1、BRITISH STANDARD BS EN 61851-22:2002 Electric vehicle conductive charging system Part 22: AC electric vehicle charging station The European Standard EN 61851-22:2002 has the status of a British Standard ICS 43.120 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 61851-22:2
2、002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 20 May 2002 BSI 20 May 2002 ISBN 0 580 39632 0 National foreword This British Standard
3、 is the official English language version of EN 61851-22:2002. It is identical with IEC 61851-22:2001. The UK participation in its preparation was entrusted to Technical Committee PEL/69, Electric vehicles, which has the responsibility to: A list of organizations represented on this committee can be
4、 obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain iden
5、tifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility
6、 of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligation
7、s. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pag
8、es This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 23, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 61851-22
9、NORME EUROPENNE EUROPISCHE NORM January 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploi
10、tation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61851-22:2002 E ICS 43.120 English version Electric vehicle conductive charging system Part 22: AC electric vehicle charging station (IEC 61851-22:2001) Systme de charge conductive pour vhicules lectriques Partie
11、 22: Borne de charge conductive en courant alternatif pour vhicules lectriques (CEI 61851-22:2001) Konduktive Ladesysteme fr Elektrofahrzeuge Teil 22: Wechselstrom-Ladestation fr Elektrofahrzeuge (IEC 61851-22:2001) This European Standard was approved by CENELEC on 2001-12-04. CENELEC members are bo
12、und to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
13、Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the sam
14、e status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN
15、61851-22:2002 - 2 - Foreword The text of document 69/129/FDIS, future edition 1 of IEC 61851-22, prepared by IEC TC 69, Electric road vehicles and electric industrial trucks, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61851-22 on 2001-12-04. The following dates
16、were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-10-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-01-01 This European Standard shall b
17、e read in conjunction with EN 61851-1. Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61851-22:2001 was approved by CENELEC as a European
18、 Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60309-1 NOTE Harmonized as EN 60309-1:1999 (not modified). IEC 60364-5-54 NOTE Harmonized as HD 384.5.54 S1:1988 (modified). CISPR 11 NOTE Harmonized a
19、s EN 55011:1998 (modified). CISPR 14 NOTE Harmonized as EN 55014 Series (not modified). _ Page2 EN6185122:2002 BSI20May2002-158161002:CEI 22 3 CONTENTS 1 Scope.5 2 Normative references5 3 Definitions 7 4 General requirements .7 5 Standard conditions for operation in service and for installation.7 6
20、Rating of the a.c. input and output.7 7 General test requirements.8 8 Functional and constructional requirements.8 8.1 Control functions .8 8.2 Emergency service 8 8.3 Permissible surface temperature8 8.4 Charging station protection degree (IP)9 8.5 Storage means for the cable assembly.9 8.6 Locatio
21、n of the socket-outlet and storage means for the connector.9 8.7 Extension cord.9 8.8 Metering9 9 Electrical safety 9 9.1 Protection against indirect contact .9 9.2 Earthing electrode and continuity .10 9.3 Detection of the electrical continuity of the protective conductor .10 10 Dielectric test req
22、uirements 10 10.1 Dielectric withstand characteristics 10 10.1.1 Dielectric withstand voltage10 10.1.2 Impulse dielectric withstand (1,2/50 s)11 10.1.3 Insulation resistance11 10.2 Touch current 11 10.3 Protection measures12 10.4 Creepage and clearance distances 12 11 Environmental tests 12 11.1 Cli
23、matic environmental tests 12 11.1.1 General .12 11.1.2 Ambient air temperature.12 11.1.3 Dry heat.12 11.1.4 Ambient humidity .12 11.1.5 Cold test13 11.1.6 Ambient air pressure13 11.1.7 Solar radiation (optional)13 11.1.8 Saline mist (optional) .13 Page3 EN6185122:2002 BSI20May2002-158161002:CEI 22 4
24、 11.2 Mechanical environmental tests .13 11.2.1 General .13 11.2.2 Mechanical impact .13 11.2.3 Stability .14 11.3 Electromagnetic environmental tests14 11.3.1 Immunity to EM disturbances .14 11.3.2 Immunity to electrostatic discharges.14 11.3.3 Emitted EM disturbances .17 12 Specific socket-outlet/
25、connector requirements.19 13 Classification19 14 Marking and instructions .19 14.1 Connection instructions19 14.2 Legibility19 14.3 Marking of a.c. electric vehicle charging station19 Bibliography20 Figure 1 Limit levels of conducted emission (a.c. input terminal) .17 Figure 2 Limit levels of conduc
26、ted emission (signal I/O and control)18 Figure 3 Limit levels of radiated emission .18 Table 1 Values of output voltage and current rating 8 Table 2 Touch current limits .11 Annex ZA (normative) Normative references to international publications with their corresponding European publications 21 Page
27、4 EN6185122:2002 BSI20May2002-158161002:CEI 22 5 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM Part 22: AC electric vehicle charging station 1 Scope This part of IEC 61851, together with part 1, gives the requirements for a.c. electric vehicle charging stations for conductive connection to an electric
28、 vehicle, with a.c. supply voltages according to IEC 60038 up to 690 V. This standard does not cover all safety aspects related to maintenance. The scope of this part of IEC 61851 does not cover box type assemblies with socket-outlets, installed for the purpose of delivering energy to the vehicle, w
