1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationIndustrial communication networks ProfilesPart 5-15: Installation of fieldbuses Installation profiles for CPF 15BS EN 61784-5-15:2012Copyright European Committee for Electrotechn
2、ical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-15:2012. It isidentical to IEC 61784-5-15:2010.The UK participation in its p
3、reparation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, includ-ing fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provis
4、ions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 72463 3ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was p
5、ublished under the authority of the StandardsPolicy and Strategy Committee on 31 May 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61784-5-15:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot
6、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 61784-5-15 NORME EUROPENNE EUROPISCHE NORM April 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotec
7、hnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-15:2012 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profiles -
8、Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 (IEC 61784-5-15:2010) Rseaux de communication industriels - Profils - Partie 5-15: Installation des bus de terrain - Profils dinstallation pour CPF 15 (CEI 61784-5-15:2010) Industrielle Kommunikationsnetze - Profile - Teil 5-15
9、: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 15 (IEC 61784-5-15:2010) This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
10、 Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official version
11、s (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical commit
12、tees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur
13、key and the United Kingdom. BS EN 61784-5-15:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 61784-5-15:2012 - 2 - Foreword The text of document 65C/6
14、02/FDIS, future edition 1 of IEC 61784-5-15, prepared by SC 65C, “Industrial networks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-15:2012. The following dates are fixed: latest date by w
15、hich the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-10-19 This standard is to be used in conjunction wit
16、h IEC 61918, second edition (2010-07), together with the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying a
17、ny or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-15:2010 was approved by CENELEC as a European Standard without any modification. BS EN 61784-5-15:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license wi
18、th CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 61784-5-15:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the app
19、lication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevan
20、t EN/HD applies. Publication Year Title EN/HD Year IEC 61918 2010 Industrial communication networks - Installation of communication networks in industrial premises - - BS EN 61784-5-15:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot
21、 for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 61784-5-15 IEC:2010(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions and abbreviated terms .6 4 CPF 15: Overview of installation profiles 6 5 Installation profile conventions .6 6 Co
22、nformance to installation profiles7 Annex A (normative) CP 15/1 (MODBUS-TCP) and CP 15/2 (RTPS) specific installation profile .9 Bibliography23 Figure 1 Standards relationships5 Figure A.1 Combined basic topologies .10 Table A.1 Network characteristics for balanced cabling based on Ethernet 11 Table
23、 A.2 Network characteristics for optical fibre cabling12 Table A.3 Information relevant to copper cable: fixed cables.13 Table A.4 Information relevant to copper cable: flexible cables 14 Table A.5 Information relevant to copper cable: special cables .14 Table A.6 Information relevant to copper cabl
24、e: cords15 Table A.7 Information relevant to optical fibre cables .16 Table A.8 Connectors for balanced cabling CPs based on Ethernet .16 Table A.9 Optical fibre connecting hardware 17 Table A.10 Parameters for balanced cables .19 Table A.11 Parameters for silica optical fibre cables 19 Table A.12 P
25、arameters for POF optical fibre cables .19 Table A.13 Parameters for hard clad silica optical fibre cables.20 BS EN 61784-5-15:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without
26、 license from IHS-,-,-61784-5-15 IEC:2010(E) 5 INTRODUCTION This International Standard is one of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2010 provides the common requirements for the installation of communication networks in industr
27、ial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supplementing, modifying, or replacing the ot
28、her requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specified in this standard, see IEC/TR 61158-1. Each CP installation profile is specified in a separate annex of this standard. Each annex is structured exactly a
29、s the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918 (planner, installer, verification personnel, validation personnel, maintenance personnel, administration personnel). By reading the installation profi
