1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-14: Installation of fieldbuses Installation profiles for CPF 14BS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking
2、 permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-14:2013. It isidentical to IEC 61784-5-14:2013. It supersedes BS EN 61784-5-14:2012which is withdrawn.The UK participation in its preparation was entrusted to Technical Com-mittee AM
3、T/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its co
4、rrect application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84200 9ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Polic
5、y and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted wi
6、thout license from IHS-,-,-EUROPEAN STANDARD EN 61784-5-14 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Ave
7、nue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-14:2013 E ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-14:2012 English version Industrial communication networks - Profiles - Part 5-1
8、4: Installation of fieldbuses - Installation profiles for CPF 14 (IEC 61784-5-14:2013) Rseaux de communication industriels - Profils - Partie 5-14: Installation des bus de terrain - Profils dinstallation pour CPF 14 (CEI 61784-5-14:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-14: Feldbu
9、sinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 14 (IEC 61784-5-14:2013) This European Standard was approved by CENELEC on 2013-10-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar
10、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (Engli
11、sh, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of
12、Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
13、Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 61784-5-14:2013 - 2 - Foreword The
14、text of document 65C/738/FDIS, future edition 2 of IEC 61784-5-14, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-14:2013. The following dates are fixe
15、d: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-18 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-18 This document supersedes EN
16、 61784-5-14:2012. IEC 61784-5-14:2013 includes the following significant technical changes with respect to EN 61784-5-14:2012: - requirements for CP 14/3 have been added; - recommendations for the applications about the linear/ring topology networks have been added; - Table A.2 and Table A.6 have be
17、en updated. This standard is to be used in conjunction with EN 61918:2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement
18、 notice The text of the International Standard IEC 61784-5-14:2013 was approved by CENELEC as a European Standard without any modification. BS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or network
19、ing permitted without license from IHS-,-,- 3 - EN 61784-5-14:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable fo
20、r its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
21、applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN 61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784-5-14:2013Copyright Britis
22、h Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 61784-5-14 IEC:2013 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions and abbreviated terms . 7
23、 4 CPF 14: Overview of installation profiles 7 5 Installation profile conventions . 7 6 Conformance to installation profiles 8 Annex A (Normative) CP 14/1, 14/2 and 14/3 (EPA) specific installation profile . 9 A.1 Installation profile scope . 9 A.2 Normative references . 9 A.3 Installation profile t
24、erms, definitions, and abbreviated terms . 9 A.3.1 Terms and definitions 9 A.3.2 Abbreviated terms . 9 A.3.3 Conventions for installation profiles . 9 A.4 Installation planning . 9 A.4.1 General . 9 A.4.2 Planning requirements . 9 A.4.3 Network capabilities 12 A.4.4 Selection and use of cabling comp
25、onents 16 A.4.5 Cabling planning documentation 23 A.4.6 Verification of cabling planning specification . 23 A.5 Installation implementation . 23 A.5.1 General requirements 23 A.5.2 Cable installation . 23 A.5.3 Connector installation 25 A.5.4 Terminator installation . 30 A.5.5 Device installation .
