60749-2:2002 E ICS 31.080.01 Partly supersedes EN 60749:1999 + A1:2000 + A2:2001 English version Semiconductor devices - Mechanical and climatic test methods Part 2: Low air pressure (IEC 60749-2:2002) Dispositifs semiconducteurs - Mthodes des

10、sais mcaniques et climatiques Partie 2: Basse pression atmosphrique (CEI 60749-2:2002) Halbleiterbauelemente - Mechanische und klimatische Prfverfahren Teil 2: Niedriger Luftdruck (IEC 60749-2:2002) This European Standard was approved by CENELEC on 2002-07-02. CENELEC members are bound to comply wit

11、h the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretari

12、at or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the o

13、fficial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.E

14、N 64709-:20022 - 2 Foreword The text of document 47/1601/FDIS, future edition 1 of IEC 60749-2, prepared by IEC TC 47, Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60749-2 on 2002-07-02. This mechanical and climatic test method, as it relate

15、s to low air pressure, is a complete rewrite of the test contained in clause 3, chapter 3 of EN 60749:1999. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-04-01 latest d

16、ate by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-07-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Stand

17、ard IEC 60749-2:2002 was approved by CENELEC as a European Standard without any modification. _ Page2 EN607492:2002067-942 EI:C0022 3 INTRODUCTION The barometric-pressure test is performed under conditions simulating the low atmospheric pressure encountered in the non-pressurized portions of aircraf

18、t and other vehicles in high- altitude flight. Even when low pressures do not produce complete electrical breakdown, corona and its undesirable effects, including losses and ionization, are intensified. The simulated high-altitude conditions of this test can also be employed to investigate the influ

19、ence on component operating characteristics, of other effects of reduced pressure, including changes in dielectric constants of materials, and decreased ability of thinner air to transfer heat away from heat-producing components. Page3 EN607492:2002067-942 EI:C0022 4 SEMICONDUCTOR DEVICES MECHANICAL

20、 AND CLIMATIC TEST METHODS Part 2: Low air pressure 1 Scope This part of IEC 60749 covers the testing of low air pressure on semiconductor devices. The test is intended primarily to determine the ability of component parts and materials to avoid voltage breakdown failures due to the reduced dielectr

21、ic strength of air and other insulating materials at reduced pressures. This test is only applicable to devices where the operating voltage exceeds 1 000 V. This test is applicable to all semiconductor devices provided they are in cavity type packages. The test is intended for military and space-rel

22、ated applications only. In general, this test of low air pressure is in conformity with IEC 60068-2-13 but, due to specific requirements of semiconductors, the clauses of this standard apply. 2 Normative references The following referenced documents are indispensable for the application of this docu

23、ment. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-13, Environmental testing Part 2: Tests Test M: Low air pressure 3 Test apparatus The apparatus used for the barometric-pr

24、essure test shall consist of a vacuum pump and a suitable sealed chamber having means for visual observation of the specimen under test when necessary, a suitable pressure indicator to measure the simulated altitude in metres in the sealed chamber, and a microammeter or oscilloscope capable of detec

25、ting current over the range from d.c. to 30 MHz. 4 Procedure The specimens shall be mounted in the test chamber and the pressure reduced to the value indicated in one of the test conditions specified in table 1. While the specimens are maintained at the specified pressure, they shall be subjected to

26、 the appropriate tests. During this test and for a period of 20 min before, the test temperature shall be 25 C 10 C. The device shall have the specified voltage applied and shall be monitored over the range from atmospheric pressure to the specified minimum pressure and return for any device malfunc

27、tions. Page4 EN607492:2002067-942 EI:C0022 5 Table 1 Test conditions of air pressure corresponding to altitude Test condition Maximum pressure Pa Altitude m A 59 000 4 500 B 30 000 9 000 C 12 000 15 000 D 4 400 21 000 E 1 000 30 000 F 150 45 000 G 3,2 10 4 200 000 4.1 Test measurement The device sha

28、ll be connected for measurement and have the specified voltages applied during the entire pump-down cycle. The terminals to which the maximum voltage (see 5c) is applied shall be monitored with a microammeter or oscilloscope for corona currents in the range from d.c. to 30 MHz. Provision shall be ma

29、de for calibrating the current flow in the test circuit minus the device under the applicable test condition to ensure that test readings are characteristic of the device under test. 4.2 Post-exposure treatment At the end of the test period, the specimen shall be removed from the test chamber and ma

30、intained under standard atmospheric conditions for between 2 h and 24 h. Where ice or water particles adhere to the specimen, they shall be removed beforehand. 4.3 Failure criteria A device shall be defined as a failure if parametric limits are exceeded or if functionality cannot be demonstrated und

31、er the conditions specified in the relevant specification. A device which exhibits arc-overs, harmful coronas, or any other defect or deterioration which may interfere with the operation of the device, shall be considered a failure. Page5 EN607492:2002067-942 EI:C0022 6 5 Summary The following detai

32、ls shall be specified in the applicable procurement document. a) Method of mounting (see clause 4). b) Test condition (see clause 4). Unless otherwise specified, condition E shall be used. c) Tests during exposure to reduced pressure (see clause 4). Unless otherwise specified, the device shall be su

33、bjected to the maximum voltage it would be subjected to under rated operating conditions. d) Post-exposure treatment time period (see clause 4). e) Final measurements, if applicable (see clause 4). Unless otherwise specified, the device shall be subjected to full electrical tests of specified device

34、 characteristics or parameters. f) Sample size. _ Page6 EN607492:2002- 3 E N64709-:20022 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other pub

35、lications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revis

36、ion. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-13 1983 Enviro

37、nmental testing Part 2: Tests - Test M: Low air pressure EN 60068-2-13 1999 Page7 EN607492:2002BS EN 60749-2:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on st

38、andards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quali

39、ty of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)

40、20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44

41、(0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless other

42、wise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products a

43、nd services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits c

44、ontact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www

45、.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or t

46、ransmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1