29、hich have no charging control functions. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 61851. For dated references, subsequent amendments to, or revisions of, any of these publications do n
30、ot apply. However, parties to agreements based on this part of IEC 61851 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of
31、 ISO and IEC maintain registers of currently valid International Standards. IEC 60038:1983, IEC standard voltages IEC 60068-2-1:1990, Environmental testing Part 2: Tests Tests A: Cold IEC 60068-2-2:1974, Environmental testing Part 2: Tests Tests B: Dry heat IEC 60068-2-3:1969, Environmental testing
32、Part 2: Tests Test Ca: Damp heat, steady state IEC 60068-2-5:1975, Environmental testing Part 2: Tests Test Sa: Simulated solar radiation at ground level IEC 60068-2-14:1984, Environmental testing Part 2: Tests Test N: Change of temperature IEC 60068-2-30:1980, Environmental testing Part 2: Tests Te
33、st Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) IEC 60068-2-52:1996, Environmental testing Part 2: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) Page5 EN6185122:2002 BSI20May2002-158161002:CEI 22 6 IEC 60068-2-75:1997, Environmental testing Part 2: Tests Test Eh: Hammer test
34、s IEC 60364-4-43:1977, Electrical installations of buildings Part 4: Protection for safety Chapter 43: Protection against overcurrent IEC 60364-4-443:1995, Electrical installations of buildings Part 4: Protection for safety Chapter 44: Protection against overvoltages Section 443: Protection against
35、overvoltages of atmospheric origin or due to switching Amendment 1 (1998) 1) IEC 60439-1:1999 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies IEC 60529:1989, Degrees of protection provided by enclosures (IP Code) IEC 60664-1:1992, Insulation
36、 coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests IEC 60950:1999, Safety of information technology equipment IEC 61000-2-2:1990, Electromagnetic compatibility (EMC) Part 2: Environment Compati- bility levels for low-frequency conducted disturbances and
37、 signalling in public low-voltage power supply systems IEC 61000-3-2:2000, Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current 16 A per phase) IEC 61000-4-1:2000, Electromagnetic compatibility (EMC) Part 4-1: Testing and measure- ment t
38、echniques Overview of IEC 61000-4 series IEC 61000-4-2:1995, Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques Section 2: Electrostatic discharge immunity test Basic EMC publication 2) Amendment 1 (1998) Amendment 2 (2000) IEC 61000-4-3:1995, Electromagnetic compatibil
39、ity (EMC) Part 4: Testing and measurement techniques Section 3: Radiated, radio-frequency, electromagnetic field immunity test 3) Amendment 1 (1998) Amendment 2 (2000) IEC 61000-4-4:1995, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 4: Electrical fast transi
40、ent/burst immunity test Basic EMC publication Amendment 1 (2000) IEC 61000-4-5:1995, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 5: Surge immunity test _ 1)There exists a consolidated edition 2.1 (1999) that includes IEC 60364-4-443 (1995) and its amendment
41、 1 (1998). 2)There exists a consolidated edition 1.1 (1999) that includes IEC 61000-4-2 (1995) and its amendment 1 (1998). 3) There exists a consolidated edition 1.1 (1998) that includes IEC 61000-4-3 (1995) and its amendment 1 (1998). Page6 EN6185122:2002 BSI20May2002-158161002:CEI 22 7 IEC 61000-4
42、-11:1994, Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques Section 11: Voltage dips, short interruptions and voltage variations immunity tests IEC 61036:1996, Alternating current static watt-hour meters for active energy (Classes 1 and 2) IEC 61180-1:1992, High-voltage
43、test techniques for low-voltage equipment Part 1: Definitions, test and procedure requirements CISPR 16 (all parts), Specification for radio disturbance and immunity measuring apparatus and methods CISPR 22:1997, Information technology equipment Radio disturbance characteristics Limits and methods o
44、f measurement 3 Definitions Clause 3 of part 1 applies. Additional definitions relating to this part of the standard are under consideration. 4 General requirements The connection of electric vehicles can be made by one or more of the methods described in part 1. The a.c. electric vehicle charging s
45、tation may have one or more socket-outlets/vehicle connectors. The a.c. electric vehicle charging station shall be connected to the electric vehicle so that in normal conditions of use the equipment operates to reduce the risk of fire, electric shock or injury to persons, either indoors or outdoors.
46、 In general, this is achieved by fulfilling the relevant requirements specified in this standard and compliance is checked by carrying out all relevant tests. General requirements for the a.c. electric vehicle charging station can also be found in IEC 60439-1. 5 Standard conditions for operation in
47、service and for installation The rated value of the a.c. supply voltage is up to 690 V. The equipment shall operate correctly within 10 % of the standard nominal voltage (see IEC 60038). The rated value of the frequency is 50 Hz 1 % or 60 Hz 1 %. The ambient temperature range during charging may be
48、between 30 C and +50 C and at a relative humidity of between 5 % and 95 %. NOTE National codes and regulations may require different operating temperature ranges. 6 Rating of the a.c. input and output The input voltage and current rating is according to IEC 60038. The output voltage and current rati
49、ng shall not exceed the values given in table 1. Lower current values may be used. Page7 EN6185122:2002 BSI20May2002-158161002:CEI 22 8 Table 1 Values of output voltage and current rating Output option AC output A Single-phase, 230 V, 32 A B Single/three-phase, 230/400 V, 32 A C Three-phase, 500 V, 250 A 7 General test requirements 7.1 All test
