1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationConnectors for electronic equipment Product requirementsPart 2-001: Circular connectors Blank detail specificationBS EN 61076-2-001:2011National forewordThis British Standard is
2、the UK implementation of EN 61076-2-001:2011. It isidentical to IEC 61076-2-001:2011. It supersedes BS EN 61076-2-001:2002which is withdrawn.The UK participation in its preparation was entrusted to Technical CommitteeEPL/48, Electromechanical components and mechanical structures for electronic equip
3、ment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 67058 9ICS 31.220.10Compliance with
4、a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 August 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61076-2-001:2011EUROPEAN STANDAR
5、D EN 61076-2-001 NORME EUROPENNE EUROPISCHE NORM August 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All righ
6、ts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61076-2-001:2011 E ICS 31.220.10 Supersedes EN 61076-2-001:2001English version Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
7、 (IEC 61076-2-001:2011) Connecteurs pour quipements lectroniques - Exigences de produit - Partie 2-001: Connecteurs circulaires - Spcification particulire cadre (CEI 61076-2-001:2011) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 2-001: Rundsteckverbinder - Vordruck fr
8、Bauartspezifikation (IEC 61076-2-001:2011) This European Standard was approved by CENELEC on 2011-07-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any altera
9、tion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tra
10、nslation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark,
11、Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61076-2-001:2011EN 61076-2-001:2011 - 2 - Foreword The t
12、ext of document 48B/2241/FDIS, future edition 2 of IEC 61076-2-001, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61076-2-001 on 2011-07-2
13、6. This European Standard supersedes EN 61076-2-001:2001. EN 61076-2-001:2011 includes the following significant technical changes with respect to EN 61076-2-001:2001: a) This European Standard no longer includes the quality assessment procedures. As described in EN 61076-1 and EN 62197-1, a new doc
14、ument structure has been established. EN 61076-2-001 has been revised to reflect this updated structure. b) Subclause 3.2, Systems of levels has been introduced. c) The subclause IEC type designation has been removed. d) Clauses 4 Dimensional information and 5 Characteristics have been added. e) Som
15、e clauses and test groups have been rearranged. Test group HP has been added. EN 61076-2-001:2011 should be used in conjunction with EN 61076-1, EN 61076-2 and EN 62197-1. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CE
16、NELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-04-26 latest date by which the national
17、 standards conflicting with the EN have to be withdrawn (dow) 2014-07-26 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61076-2-001:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliogr
18、aphy, the following note has to be added for the standard indicated: IEC 60664-1 NOTE Harmonized as EN 60664-1. _ BS EN 61076-2-001:2011- 3 - EN 61076-2-001:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following refer
19、enced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common m
20、odifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 60352 Series Solderless connections EN 60352 Series IEC 60512 Series Connectors for electronic equipment - Tests and mea
21、surements EN 60512 Series IEC 60512-1 - Connectors for electronic equipment - Tests and measurements - Part 1: General EN 60512-1 - IEC 60512-1-100 - Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications EN 60512-1-100 - IEC 60999-1 - Connecting
22、 devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm (included) EN 60999-1 - IEC 60999-2 - Connecting devices - Electrical co
23、pper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm up to 300 mm (included) EN 60999-2 - IEC 61076-1 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic sp
24、ecification EN 61076-1 2006 IEC 61076-2 2011 Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors EN 61076-2 2011 IEC 62197-1 - Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification EN 621
25、97-1 - BS EN 61076-2-001:2011 2 61076-2-001 IEC:2011 CONTENTS INTRODUCTION . 7 1 Scope . 9 2 Normative references . 11 3 Technical information . 13 3.1 Terms and definitions 13 3.2 Systems of levels 13 3.2.1 Performance levels 13 3.2.2 Compatibility levels, according to IEC 61076-1 Ed. 2.0 13 3.3 Cl
26、assification into climatic categories 13 3.4 Creepage and clearance distances 15 3.5 Current-carrying capacity 15 3.6 Marking . 15 4 Dimensional information . 17 4.1 General . 17 4.2 Isometric view and common features . 17 4.2.1 Common features 19 4.2.2 Reference system 19 4.3 Engagement (mating) in
27、formation 21 4.3.1 Engaging (mating) direction . 21 4.3.2 Perpendicular to the engaging (mating) direction . 21 4.3.3 Inclination 21 4.4 Fixed connectors . 21 4.4.1 Dimensions . 21 4.4.2 Terminations . 21 4.5 Free connectors 23 4.5.1 Dimensions . 23 4.5.2 Terminations . 23 4.6 Accessories . 23 4.7 M
28、ounting information for connectors 23 4.7.1 Mounting on panels . 25 4.8 Gauges . 25 4.8.1 Sizing gauges and retention force gauges . 25 4.8.2 Mechanical function, engaging/separating/insertion/withdrawal force gauges 27 4.8.3 Probes . 27 4.8.4 Contact resistance gauge 27 4.8.5 Test panel (for voltag
29、e proof test) 27 4.8.6 Test panel (for EMC/ crosstalk etc.) . 27 5 Characteristics . 29 5.1 General . 29 5.2 Pin assignment and other definitions . 29 5.3 Classification into climatic categories 29 5.4 Electrical characteristics 29 5.4.1 Creepage and clearance distances 29 5.4.2 Voltage proof . 31 B
30、S EN 61076-2-001:201161076-2-001 IEC:2011 3 5.4.3 Current-carrying capacity. 31 5.4.4 Contact and shield resistance 31 5.4.5 Insulation resistance 31 5.4.6 Impedance. 33 5.5 Mechanical characteristics 35 5.5.1 Mechanical operation 35 5.5.2 Effectiveness of connector coupling devices 35 5.5.3 Engagin
31、g and separating forces (or insertion and withdrawal forces) . 35 5.5.4 Contact retention in insert 35 5.5.5 Polarizing and coding method 35 5.6 Other characteristics . 37 5.6.1 Shock and vibration (method either random or sine) 37 5.6.2 Degree of protection provided by enclosures (IP code) 37 5.6.3
32、 Screen and shielding properties 37 5.7 Environmental aspects 39 5.7.1 Marking of insulation material (plastics) . 39 5.7.2 Design/ use of material 39 6 Test schedule . 41 6.1 General . 41 6.1.1 Climatic category . 41 6.1.2 Creepage and clearance distances 43 6.1.3 Arrangement for contact resistance
33、 measurement . 43 6.1.4 Arrangement for dynamic stress tests 43 6.1.5 Arrangement for testing static load; axial . 43 6.1.6 Wiring of specimens 43 6.2 Test schedules 45 6.2.1 Basic (minimum) test schedule 45 6.2.2 Full test schedule 49 6.3 Test procedures and measuring methods 73 6.4 Pre-conditionin
34、g 73 6.5 Wiring and mounting of specimens 73 6.5.1 Wiring 73 6.5.2 Mounting . 73 Annex A (normative) New tests and additional test phases 74 Bibliography 75 Table 1 Performance levels . 13 Table 2 Isometric view and common features . 17 Table 3 Performance levels, example 28 Table 4 Performance leve
35、ls . 29 Table 5 Creepage and clearance distances 29 Table 6 Performance levels . 41 Table 7 Creepage and clearance distances 43 Table 8 Tests, example 44 Table 9 Basic tests 45 Table 10 Number of test specimens and contacts 49 Table 11 Test group P . 49 BS EN 61076-2-001:2011 4 61076-2-001 IEC:2011
36、Table 12 Test group AP . 53 Table 13 Test group BP . 59 Table 14 Test group CP . 63 Table 15 Test group DP . 65 Table 16 Test group EP . 67 Table 17 Test group FP . 67 Table 18 Test group GP . 69 Table 19 Test group HP . 69 Table 20 Test group KP . 71 Table 21 Test group LP 71 BS EN 61076-2-001:2011
37、61076-2-001 IEC:2011 7 INTRODUCTION This blank detail product specification is a supplementary document to the sectional product specification IEC 61076-2 and contains requirements for style, layout and content of detail product specifications for circular connectors. It should be used in conjunctio
38、n with the following publications: IEC 61076-1 and IEC 61076-2 for product requirements as well as IEC 62197-1 for quality requirements. The main content of this blank detail product specification is divided into two parts: on one page the example for a blank detail product specification, on the oth
39、er page the guidance notes referring to the example. The guidance notes have the same numbering as the relevant paragraphs of the example pages. The sample pages can be used like a template when preparing a detail product specification within the scope of this document. This document is not intended
40、 to replace the templates and guidance notes of IEC, but to assist in their application. All users are reminded to adhere to relevant directives and guidelines of the IEC when preparing a standard. NOTE 1 A detail quality specification IEC 62197-2-1xx should be prepared, based on the blank detail qu
41、ality specification for circular connectors IEC 62197-2-001 and its references and should be used in conjunction with the detail product specification IEC 61076-2-1xx. NOTE 2 The quality assessment requirements for connectors according to the IEC 61076 series are detailed in IEC 62197-1. BS EN 61076
42、-2-001:2011 8 61076-2-001 IEC:2011 Guidance notes The following pages give a recommended layout of a detail product specification. The contents of this page give guidance on the information which should, wherever possible, be given on the front page of a detail product specification (see IEC Guide 1
43、02). For the scope and definition of a detail product specification, see 1.2.3 of IEC 61076-1. The numbers between brackets on the front page of the detail product specification correspond to the following information. Identification of the detail product specification 1 The International Electrotec
44、hnical Commission or the national standards organization under whose authority the detail product specification is drafted. It shall also be stated where the detail product specification may be obtained. 2 The IEC number of the detail product specification and date of issue. 3 The IEC number and iss
45、ue number of the generic and the sectional specifications. 4 The national number of the detail product specification, if it differs from the IEC number. Identification of the connector 5 A short description of the type of connector. 6 Information on the typical construction of the connector, for exa
46、mple, it should be stated whether the connector is suitable for mounting on printed boards. 7 Outline drawing, preferably of isometric or similar projection, from which the connector may be clearly identified. 8 Information on performance level(s) and assessment level(s) specified in the document, i
47、f applicable. 9 Reference data on the most important properties, to allow comparison between the various connector types. NOTE It may be convenient to give some of this information in tabular form. BS EN 61076-2-001:201161076-2-001 IEC:2011 9 1 IEC Detail product specification number 2 Generic speci
48、fication number Electronic components of assessed quality in accordance with: 3 National number of detail product specification (it is not necessary to use this if the IEC number is identical) 4 Outline drawing 7 Product description 5 6 8 Performance level(s): Assessment level(s): Combination of per
49、formance levels and assessment levels: Reference data 9 1 Scope BS EN 61076-2-001:2011 10 61076-2-001 IEC:2011 Guidance notes 2 Normative references It may be necessary to refer to other documents in addition to those stated, in which case the list of related documents shall be extended beyond those referenced. If standards are referenced which are already listed in IEC 61076-1 and IEC 61076-2, their reference shal
