1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Non-electrical characteristics and measuring methods Part 1: Fixed, surface mounted inductors for u
2、se in electronic and telecommunication equipment The European Standard EN 62025-1:2007 has the status of a British StandardICS 29.100.10High frequency inductive components BRITISH STANDARDBS EN 62025-1:2007BS EN 62025-1:2007This British Standard was published under the authority of the Standards Pol
3、icy and Strategy Committee on 28 September 2007 BSI 2007ISBN 978 0 580 55895 5Amendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British
4、Standard cannot confer immunity from legal obligations.National forewordThis British Standard is the UK implementation of EN 62025-1:2007. It is identical to IEC 62025-1:2007. It supersedes BS EN 62025-1:2002 which is withdrawn.The UK participation in its preparation was entrusted to Technical Commi
5、ttee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of organizations represented on this committee can be obtained on request to its secretary.EUROPEAN STANDARD EN 62025-1 NORME EUROPENNE EUROPISCHE NORM August 2007 CENELEC European Committee for Electrotechnical S
6、tandardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62025-
7、1:2007 E ICS 29.100.10 Supersedes EN 62025-1:2002English version High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment (IEC 62025-1:2007) Composants inductifs haute f
8、rquence - Caractristiques non lectriques et mthodes de mesure - Partie 1: Inductances fixes pour montage en surface utilises dans les matriels lectroniques et les quipements de tlcommunications (CEI 62025-1:2007) Induktive Hochfrequenzbauelemente - Nicht elektrische Eigenschaften und Messmethoden -
9、Teil 1: Oberflchenmontierbare Festinduktivitten fr den Einsatz in Elektronik und Telekommunikationsgerten (IEC 62025-1:2007) This European Standard was approved by CENELEC on 2007-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
10、giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in two official
11、 versions (English and German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of
12、 Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingd
13、om. Foreword The text of document 51/883/FDIS, future edition 2 of IEC 62025-1, prepared by IEC TC 51, Magnetic components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62025-1 on 2007-06-01. This European Standard supersedes EN 62025-1:2002.
14、 This European Standard includes the following significant technical changes with respect to EN 62025-1:2002: nomenclature of dimensions in Figure 1 has been changed; a new Table 1, Letter code for inductance values, has been added; dimensions for shapes in Table 2 and Table 5 have been added; new o
15、perating temperature ratings in Table 9 have been added. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-03-01 latest date by which the national standards conflicting wit
16、h the EN have to be withdrawn (dow) 2010-06-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62025-1:2007 was approved by CENELEC as a European Standard without any modification. _ EN 62025-1:2007 2 CONTENTS 1 Scope and object4 2 Normative refere
17、nces .4 3 Graphical symbols and designations.4 3.1 Designation .4 4 Shape.6 5 Dimensions 7 5.1 Shape D 7 5.2 Shape K 8 5.3 Tolerances for outline dimensions .8 6 Ratings and characteristics 9 6.1 Nominal inductance or impedance.9 6.2 Tolerance for nominal inductance or impedance9 6.3 Operating tempe
18、rature range.9 7 Marking 11 8 Direction marking or shape of polarity 11 Bibliography12 Table 1 Letter code for inductance value5 Table 2 Dimensions for shape D 7 Table 3 Dimensions of height for shape D (R 20 series).7Table 4 Dimensions of height for shape D less than 1,00 mm 8 Table 5 Dimensions fo
19、r shape K 8 Table 6 Tolerances for outline dimension and height9 Table 7 E 24 series for nominal inductance or impedance9 Table 8 Tolerance for nominal inductance or impedance9 Table 9 Temperatures to be selected for operating temperature ranges .10 Table 10 User reference / Examples of application
20、and operating temperature range.10 Figure 1 Shapes of inductor and ferrite beads (examples)6 Annex ZA (normative) Normative references to international publications with their corresponding European publications 13EN 62025-1:2007 3 HIGH FREQUENCY INDUCTIVE COMPONENTS NON-ELECTRICAL CHARACTERISTICS A