30、le in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified or replaced. The conventions used to draft this standard are defined in Clause 5. The provision of the installation profiles in one standard for each
31、CPF (for example IEC 61784-5-15 for CPF 15), allows readers to work with standards of a convenient size. Figure 1 Standards relationships BS EN 61784-5-15:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or
32、networking permitted without license from IHS-,-,- 6 61784-5-15 IEC:2010(E) INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-15: Installation of fieldbuses Installation profiles for CPF 15 1 Scope This part of IEC 61784 specifies the installation profiles for CPF 15/1 (MODBUS-TCP)1and CPF 15/2 (RTP
33、S). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2010. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referen
34、ces, the latest edition of the referenced document (including any amendments) applies. IEC 61918:2010, Industrial communication networks Installation of communication networks in industrial premises The normative references of IEC 61918:2010, Clause 2, apply. For profile specific normative reference
35、s, see Clause A.2. 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviated terms of IEC 61918 Clause 3:2010, apply. For profile specific terms, definitions and abbreviated terms see Clause A.3. 4 CPF 15: Overview of installation profiles C
36、PF 15 consists of two communication profiles as specified in IEC 61784-2. The installation requirements for CP 15/1 (MODBUS TCP) and CP 15/2 (MODBUS with RTPS) are identical and are specified in Annex A. 5 Installation profile conventions The numbering of the clauses and subclauses in the annexes of
37、 this standard corresponds to the numbering of IEC IEC 61918 main clauses and subclauses. 1MODBUS is a trademark of Schneider Automation Inc. registered in the United States of America and other countries. This information is given for the convenience of users of this International Standard and does
38、 not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trademark MODBUS. Use of the trademark MODBUS requires permission from Schneider Automation Inc. BS EN 61784-5-15:2012Copyright European Committee for Electrot
39、echnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-15 IEC:2010(E) 7 The annex clauses and subclauses of this standard supplement, modify, or replace the respective clauses and subclauses in IEC
40、 61918. Where there is no corresponding subclause of IEC 61918. in the normative annexes in this standard, the subclause of I IEC 61918 applies without modification. The annex heading letter represents the installation profile assigned in Clause 4. The annex (sub)clause numbering following the annex
41、 letter shall represent the corresponding (sub)clause numbering of IEC 61918. EXAMPLE “Annex B.4.4” in IEC 61784-5-3 means that CP 3/2 specifies the Subclause 4.4 of IEC 61918. All main clauses of IEC 61918 are cited and apply in full unless otherwise stated in each normative installation profile an
42、nex. If all subclauses of a (sub)clause are omitted, then the corresponding IEC 61918 (sub)clause applies. If in a (sub)clause it is written “Not applicable”, then the corresponding IEC 61918 (sub)clause does not apply. If in a (sub)clause it is written “Addition”, then the corresponding IEC 61918 (
43、sub)clause applies with the additions written in the profile. If in a (sub)clause it is written “Replacement”, then the text provided in the profile replaces the text of the corresponding IEC 61918 (sub)clause. NOTE A replacement can also comprise additions. If in a (sub)clause it is written “Modifi
44、cation”, then the corresponding IEC 61918 (sub)clause applies with the modifications written in the profile. If all (sub)clauses of a (sub)clause are omitted but in this (sub)clause it is written “(Sub)clause x has addition” (or “replacement”) or “(Sub)clause x is not applicable”, then (sub)clause x
45、 becomes valid as declared and all the other corresponding IEC 61918 (sub)clauses apply. 6 Conformance to installation profiles Each installation profile within this standard includes part of IEC 61918:2010. It may also include defined additional specifications. A statement of compliance to an insta
46、llation profile of this standard shall be stated2as either Compliance to IEC 61784-5-15:20103for CP 15/n or Compliance to IEC 61784-5-15 (Ed.2.0) for CP 15/n where the name within the angle brackets is optional and the angle brackets are not to be included. The n within CP 15/n shall be replaced by
47、the profile number 1 or 2. NOTE The name may be the name of the profile, for example MODBUS-TCP. If the name is a trade name then the permission of the trade name holder shall be required. 2In accordance with ISO/IEC Directives 3The date should not be used when the edition number is used. BS EN 6178
48、4-5-15:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 61784-5-15 IEC:2010(E) Product standards shall not include any conformity assessment aspects (including quality management provisions), neither normative nor informative, other than provisions for product testing (evaluation and examination). BS EN 61784-5-15:2012Copyright European Committee for Electrotec
