1、BSI Standards PublicationUniversal serial bus interfaces for data and powerPart 2: Universal serial bus Micro-USB cables and connectors specification, revision 1.01BS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo re
2、production or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62680-2:2013. It isidentical to IEC 62680-2:2013.The UK participation in its preparation was entrusted to Technical Commit-tee EPL/100, Audio, video and multimedia sy
3、stems and equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Publ
4、ished by BSI Standards Limited 2014ISBN 978 0 580 79854 2ICS 33.120; 35.200Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2014.Amendments /corrigenda
5、issued since publicationDate Text affectedBRITISH STANDARDBS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62680-2 NORME EUROPEN
6、NE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitati
7、on in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62680-2:2013 E ICS 33.120; 35.200 English version Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01 (IEC 62680-2:2013) In
8、terfaces de bus universel en srie pour les donnes et lalimentation lectrique - Partie 2: Bus universel en srie - Spcification des cbles et connecteurs micro-USB, rvision 1.01 (CEI 62680-2:2013) Schnittstellen des Universellen Seriellen Busses fr Daten und Energie - Teil 2: Festlegung fr USB-Mikro-US
9、B-Kabel und Steckverbinder (IEC 62680-2:2013) This European Standard was approved by CENELEC on 2013-10-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt
10、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other languag
11、e made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Cz
12、ech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United K
13、ingdom. BS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62680-2:2013 - 2 - Foreword The text of document 100/2153/FDIS, future edition 1 of IEC 6
14、2680-2, prepared by IEC/TC 100, “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62680-2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an
15、 identical national standard or by endorsement (dop) 2014-07-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELE
16、C and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62680-2:2013 was approved by CENELEC as a European Standard without any modification. BS EN 62680-2:2013Copyright British Standards Institution Prov
17、ided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 4 62680-2 IEC:2013 USB-IF:2006 INTRODUCTION The IEC 62680 series is based on a series of specifications that were originally developed by the USB Implementers Fo
18、rum (USB-IF). These specifications were submitted to the IEC under the auspices of a special agreement between the IEC and the USB-IF. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the Universal Serial Bus specification. The USB
19、-IF was formed to provide a support organization and forum for the advancement and adoption of Universal Serial Bus technology. The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and the quality of products that have passed co
20、mpliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUD
21、ING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. E
22、ntering into USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal, royalty-free licensing arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/developers/devclass_docs#approved IEC DOES NOT
23、TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS FORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the following parts: IEC 62680-1, Universal Serial Bus interfa
24、ces for data and power Part 1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2, Universal Serial Bus interfaces for data and power Part 2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 IEC 62680-3, Universal Serial Bus interfaces for data and power Part 3: USB Battery
25、 Charging Specification, Revision 1.2 IEC 62680-4, Universal Serial Bus interfaces for data and power Part 4: Universal Serial Bus Cables and Connectors Class Document Revision. 2.0 This part of the IEC 62680 series consists of several distinct parts: the main body of the text, which consists of the
26、 original specification and all ECN and Errata developed by the USB-IF. BS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-62680-2 IEC:2013 5 USB-IF:20
27、06 CONTENTS 1 Introduction 10 1.1 General . 10 1.2 Objective of the Specification 10 1.3 Intended Audience/Scope 10 1.4 Related Documents . 10 2 Acronyms and Terms 10 3 Significant Features 11 3.1 USB 2.0 Specification Compliance 11 3.2 On-The-Go Device 11 3.3 Connectors 11 3.4 Compliant Cable Assem
28、blies . 12 3.5 Plug Overmolds . 12 4 Cables and Connectors 12 4.1 Introduction . 12 4.2 Micro-Connector Mating 12 4.3 Color Coding . 13 4.4 Device, Cable and Adapter Delays 13 4.5 Compliant Usage of Connectors and Cables 14 4.5.1 Cables . 14 4.5.2 Overmolds . 14 4.5.3 Mechanical Interfaces 14 4.5.4
29、Surface mount standard version drawings . 14 4.5.5 DIP-type and Midmount-type receptacles . 14 4.5.6 Connector Keying 15 4.5.7 Right Angle Plugs 15 4.5.8 Adapters 15 4.6 Drawings . 15 5 Electrical Compliance Requirements 34 5.1 Data Rates Beyond USB 2.0 (480Mb/s ) . 35 5.2 Low Level Contact Resistan
30、ce . 35 5.3 Contact Current Rating 35 5.3.1 Signal Contacts Only (2, 3, and 4) . 35 5.3.2 With Power Applied Contacts (1 and 5) 35 6 Mechanical Compliance Requirements . 35 6.1 Operating Temperature Range 35 6.1.1 Option I . 35 Option II 35 6.2 Insertion Force 35 6.3 Extraction Force 35 6.4 Plating