21、ND MEASURING METHODS Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment 1 Scope and object This part of IEC 62025 applies to fixed, surface mounted inductors and ferrite beads. Should conflict arise between these specifications and the detail specification
22、s, the latter will take precedence. The object of this standard is to establish requirements for fixed, surface mounted inductors, to describe terms, to give recommendations for standard values and dimensions and to give guidance on fixed, surface mounted inductors. 2 Normative references The follow
23、ing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61605: 2005, Fixed inductors for use in electronic and
24、telecommunication equipment- Marking codes 3 Graphical symbols and designations 3.1 Designation Designation of the fixed, surface mounted inductors is expressed by 12 digits. Designation of ferrite beads shall be specified in the detail specifications. a) b) c) d) e) a) Identification of the type of
25、 inductor: fixed, surface mounted inductors shall be identified by the three alphabetic characters LCL. b) Indication of outline dimensions: the outline dimensions of the surface mounted inductor shall be indicated by a four-digit number based on two significant figures for each dimension of L and W
26、 (or H). As for the dimensions of shape D, the first two digits indicate the longer side dimension L, and the last two digits indicate the shorter side dimension W, as shown in Figure 1. As for the dimensions of shape K, the first two digits indicate the outline dimension L, and the last two digits
27、indicate the height dimension H. c) Indication of shape: a single alphabetic character as given in Figure 1 indicates the shape for fixed, surface mounted inductors. EN 62025-1:2007 4 The shape codes are classified by the base shape of inductors. D: rectangular K: square d) Indication of nominal ind
28、uctance: Three alphanumeric characters specified in IEC 61605, Clause 4 indicate the nominal inductance value. Table 1 Letter code for inductance value Inductance values Digit and letter code 0,1 nH 0,47 nH 1 nH 4,7 nH 10 nH 47 nH 0,1 H 0,47 H 1 H 4,7 H 10 H 47 H 100 H 470 H 1 mH 4,7 mH 10 mH 47 mH
29、100 mH 470 mH 1 H 4,7 H 10 H 47 H N10 N47 1N0 4N7 10N 47N R10 R47 1R0 4R7 100 470 101 471 102 472 103 473 104 474 105 475 106 476 e) Indication of tolerance for inductance: Single alphabetic characters specified in Table 8 indicate the tolerance for the inductance value. EN 62025-1:2007 5 4 Shape Th
30、e shapes of fixed, surface mounted inductors and ferrite beads are classified as shown in the Figure 1. Shape D Shape K HL H WWL H W L H L L HL L LL H W L HIEC 624/07 Figure 1 Shapes of inductor and ferrite beads (examples) EN 62025-1:2007 6 5 Dimensions 5.1 Shape D a) Outline dimensions L (long sid
31、e) and W (short side) of shape D shall be chosen from the values marked with X in Table 2. These values have been selected from the R 20 series, but the values 0,315; 0,56 and 3,15 have been rounded off to 0,3; 0,6 and 3,2 respectively. 1,25 may be rounded off to 1,2. b) Dimensions of height greater
32、 than 1,00 mm shall be chosen from Table 3. These values are taken from the R 20 series where, however, the values 1,12; 2,24; 3,15 and 3,55 have been rounded off to 1,1; 1,2; 2,2; 3,2 and 3,6 respectively. 1,25 may be rounded off to 1,2. Dimensions of height, smaller than 1,00 mm shall be selected
33、from Table 4. Table 2 Dimensions for shape D Dimensions in millimetres W (short side) L (long side) 0,2 0,3 0,4 0,5 0,8 1,01,25 (1,2)1,6 1,8 2,0 2,5 3,2 4,0 5,0 5,6 6,3 7,10,4 X 0,6 X 0,8 X 1,0 X 1,2 X 1,6 X X 2,0 X X X 2,5 X X 3,2 X X X 4,0 4,5 X X X 5,0 X 5,6 X 6,3 X 7,1 X 8,0 X Table 3 Dimensions
34、 of height for shape D (R 20 series) Dimensions in millimetres 1,0 1,1 1,25 (1,2) 1,4 1,6 1,8 2,0 2,2 2,5 2,8 3,2 3,6 4,0 4,5 5,0 5,6 6,3 7,1 8,0 9,0 10,0 EN 62025-1:2007 7 Table 4 Dimensions of height for shape D less than 1,00 mm Dimensions in millimetres 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,85 0,9 5.2 S
35、hape K Outline dimensions L and H of shape K shall be chosen from the values marked with X in Table 5. These values are based on R 20 series. Table 5 Dimensions for shape K Dimensions in millimetres H (height) L (length) 0,6 0,8 0,9 1,0 1,1 1,2 1,4 1,6 1,8 2,0 2,2 2,5 3,2 4,0 4,5 5,0 6,3 7,1 8,0 9,0
36、2,5 X X X X 2,8 X X X X X 3,2 X X X X 3,6 X 4,0 X X X X X X X 4,5 X 5,0 X X X X X 5,6 X X 6,3 X 7,1 X 8,0 X X 9,0 X 10, X X 12,0 X 5.3 Tolerances for outline dimensions Tolerances for outline dimension and height shall be selected from Table 6. EN 62025-1:2007 8 Table 6 Tolerances for outline dimens
37、ion and height Tolerances mm Outline dimensions (X) mm Standard Maximum X 0,6 0,05 0,10 0,6 X 1,0 0,10 0,20 1,0 X 1,6 0,15 0,30 1,6 X 2,5 0,20 0,40 2,5 X 4,0 0,30 0,60 4,0 X 8,0 0,40 0,80 8,0 X 10,0 0,50 1,00 6 Ratings and characteristics 6.1 Nominal inductance or impedance The preferred values of n
38、ominal inductance or impedance shall be selected from the numeric values of the E 24 series in Table 7 and their decimal multiples or submultiples. The detail specification sheet should clearly note whether the value given is inductance or impedance, as well as the units and measuring frequency. The
39、 choice of specifying either inductance or impedance depends on the intended application for the inductor. Table 7 E 24 series for nominal inductance or impedance 1,0 1,1 1,2 1,3 1,5 1,6 1,8 2,0 2,2 2,4 2,7 3,0 3,3 3,6 3,9 4,3 4,7 5,1 5,6 6,2 6,8 7,5 8,2 9,1 6.2 Tolerance for nominal inductance or i
40、mpedance The tolerance for nominal inductance or impedance shall be selected from Table 8 which includes the tolerances specified in 4.1 of IEC 61605. Table 8 Tolerance for nominal inductance or impedance Tolerance 0,05 nH 0,1 nH 0,2 nH 0,3 nH 0,5 nH 1 % 2 % 3 % 5 % 10 % 15 % 20 % 25 % 30 % Letter c
41、ode W B C S D F G H J K L M - N NOTE 1 nH should be applied to inductance only. NOTE 2 25 % should be applied to impedance only. 6.3 Operating temperature range The operating temperature range shall be selected from a lower temperature and a higher temperature in Table 9. EN 62025-1:2007 9 Table 9 T
42、emperatures to be selected for operating temperature ranges Lower temperature C Higher temperature C 55 + 155 40 + 150 25 + 125 10 + 105 + 100 + 85 + 70 + 40 NOTE Unless otherwise specified, operating temperature is ambient temperature plus temperature rise of components. Table 10 User reference / E
43、xamples of application and operating temperature range Category applies Temperature range C Standard identification Automobile and aerospace 55 to + 155 55 to + 150 55 to + 125 40 to + 150 40 to + 125 Mil PRF 27 Class V IEC 62211 Level S - - AEC Q200 Grade 1 IEC 62211 Level A Telecommunication and p
44、ower supply 55 to + 105 55 to + 85 40 to + 125 40 to + 105 40 to + 85 Mil PRF 27 Class R Mil PRF 27 Class Q IEC 62211 Level B AEC Q200 Grade 2 IEC 62211 Level B AEC Q200 Grade 3 IEC 62211 Level B Consumer and commercial electronics 40 to + 85 25 to + 105 25 to + 100 25 to + 85 25 to + 70 0 to + 70 I
45、EC 62211 Level C AEC Q200 Grade 3 - - - IEC 62211 Level D AEC Q200 Grade 4 NOTE AEC Q200 and IEC 62211 are component-level reliability specifications. A distinction exists between component-level and system-level specifications. EN 62025-1:2007 10 7 Marking The selection of type(s) of marking inform
46、ation is subject to agreement between supplier and user. In lieu of such an agreement, the marking information should be as published in the suppliers data sheet. One or more of the following types of marking information is recommended on the body or the package: a) user part number; b) serial numbe
47、r, lot code or date code; c) characteristics as specified in IEC 61605; d) supplier part number and logo or mark; e) quantity (package only). 8 Direction marking or shape of polarity For the purpose of indicating the winding start location, or the first pin number, or first electrode, either a mark
48、or a shape should be used. A shape indicator is a corner cut, or small circle indent, or other molded feature that indicates polarity on the inductor (if such indication is necessary). EN 62025-1:2007 11 Bibliography IEC 62211, Inductive components Reliability management AEC Q200, Stress Test Qualification For Passive Components Mil PRF 27, General Specification fo
