1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationDevices for the connection ofluminaires for household and similar purposes Part 2: Standard sheets for DCLBS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS,
2、 14/04/2010 06:44, Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 61995-2:2009. It isidentical to IEC 61995-2:2009.The UK participation in its preparation was entrusted to Technical CommitteePEL/23, Electrical accessories.A list of organizations repre
3、sented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 57058 2ICS 29.120.20; 29.140.40Compliance with a British Standard cann
4、ot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2010Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA
5、 STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 61995-2 NORME EUROPENNE EUROPISCHE NORM May 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secre
6、tariat: avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61995-2:2009 E ICS 29.120.20; 29.140.40 English version Devices for the connection of luminaires for household and similar purposes -
7、 Part 2: Standard sheets for DCL (IEC 61995-2:2009) Dispositifs de connexion pour luminaires pour usage domestique et analogue - Partie 2: Feuilles de norme pour DCL (CEI 61995-2:2009) Betriebsmittel fr den Anschluss von Leuchten fr Haushalt und hnliche Zwecke - Teil 2: Normbltter fr Betriebsmittel
8、zum Anschluss einer Leuchte (IEC 61995-2:2009) This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any al
9、teration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by
10、 translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Eston
11、ia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STAND
12、ARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSIEN 61995-2:2009 2 Foreword The text of document 23B/919/FDIS, future edition 1 of IEC 61995-2, prepared by SC 23B, Plugs, socket-outlets and switches, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and was approv
13、ed by CENELEC as EN 61995-2 on 2009-04-01. This European Standard is to be read in conjunction with EN 61995-1. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-01-01 late
14、st date by which the national standards conflicting with the EN have to be withdrawn (dow) 2019-04-01 Annexes ZA and ZB have been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61995-2:2009 was approved by CENELEC as a European Standard without any modification. _
15、BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSI 3 EN 61995-2:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indisp
16、ensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by
17、 (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 61995-1 (mod) 2005 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements EN 61995-1 2008 BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010
18、06:44, Uncontrolled Copy, (c) BSIEN 61995-2:2009 4 Annex ZB (normative) Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonizati
19、on, it forms part of the European Standard. For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Clause Special national condition 4 Figure 1 Finland DCL outlets shall be provided with a hook. _ BS EN 6199
20、5-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSI 2 61995-2 IEC:2009 CONTENTS 1 Scope.5 2 Normative references .5 3 Requirements and tests5 4 Standard sheets .5 Figure 1 Example of use of a DCL socket and a DCL plug inserted in a flush type b
21、ox in a ceiling 11 BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSI61995-2 IEC:2009 5 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES Part 2: Standard sheets for DCL 1 Scope This part of IEC 61995, which
22、 is to be read in conjunction with IEC 61995-1, applies to devices for the connection of luminaires (DCL) 250 V, 6 A a.c. intended for household and similar purposes, for the electrical connection to final circuits rated not more than 16 A, without providing mechanical support for the luminaire. 2 N
23、ormative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61995-1:2005, Devices for
24、 the connection of luminaires for household and similar purposes Part 1: General requirements 3 Requirements and tests Devices for the connection of luminaires shall comply with all the relevant requirements of Part 1 (IEC 61995-1). In particular, devices for the connection of luminaires classified
25、according to 7.1 a) in Part 1 shall comply with the relevant standard sheets of this Part 2; these devices require provision of information in accordance with Subclause 8.3 of Part 1; these devices shall comply with Clause 20 of Part 1 with the following modification. Replacement of the last two par
26、agraphs in Clause 20 of Part 1 by the following new paragraph: In no single movement shall the force required to insert or withdraw the plug exceed 50 N nor shall it be less than 10 N. 4 Standard sheets This part contains the following Standard Sheets: Standard Sheet 1-1: DCL outlet, 6 A 250 V a.c.
