1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58The European Standard EN 62317-1:2007 has the status of a British StandardICS 29.100.10Ferrite core
2、s Dimensions Part 1: General specificationBRITISH STANDARDBS EN 62317-1:2007BS EN 62317-1:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 September 2007 BSI 2007ISBN 978 0 580 57302 6Amendments issued since publicationAmd. No. Date Com
3、mentscontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard is the UK implementation of EN 62317-1:2007. It is identical to IEC 62317-1:2007The UK participation in its prepara
4、tion was entrusted to Technical Committee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a EUROPE
5、AN STANDARD EN 62317-1 NORME EUROPENNE EUROPISCHE NORM August 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC
6、- All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62317-1:2007 E ICS 29.100.10 English version Ferrite cores - Dimensions - Part 1: General specification (IEC 62317-1:2007) Noyaux en ferrite - Dimensions - Partie 1: Spcifications gnrales (C
7、EI 62317-1:2007) Ferritkerne - Mae - Teil 1: Allgemeine Festlegungen (IEC 62317-1:2007) This European Standard was approved by CENELEC on 2007-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the sta
8、tus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German)
9、. A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, C
10、yprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of docum
11、ent 51/874/CDV, future edition 1 of IEC 62317-1, prepared by IEC TC 51, Magnetic components and ferrite materials, was submitted to the IEC-CENELEC Parallel Unique Acceptance Procedure and was approved by CENELEC as EN 62317-1 on 2007-08-01. The following dates were fixed: latest date by which the E
12、N has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of
13、 the International Standard IEC 62317-1:2007 was approved by CENELEC as a European Standard without any modification. _ EN 62317-1:2007 2 FERRITE CORES DIMENSIONS Part 1: General specification 1 Scope This part of IEC 62317 specifies the standards and existing projects dealing with dimensions of fer
14、rite cores. It is intended that this standard will include ferrite cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industri
15、al name for each standard part should appear with the part within this series. It is intended that this standard will exclude ferrite cores which are specialty cores with limited use. Also, special cores which are only marginal variations upon standard cores are excluded. Examples: E24/25 (USA) and
16、E24,5 (Metric) are two similar parts, yet they are included separately in this series because they are national standards, widely used. E-187 (USA) and FEE19A (Japan) are two similar parts, yet they are included separately in this series because they are national standards, widely used. EP5 has smal
17、l dimensional differences when comparing different manufacturers, yet only one EP5 is shown in this series, because they are only minor variations on the single basic part. A ferrite core produced by only one or two suppliers may generally be considered a specialty part, and not suitable as a standa
18、rd core within this series. A ferrite core produced by three or more competing manufacturers may generally be considered to be a candidate to be included in this series. IEC publishes electrical standards for families of ferrite cores, as well as this series of dimensional standards for families of
19、ferrite cores. Modifications to the ferrite cores listed in one type of standard should be reflected in the other type. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated
20、references, the latest edition of the referenced document (including any amendments) applies. IEC 60133, Dimensions of pot-cores made of magnetic oxides and associated parts IEC 60647, Dimensions for magnetic oxide cores intended for use in power supplies (EC-cores) IEC 61185, Ferrite cores (ETD-cor
21、es) intended for use in power supply applications Dimensions EN 62317-1:2007 3 IEC 61247, PM-cores made of magnetic oxides and associated parts Dimensions IEC 61596, Magnetic oxide EP-cores and associated parts for use in inductors and transformers Dimensions IEC 62317-4, Ferrite cores Dimensions Pa
22、rt 4: RM-cores and associated parts IEC 62317-7, Ferrite cores Dimensions Part 7: EER-cores IEC 62317-8, Ferrite cores Dimensions Part 8: E-cores IEC 62317-9, Ferrite cores Dimensions Part 9: Planar cores IEC 62323, Dimensions of half pot-cores made of ferrite for inductive proximity switches IEC/TR
23、 61604, Dimensions of uncoated ring cores of magnetic oxides 3 Transition of existing publications and projects The standards that are to be included within the IEC 62317 series include existing standards, future standards already in development, and future standards that may be developed later. The
24、 new references should be recorded on the IEC web site as follows: a) for existing projects: the new project numbers should be recorded on the IEC web site at the time of circulation of next working drafts, with an explanatory note on the cover sheet; b) for existing publications: the publication nu
25、mbers should be updated at the time of each new revision of these standards. An explanatory note should be included in the foreword of future publications; c) for future new projects, the new project numbers should be selected to be consistent with the IEC 62317 series. A table showing existing proj
26、ect (or publication) references and the proposed new project (or publication) references is given in Table A.1. 4 Dimension descriptions Table 1 and Table 2 describe the alphabetic character assignments for the major dimensions of ferrite shapes. All other minor core dimension designations are left
27、to the discretion of the specifier. Table 1 Toroid core dimension designations Letter Dimension description A Toroid outside diameter B Toroid inside diameter C Toroid height EN 62317-1:2007 4 Table 2 Ferrite shape dimension designations Letter Dimension description A Overall length of the core back
28、 or diameter B Outside leg length or height of core C Core width or floor width at wire aperture D Inside leg length or available bobbin depth E Window width or available bobbin width F Centre post thickness or diameter G Wire aperture or slot width H Centre post hole diameter J RM core side-to-side
29、 parallel width K Centre post offset dimension S Slot width in outside legs T Distance between slot depths in outside legs 5 Locations and functions of core parts and surfaces (see Figure 1) 5.1 Mating surfaces These surfaces are generally ground in order to reduce the residual air gap between the t
30、wo core halves. Consequently, irregularities on these surfaces shall be considered as major ones, and carefully evaluated with regard to their influence on the magnetic properties of the complete circuit. 5.2 Centre post This should be considered as the most important part of the core due to its fun
31、ction of carrying the total flux generated by the winding. The centre post of ferrite cores is generally circular (with or without a hole) or rectangular. 5.3 Outer walls or legs The main function of the outer walls (e.g. pot-cores) or the outer legs (e.g. E-cores) is to guide the magnetic flux in a
32、 closed magnetic circuit. 5.4 Back wall, bottom and back surfaces The back wall has the same magnetic function as the outer walls or legs; it may include wire-slots and wire-way areas (e.g. on RM-cores), the shapes and dimensions of which are dictated by the winding and isolation requirements. Besid
33、es accommodating the clamping, the back surface (ground or not) serves as a reference plane for grinding the mating surface in order to achieve the required parallelism and flatness. 5.5 Wire-slot area Lateral area of the outer walls, interfacing with the cut-out portion. 5.6 Wire-way area This is l
34、ocated on the bottom (inside) surface of the back wall, running radially from the centre post to the wire-slot, centred with respect to the wire-slot. EN 62317-1:2007 5 It takes out the leads of the wound coil from inside to outside for termination. 5.7 Clamping recess area Recess area on the back w
35、all is to accommodate clamping clips. Wire-way areas (see 5.6) Bottom surface (see 5.4) Mating surfaces (see 5.1) Centre post (see 5.2) Wire-slot areas (see 5.5) Outer walls and legs (see 5.3) Back wall (see 5.4) Back surface (see 5.4) Clamping recess areas (see 5.7) IEC 1172/07 Figure 1 Location of
36、 main core parts and surfaces Example of RM-core type A table showing existing project (or publication) references and the proposed new project (or publication) references is given in Table A.1. EN 62317-1:2007 6 Annex A (informative) Original and new references and titles Table A.1 Original and new
37、 references and titles New standard Original standard IEC 62317-1, Ferrite cores Dimensions Part 1: General specification / IEC 62317-2, Ferrite cores Dimensions Part 2: Pot cores (future standard) IEC 60133 Ed.4: 2000 (current standard) IEC 62317-3, Ferrite cores Dimensions Part 3: Half pot cores (
38、future standard) IEC 62323 Ed.1 : 2005 (current standard) IEC 62317-4 : 2005, Ferrite cores Dimensions Part 4: RM-cores and associated parts IEC 60431 Ed.3 : 2005 (former standard) IEC 62317-5, Ferrite cores Dimensions Part 5: EP-cores (future standard) IEC 61596 Ed.1: 1995 (current standard) IEC 62
39、317-6, Ferrite cores Dimensions Part 6: ETD-cores (future standard) IEC 61185 Ed.2 : 2005 (current standard) IEC 62317-7 : 2005, Ferrite cores Dimensions Part 7: EER-cores / IEC 62317-8 : 2006, Ferrite cores Dimensions Part 8: E-cores IEC 61246 Ed.1.1, 2002 (former standard) IEC 62317-9 : 2006, Ferr
40、ite cores Dimensions Part 9: Planar cores IEC 61860 Ed.1, 2000 (former standard) IEC 62317-10, Ferrite cores Dimensions Part 10: PM-cores (future standard) IEC 61247 Ed.1, 1995 (current standard) IEC 62317-11, Ferrite cores Dimensions Part 11: EC-cores (future standard) IEC 60647 Ed.1, 1979 (current
41、 standard) IEC 62317-12, Ferrite cores Dimensions Part 12: Uncoated ring cores (future standard) IEC/TR 61604 Ed.1, 1997 (current standard) IEC 62317-13, Ferrite cores Dimensions Part 13: PQ-cores for use in power supply applications (future standard) / IEC 62317-14, Ferrite cores Dimensions Part 14
42、: EFD-cores for use in power supply applications (future standard) / _ EN 62317-1:2007 7 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. F
43、or dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication
44、 Year Title EN/HD Year IEC 60133 - 1)Dimensions of pot-cores made of magnetic oxides and associated parts EN 60133 2001 2)IEC 60647 - 1)Dimensions for magnetic oxide cores intended for use in power supplies (EC-cores) - - IEC 61185 - 1)Ferrite cores (ETD-cores) intended for use in power supply appli
45、cations - Dimensions EN 61185 2005 2)IEC 61247 - 1)PM-cores made of magnetic oxides and associated parts - Dimensions EN 61247 1997 2)IEC 61596 - 1)Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions EN 61596 1997 2)IEC 62317-4 - 1)Ferrite cores - Dimensio
46、ns - Part 4: RM-cores and associated parts EN 62317-4 2005 2)IEC 62317-7 - 1)Ferrite cores - Dimensions - Part 7: EER-cores EN 62317-7 2005 2)IEC 62317-8 - 1)Ferrite cores - Dimensions - Part 8: E-cores EN 62317-8 2006 2)IEC 62317-9 - 1)Ferrite cores - Dimensions - Part 9: Planar cores EN 62317-9 20
47、06 2)IEC 62323 - 1)Dimensions of half pot-cores made of ferrite for inductive proximity switches EN 62323 2005 2)IEC/TR 61604 - 1)Dimensions of uncoated ring cores of magnetic oxides - - 1)Undated reference. 2)Valid edition at date of issue. EN 62317-1:2007 8 blankBS EN BSI389 Chiswick High RoadLond
48、onW4 4AL62317-1:2007BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendmen
49、t or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found