26、30 A.5.6 Coding and labelling 30 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 30 A.5.8 As-implemented cabling documentation . 30 A.6 Installation verification and installation acceptance test 30 A.6.1 General . 30 A.6.2 Installation verification . 30 A.6.3 Installation ac
27、ceptance test . 31 A.7 Installation administration . 32 A.8 Installation maintenance and installation troubleshooting . 32 Figure 1 Standards relationships 6 Figure A.1 Example of EPA explosion-proof system . 10 Figure A.2 Earth of zener safety barrier . 11 Figure A.3 Earth of isolated safety barrie
28、r 11 Figure A.4 Three stars coupled to a ring topology 12 Figure A.5 Five daisy chain lines coupled to a ring topology 12 BS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted with
29、out license from IHS-,-,-61784-5-14 IEC:2013 3 Figure A.6 Five sub-rings coupled to a ring topology 13 Figure A.7 Example of power with Ethernet 15 Figure A.8 Example of power supply over 0,2 A . 16 Figure A.9 Example of power with Ethernet in linear/ring topology network 16 Figure A.10 Examples of
30、earthing method for the linear/ring topologies network 22 Figure A.11 Pin assignment of sub-D connector . 25 Figure A.12 Example of a 4-pin open style connector . 27 Figure A.13 Example of a 6-pin open style connector . 28 Figure A.14 Example of an 8-pin open style connector . 29 Table A.1 Network c
31、haracteristics for balanced cabling based on Ethernet 14 Table A.2 Network characteristics for optical fibre cabling 14 Table A.3 Information relevant to copper cable 16 Table A.4 Information relevant to copper cable: fixed cables 17 Table A.5 Information relevant to copper cable: cords 17 Table A.6
32、 Information relevant to optical fibre cables . 18 Table A.7 Connectors for balanced cabling CPs based on Ethernet . 19 Table A.8 Optical fibre connecting hardware 19 Table A.9 Relationship between FOC and fibre type (CP 14/1, CP 14/2 and CP 14/3) 20 Table A.10 Specific connectors for balanced cabli
33、ng based on Ethernet 20 Table A.11 Requirements of sub-D and open style connector 21 Table A.12 Parameters for balanced cables . 23 Table A.13 Parameters for silica optical fibre cables 24 Table A.14 Parameters for POF optical fibre cables . 24 Table A.15 Parameters for hard cladded silica optical f
34、ibre cables . 24 Table A.16 Signal lines assignment of sub-D connector . 26 Table A.17 Signal lines assignment of sub-D connector for 1 000 Base Ethernet . 26 Table A.18 Signal lines assignment for a 4-pin open style connector . 27 Table A.19 Signal lines assignment for a 6-pin open style connector
35、. 28 Table A.20 Signal lines assignment for an 8-pin open style connector(10/100 Mbps) . 29 Table A.21 Signal lines assignment for an 8-pin open style connector(1 000 Mbit/s) 30 BS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy No
36、t for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 61784-5-14 IEC:2013 INTRODUCTION This International Standard is one of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2013 provides the common requirements
37、for the installation of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where ne
38、cessary, by supplementing, modifying, or replacing the other requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specified in this standard, see IEC 61158-1. Each CP installation profile is specified in a separate anne
39、x of this standard. Each annex is structured exactly as the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918 (planner, installer, verification personnel, validation personnel, maintenance personnel, admini
40、stration personnel). By reading the installation profile in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified or replaced. The conventions used to draft this standard are defined in Clause 5. The provision
41、of the installation profiles in one standard for each CPF (for example IEC 61784-5-14 for CPF 14), allows readers to work with standards of a convenient size. Figure 1 Standards relationships BS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncont
42、rolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-14 IEC:2013 7 INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 1 Scope This part of IEC 61784-5 specifies the installation profiles
43、for CPF 14 (EPA1). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2013. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refere
44、nces, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61918:2013, Industrial communication networks Installation of communication networks in industrial premises The normative references of IEC 61918:2013,
45、Clause 2, apply. 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviated terms of IEC 61918 :2013 Clause 3, apply. 4 CPF 14: Overview of installation profiles CPF 14 consists of three communication profiles as specified in IEC 61784-2. The
46、 installation requirements for CP 14/1, CP 14/2 and CP 14/3 (EPA) are specified in Annex A. 5 Installation profile conventions The numbering of the clauses and subclauses in the annexes of this standard corresponds to the numbering of IEC 61918 main clauses and subclauses. The annex clauses and subc
47、lauses of this standard supplement, modify, or replace the respective clauses and subclauses in IEC 61918. _ 1 EPA is the technology name of the CPF14. EPA is the trade name of Zhejiang SUPCON Technology Group Co. Ltd, China. This information is given for the convenience of users of this document an
48、d does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name. Use of the trade name requires permission of the trade name holder. BS EN 61784-5-14:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 61784-5-14 IEC:2013 Where there is no corresponding s
