1、BRITISH STANDARD BS EN 60819- 3-2:2002 IEC 60819-3- 2:2001 Non-cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 2: Hybrid inorganic-organic paper The European Standard EN 60819-3-2:2001 has the status of a British Standard ICS 29.035.10 NO COPYING WITHO
2、UT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 60819-3-2:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 18 January 2002
3、 BSI 18 January 2002 ISBN 0 580 38854 9 National foreword This British Standard is the official English language version of EN 60819-3-2:2001. It is identical with IEC 60819-3-2:2001. The UK participation in its preparation was entrusted by Technical Committee GEL/15, Insulating materials, to Subcom
4、mittee GEL/15/3/10, Flexible composites and textiles, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1
5、 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document
6、may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of Britis
7、h Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals
8、 for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyr
9、ight date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60819-3-2 NORME EUROPENNE EUROPISCHE NORM September 2001 CENELEC European Committee for Electrotechnical Standardization Comit Europen de N
10、ormalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60819-3-2:2001 E ICS 29.035.10 English
11、version Non-cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 2: Hybrid inorganic-organic paper (IEC 60819-3-2:2001) Papiers non cellulosiques usages lectriques Partie 3: Spcifications pour matriaux particuliers Feuille 2: Papier hybride inorganique-orga
12、nique (CEI 60819-3-2:2001) Vliesstoffe auf Kunststofffaserbasis fr elektrotechnische Zwecke Teil 3: Bestimmungen fr einzelne Materialien Blatt 2: Anorganische-organische Hybrid-Papiere (IEC 60819-3-2:2001) This European Standard was approved by CENELEC on 2001-09-01. CENELEC members are bound to com
13、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Se
14、cretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status a
15、s the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 60819-3-2:2001 -
16、2 - Foreword The text of document 15C/1206/FDIS, future edition 1 of IEC 60819-3-2, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60819-3-2 on 2001-09-01. The following dates were fixed: latest
17、 date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-09-01 Annexes designated “normative“ are part of the b
18、ody of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60819-3-2:2001 was approved by CENELEC as a European Standard without any modification. _ Page2 EN6081932:2001 BSI17January200260819-3-2 I
19、EC:2001 3 INTRODUCTION This part of IEC 60819 is one of a series which deals with non-cellulosic papers for electrical purposes. The series consists of three parts: Part 1: Definitions and general requirements (IEC 60819-1); Part 2: Methods of test (IEC 60819-2); Part 3: Specifications for individua
20、l materials (IEC 60819-3). This standard contains one of the sheets comprising part 3 as follows: Sheet 2: Hybrid inorganic-organic paper. Page3 EN6081932:2001 BSI17January200260819-3-2 IEC:2001 4 NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES Part 3: Specifications for individual materials Sheet 2:
21、Hybrid inorganic-organic paper 1 Scope This sheet of IEC 60819-3 specifies requirements for a single type of hybrid inorganic-organic filled paper made from polyethylene-terephthalate fibres filled with silicates of aluminium and designated P-H. 2 Normative references The following normative documen
22、ts contain provisions which, through reference in the text, constitute provisions of this part of IEC 60819. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of IEC 60819 are encouraged to inves
23、tigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. IEC 60819-1:1995, No
24、n-cellulosic papers for electrical purposes Part 1: Definitions and general requirements IEC 60819-2, Non-cellulosic papers for electrical purposes Part 2: Methods of test 1 3 Requirements In addition to complying with the general requirements in IEC 60819-1, papers shall comply with the specific re
25、quirements given in table 1 and in 3.1, 3.2, 3.3 and 3.4. 3.1 The average thickness of 10 measurements evenly distributed along a line at right angles to the machine direction of the paper shall be within 15 % of the nominal thickness. Thickness measurements shall be made in accordance with clause 4
26、 of IEC 60819-2. 3.2 Moisture content of the paper shall not exceed 0,8 % (see IEC 60819-2, clause 12). 3.3 Loss of mass on ignition at 625 C for 1 h (see IEC 60819-2, clause 13) shall not be greater than 65 %. _ 1To be published. Page4 EN6081932:2001 BSI17January200260819-3-2 IEC:2001 5 3.4 Thermal
27、 classification: based on long-term thermal ageing tests and the resulting Arrhenius graph, experience has shown that non-cellulosic papers listed in this sheet may be suitable for use in electrical apparatus and shall have a relative temperature index (RTI) up to 180 C. Table 1 Physical and electri
28、cal requirements Property Clause of IEC 60819-2 Units Nominal thickness mm Minimum Maximum Grammage 5 g/m 2 0,06 0,08 0,13 0,18 0,25 0,38 69 77 115 171 235 346 94 104 156 231 318 468 Electrical strength 10 kV 0,06 0,08 0,13 0,18 0,25 0,38 0,5 0,6 0,8 1,0 1,6 1,9 NR NR NR NR NR NR Tensile strength 7
29、N/10 mm 0,06 0,08 0,13 0,18 0,25 0,38 21 25 44 53 84 105 NR NR NR NR NR NR Elongation at break 7 % 0,06 0,08 0,13 0,18 0,25 0,38 7 7 11 13 13 13 NR NR NR NR NR NR NOTE NR: no requirement. _ Page5 EN6081932:2001 BSI17January2002- 3 - EN 91806-3-2:1002 Annex ZA (normative) Normative references to inte
30、rnational publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated
31、 references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international p
32、ublication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60819-1 1995 Non-cellulosic papers for electrical purposes Part 1: Definitions and general requirements EN 60819-1 1995 IEC 60819-2 2001 Part 2: Methods of test
33、 EN 60819-2 2001 Page6 EN6081932:2001 BSI17January2002BS EN 60819- 3-2:2002 IEC 60819-3- 2:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe
34、and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products
35、 and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI
36、offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. F
37、ax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. In
38、formation on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Conta
39、ct the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership
40、Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright C
41、opyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any
42、form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