27、2 P + E Standard Sheet 1-2: DCL plug, 6 A 250 V a.c. 2 P + E Standard Sheet 1-3: DCL plug, 6 A 250 V a.c. 2 P Standard sheet 1-4: Gauge for testing DCL plug functions This part of IEC 61995 contains also an example of the use of the above DCL inserted in a flush type box in a ceiling (see Figure 1).
28、 BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSI 6 61995-2 IEC:2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-1 DCL OUTLET 6 A 250 V a.c. 2 P + Dimensions in millimetres The drawi
29、ng is intended only to illustrate the dimensions essential for interchangeability. Radius without dimensions: 0,5 mm max. 1 This dimension concerns only the flush type DCL outlet. 2 The overall dimension of the DCL outlet shall be less than or equal to 40 mm. 3 Entry holes slightly rounded or sloped
30、 to ensure an easy introduction of the pins of the DCL plug. 4 Angle +5,005,0 concerns also chamfers. IEC 136/09 BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSI61995-2 IEC:2009 7 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEH
31、OLD AND SIMILAR PURPOSES STANDARD SHEET 1-2 DCL PLUG 6 A 250 V a.c. 2 P + Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability. Radius without dimensions: 0,5 mm min. 1 This part shall be resilient. 2 The section of the pins of the DCL
32、plug shall have the same dimensions. 3 The retention means shall be designed by the DCL plug manufacturer to ensure the withdrawal force according to Clause 3. 4 The DCL plug shall enter without undue force into the min. gauge, representing the smallest possible entry hole. 5 The pins of the DCL plu
33、g shall be slightly rounded or sloped to ensure their easy introduction in the entry holes of the DCL outlet. 6 This dimension shall be kept within 6 mm min. from the reference face C. IEC 137/09 BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled
34、Copy, (c) BSI 8 61995-2 IEC:2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-3 DCL PLUG 6 A 250 V a.c. 2 P Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability. IEC 138/09 BS EN 61995-2:2
35、009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSI61995-2 IEC:2009 9 Radius without dimensions : 0,5 mm min. 1 This part shall be resilient. 2 The section of the pins of the DCL plug shall have the same dimensions. 3 The retention means shall be de
36、signed by the DCL plug manufacturer to ensure the withdrawal force according to Clause 3. 4 The DCL plug shall enter without undue force into the min. gauge, representing the smallest possible entry hole. 5 The pins of the DCL plug shall be slightly rounded or sloped to ensure their easy introductio
37、n in the entry holes of the DCL outlet. 6 This dimension shall be kept within 6 mm min. from the reference face C. 7 This dummy pin shall be of insulating material. 8 These dimensions apply to L and N pins. BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Un
38、controlled Copy, (c) BSI 10 61995-2 IEC:2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-4 Gauge for testing DCL plug functions Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability. SECTI
39、ON: C-CAA3+0,0504chamfers3000,5 conic4 chamfersBR0,5intheedges24,3+0,020CCC0,50,030,50,0315,20-0,02B6,350-0,021,05+0,02+0,014,50,0110,50,019,25+0,01012,90,0113,350-0,017,57,53 entry hole0,01 C A B0,50,03 0,50,0330,30,010,01 A0,01 C A B3 entry hole10,1D107,8+0,020+0,10,01 C0,01 CSECTION: A-A SECTION:
40、B-B+x 300,03-A0,1max. chamferedor roundedDETAIL: FB1.25+0.02+020.1DETAIL: DFPURPOSE: To check compliance of the outside dimensions of the DCL plug, flexibility and snap-in function of the retaining means, the withdrawal force of the DCL plug caused by the retaining mean, position and alignment of th
41、e pins of the DCL plug. TESTING: described in the requirements. IEC 139/09 BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSI61995-2 IEC:2009 11 Figure 1 Example of use of a DCL socket and a DCL plug inserted in a flush type box in a
42、 ceiling _ IEC 140/09 BS EN 61995-2:2009Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/04/2010 06:44, Uncontrolled Copy, (c) BSIBSI is the independent nation
43、al body responsible for preparing British Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI
44、Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of
45、 our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996
46、 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit c
47、ard from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI im
48、plementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discount
