1、Connectors for electronic equipment Product requirementsPart 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHzBS EN 61076-3-110:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis Br
2、itish Standard is the UK implementation of EN 61076-3-110:2016.It is identical to IEC 61076-3-110:2016. It supersedes BS EN 61076-3-110:2012 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/48, Electromechanical components and mechanical structures f
3、or electronic equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.P
4、ublished by BSI Standards Limited 2016ISBN 978 0 580 86061 4ICS 31.220.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda iss
5、ued since publicationDate Text affectedBRITISH STANDARDBS EN 61076-3-110:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61076-3-110 November 2016 ICS 31.220.10 Supersedes EN 61076-3-110:2012 English Version Connectors for electronic equipment - Product requirements - Part 3-110: Detail spe
6、cification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz (IEC 61076-3-110:2016) Connecteurs pour quipements lectroniques - Exigences de produit - Partie 3-110: Spcification particulire pour les fiches et les embases pour la transmission de donnes des frquences
7、jusqu 3 000 MHz (IEC 61076-3-110:2016) Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 3-110: Bauartspezifikation fr freie und feste Steckverbinder fr Datenbertragungen bis 3 000 MHz (IEC 61076-3-110:2016) This European Standard was approved by CENELEC on 2016-10-04. CENE
8、LEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on a
9、pplication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN
10、-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary
11、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique
12、Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61076-3-110:2016 E BS EN 61076-3-110:2016EN 61076-3-110:2016 2 Eu
13、ropean foreword The text of document 48B/2496/FDIS, future edition 3 of IEC 61076-3-110, prepared by SC 48B “Electrical connectors” of IEC/TC 48 “Electrical connectors and mechanical structures for electrical and electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CE
14、NELEC as EN 61076-3-110:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-07-04 latest date by which the national standards conflicting with the document have to
15、 be withdrawn (dow) 2019-10-04 This document supersedes EN 61076-3-110:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorseme
16、nt notice The text of the International Standard IEC 61076-3-110:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-38 NOTE Harmonized as EN 60068-2-38.
17、 IEC 60603-7-81:2015 NOTE Harmonized as EN 60603-7-81:2016 (not modified). IEC 61076 Series NOTE Harmonized as EN 61076 Series. IEC 61076-3:2008 NOTE Harmonized as EN 61076-3:2008 (not modified). BS EN 61076-3-110:2016EN 61076-3-110:2016 3 Annex ZA (normative) Normative references to international p
18、ublications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refe
19、renced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available her
20、e: www.cenelec.eu Publication Year Title EN/HD Year IEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 60512 Series Connectors for electronic equipment - Tests and measurements EN 60512 Series IEC 60512-1 - Connectors for electronic equipment - Tests and measurements
21、 - Part 1: General EN 60512-1 - IEC 60512-25-9 - Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk EN 60512-25-9 - IEC 60512-28-100 - Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrit
22、y tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g EN 60512-28-100 - IEC 60603-7 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors EN 60603-7 - IEC 60603-7-1 - Connectors for electronic equip
23、ment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors EN 60603-7-1 - IEC 60603-7-7 2010 Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz EN 60603-7-7
24、 2010 IEC 60603-7-71 - Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1000 MHz EN 60603-7-71 - BS EN 61076-3-110:2016EN 61076-3-110:2016 4 Publication Year Title EN/HD Year IEC 60603-7
25、-82 2016 Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz EN 60603-7-82 201X 1)IEC 61076-1 - Connectors for electronic equipment - Product requirements - Part 1: G
26、eneric specification EN 61076-1 - IEC 62153-4-15 2015 Metallic communication cable test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell - - 1)To be published. BS EN 61076-3-
27、110:2016 2 IEC 61076-3-110:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms and definitions 8 4 Common features and isometric view . 9 4.1 General . 9 4.2 Cable terminations and internal connections Fixed and free connectors . 10 4.3 Mating information
28、 10 4.4 Mounting information . 10 5 Gauges . 11 6 Characteristics 11 6.1 General . 11 6.2 Classification into climate categories, clearance and creepage distances and current carrying capacity . 11 6.3 Electrical characteristics 11 6.4 Transmission characteristics . 11 6.4.1 General . 11 6.4.2 Inser
29、tion loss (IL) . 11 6.4.3 Return loss (RL) . 11 6.4.4 Propagation delay 12 6.4.5 Delay skew 12 6.4.6 Near-end crosstalk (NEXT) . 12 6.4.7 Power sum NEXT (PSNEXT) (for information only) . 12 6.4.8 Far-end crosstalk (FEXT) . 12 6.4.9 Power sum FEXT (PSFEXT) (for information only) 12 6.4.10 Transverse
30、conversion loss (TCL) 12 6.4.11 Transverse conversion transfer loss (TCTL) 12 6.4.12 Power sum alien (exogenous) NEXT (PSANEXT) 13 6.4.13 Power sum alien (exogenous) FEXT (PSAFEXT) 13 6.4.14 Coupling attenuation 13 6.5 Mechanical characteristics 13 7 Test schedule 13 7.1 General . 13 7.2 Test schedu
31、le . 14 7.2.1 Test group EP 14 Annex A (normative) Gauging requirements 15 A.1 Fixed connectors . 15 A.2 Free connectors 15 Bibliography . 16 Figure 1 Isometric view of fixed cable connector and free 4, 6 and 2 pair connectors, examples 9 Figure 2 Isometric view of fixed board connector, example 10
32、BS EN 61076-3-110:2016IEC 61076-3-110:2016 IEC 2016 3 Figure 3 Fixed connector pin numbering assignments (front view of connector), example . 10 Table 1 Test group EP . 14 BS EN 61076-3-110:2016 4 IEC 61076-3-110:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONNECTORS FOR ELECTRONIC EQU
33、IPMENT PRODUCT REQUIREMENTS Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical c
34、ommittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Techn
35、ical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmen
36、tal and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or ag
37、reements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international us
38、e and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to prom
39、ote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indic
40、ated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6)
41、 All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damag
42、e or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publi
43、cation. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all su
44、ch patent rights. International Standard IEC 61076-3-110 has been prepared by subcommittee 48B: Electrical connectors, of IEC technical committee 48: Electrical connectors and mechanical structures for electrical and electronic equipment. This third edition cancels and replaces the second edition pu
45、blished in 2012. This edition constitutes a technical revision. The main technical changes with regard to the previous edition are as follows: IEC 61076-3-110 series connectors have been updated to support intermateability with IEC 60603-7-82 (up to 2 000 MHz) connectors, in addition to IEC 60603-7-
46、71 (up to 1 000 MHz) connectors and IEC 60603-7-7 (up to 600 MHz) connectors for prior editions; the specifications cover electrical transmission requirements for frequencies up to 3 000 MHz. BS EN 61076-3-110:2016IEC 61076-3-110:2016 IEC 2016 5 The text of this standard is based on the following do
47、cuments: FDIS Report on voting 48B/2496/FDIS 48B/2509/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IE
48、C 61076 series, under the general title Connectors for electronic equipment Product requirements, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“
49、 in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61076-3-110:2016 6 IEC 61076-3-110:2016 IEC 2016 INTRODUCTION This detail specification describes connectors according to the IEC 61076-3 series connector requirements. This detail specification describes connectors that are similar to, intermateable with, and intended to be used with IEC 60603-7 series conn