31、. 35 6.4.1 Option I . 36 6.4.2 Option II 36 6.5 Solderability 36 6.6 Peel Strength (Reference Only) . 36 6.7 Wrenching Strength (Reference Only) . 36 6.8 Lead Co-Planarity . 36 6.9 RoHS Compliance . 36 BS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under license with BSI -
32、 Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 62680-2 IEC:2013 USB-IF:2006 6.10 Shell edited three pictures (Figure 4-10, 4-11 and 4-12). 1.03RC 12/11/2006 Two pictures edited (Figure 4-8 and 4-9). In fig 4-8 max height to be 2.8mm MAX. In f
33、ig 4-9 R0.25mm MAX to be R0.30mm MAX. 1.0RC3 12/19/2006 For BoD approval 1.0 1/12/2007 Approved 1.0 1/22/2007 Cosmetic edits for publication 1.01 4/4/2007 Editorial corrections and additions to contributor list. Reinserted shell and plug material requirements as section 6.10. Clarified wording on Pl
34、ating Recommendations. Copyright 2006 USB Implementers Forum, Inc. (USB-IF). All rights reserved. BS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8
35、 62680-2 IEC:2013 USB-IF:2006 A LICENSE IS HEREBY GRANTED TO REPRODUCE THIS SPECIFICATION FOR INTERNAL USE ONLY. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED OR INTENDED HEREBY. USB-IF AND THE AUTHORS OF THIS SPECIFICATION EXPRESSLY DISCLAIM ALL LIABILITY FOR INFRINGEME
36、NT OF INTELLECTUAL PROPERTY RIGHTS, RELATING TO IMPLEMENTATION OF INFORMATION IN THIS SPECIFICATION. USB-IF AND THE AUTHORS OF THIS SPECIFICATION ALSO DO NOT WARRANT OR REPRESENT THAT SUCH IMPLEMENTATION(S) WILL NOT INFRINGE THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. THIS SPECIFICATION IS PROVIDED
37、“AS IS“ AND WITH NO WARRANTIES, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE. ALL WARRANTIES ARE EXPRESSLY DISCLAIMED. NO WARRANTY OF MERCHANTABILITY, NO WARRANTY OF NON-INFRINGEMENT, NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, AND NO WARRANTY ARISING OUT OF ANY PROPOSAL, SPECIFICATION, OR SAMP
38、LE. IN NO EVENT WILL USB-IF OR USB-IF MEMBERS BE LIABLE TO ANOTHER FOR THE COST OF PROCURING SUBSTITUTE GOODS OR SERVICES, LOST PROFITS, LOSS OF USE, LOSS OF DATA OR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES, WHETHER UNDER CONTRACT, TORT, WARRANTY, OR OTHERWISE, ARISING IN ANY WAY
39、OUT OF THE USE OF THIS SPECIFICATION, WHETHER OR NOT SUCH PARTY HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. All product names are trademarks, registered trademarks, or service marks of their respective owners. BS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under
40、 license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-62680-2 IEC:2013 9 USB-IF:2006 Contributors Mark Rodda, (editor) Motorola Yoichi Nakazawa, JST Jan Fahllund, (editor) Nokia Kevin Fang, Longwell Electronics Jim Koser, (CCWG Chair
41、man), Foxconn Morgan Jair, Main Super Co. Ed Beeman, 2010 Tech Tom Kawaguchi, Matsushita Electric Works Glen Chandler, Advanced-Connectek (Acon) Ron Ward, Matsushita Electric Works Charles Wang, Advanced-Connectek (Acon) Satoshi Yamamoto, Matsushita Electric Works Toshinori Sasaki, Across Techno Yas
42、uhiko Shinohara, Mitsumi Minoru Ohara, Allion Atsushi Nishio, Mitsumi Brad Brown, ATL Hitoshi Kawamura, Mitsumi Christopher Mattson, ATL Scott Sommers, Molex Marcus Darrington, ATL Kevin Delaney, Molex Jaremy Flake, ATL Technology Kieran Wright, Molex George Olear, Contech Research Padraig McDaid, M
43、olex Roy Ting, Elka Mikko Poikselka, Molex Sophia Liu, ETC Sam Liu, Newnex Technology Corp. Bill Northey, FCI Richard Petrie, Nokia Tsuneki Watanabe, Foxconn Kai Silvennoinen, Nokia Jim Zhao, Foxconn Panu Ylihaavisto, Nokia David Ko, Foxconn Arthur Zarnowitz, Palm Jong Tseng, Foxconn Douglas Riemer,
44、 SMK Jack Lu, Foxlink Eric Yagi, SMK Tim Chang, Foxlink Abid Hussain, Summit Microelectronics Sathid Inthon, Fujikura Kaz Osada, Tyco Toshi Mimura, Fujijura Masaru Ueno, Tyco Alan Berkema, Hewlett-Packard Yoshikazu Hirata, Tyco Karl Kwiat, Hirose Mark Paxson, VTM Inc. Shinya Tono, Hirose Kazu Ichika
45、wa, Hirose Ryozo Koyama, Hirose Yousuke Takeuchi, Hirose Tsuyoshi Kitagawa, Hosiden Jim Eilers, Hosiden Kazuhiro Saito, JAE Ron Muir, JAE Mark Saubert, JAE Yasuhira Miya, JST Takahiro Diguchi, JST BS EN 62680-2:2013Copyright British Standards Institution Provided by IHS under license with BSI - Unco
46、ntrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 10 62680-2 IEC:2013 USB-IF:2006 1 Introduction 1.1 General USB has become a popular interface for exchanging data between cell phone and portable devices. Many of these devices have become so small it i
47、s impossible to use standard USB components as defined in the USB 2.0 specification. In addition the durability requirements of the Cell Phone and Portable Devices market exceed the specifications of the current interconnects. Since Cell Phones and other small Portable Devices are the largest market
48、 potential for USB, this specification is addressing this very large market while meeting all the requirements for electrical performance within the USB 2.0 specification. 1.2 Objective of the Specification The purpose of this document is to define the requirements and features of a Micro-USB connector that will meet the current and future needs of the Cell Phone and Portable Devices markets, while conforming to the USB 2.0 specification for performance, physical size and shape of the Micro-USB interconnect. This is not a stand-alone docu
