1、BSI Standards PublicationBS EN ISO 10297:2014Gas cylinders Cylinder valves Specification and typetesting (ISO 10297:2014)BS EN ISO 10297:2014Incorporating corrigendum November 2014BS EN ISO 10297:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 10297:201
2、4. It supersedes BS EN ISO 10297:2006 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee PVE/3, Gas containers, to Subcommittee PVE/3/1, Valve fittings for gas containers.A list of organizations represented on this subcommittee can be obtained on request
3、to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 88990 5ICS 23.020.30; 23.060.40Compliance with a
4、British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2014.Amendments/corrigenda issued since publicationDate Text affected30 November 2014 CEN Correction Notice 29 October
5、 2014 implements ISO corrected text 1 November 2014: titles added to Figures 5 and 6EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10297 July 2014 ICS 23.060.40; 23.020.30 Supersedes EN ISO 10297:2006English Version Gas cylinders - Cylinder valves - Specification and type testing (ISO 1029
6、7:2014) Bouteilles gaz - Robinets de bouteilles - Spcifications et essais de type (ISO 10297:2014) Gasflaschen - Flaschenventile - Spezifikation und Baumusterprfungen (ISO 10297:2014) This European Standard was approved by CEN on 28 June 2014. CEN members are bound to comply with the CEN/CENELEC Int
7、ernal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to an
8、y CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official v
9、ersions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa
10、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploi
11、tation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10297:2014 EBS EN ISO 10297:2014EN ISO 10297:2014 (E) 3 Foreword This document (EN ISO 10297:2014) has been prepared by Technical Committee ISO/TC 58 “Gas cylinders” in collaboration with Technical Commi
12、ttee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be with
13、drawn at the latest by January 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10297:2006. Accor
14、ding to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
15、 Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10297:2014 has been approved by CEN as EN ISO 10297:2014
16、without any modification. BS EN ISO 10297:2014EN ISO 10297:2014 (E) 3 Foreword This document (EN ISO 10297:2014) has been prepared by Technical Committee ISO/TC 58 “Gas cylinders” in collaboration with Technical Committee CEN/ C 23 “Transportable gas cylinders” the secretariat of which is held by BS
17、I. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be ithdrawn at the latest by January 2015. Attention is drawn to the possibility that some
18、 of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10297:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations o
19、f the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Net
20、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10297:2014 has been approved by CEN as EN ISO 10297:2014 without any modification. BS EN ISO 10297:2014EN ISO 10297:2014 (E) 3 Foreword This
21、document (EN ISO 10297:2014) has been prepared by Technical Committee ISO/TC 58 “Gas cylinders” in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either b
22、y publication of an identical text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at the latest by January 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or C
23、ENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10297:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, B
24、elgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit
25、zerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10297:2014 has been approved by CEN as EN ISO 10297:2014 without any modification. ISO 10297:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction vii1 Scope . 12 Normative references 13 Terms, definiti
26、ons and symbols 24 Valve description 65 Valve design requirements .115.1 General 115.2 Materials 125.3 Dimensions 125.4 Valve connections 135.5 Mechanical strength 145.6 Valve operating mechanism 145.7 Valve operating device . 175.8 Leakage . 175.9 Resistance to ignition . 176 Type testing.186.1 Gen
27、eral 186.2 Documentation 206.3 Test samples . 206.4 Test report 206.5 Test temperatures . 216.6 Test pressures . 216.7 Test gases 216.8 Test schedule . 226.9 Hydraulic burst pressure test 246.10 Flame impingement test 256.11 Excessive torque tests 256.12 Leak tightness tests 256.13 Endurance test .
28、276.14 Visual examination . 287 Marking .28Annex A (normative) Impact test 30Annex B (normative) Tests for acetylene valves 32Annex C (normative) Oxygen pressure surge test .33Annex D (informative) Example of test schedule 37Annex E (informative) Example of a vacuum test .38Annex F (normative) Endur
29、ance test machine 39Bibliography .41BS EN ISO 10297:2014ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.
30、 Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Interna
31、tional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the differ
32、ent types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be
33、 held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information g
34、iven for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT), see the follo
35、wing URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 58, Gas cylinders, Subcommittee SC 2, Cylinder fittings.This third edition cancels and replaces the second edition (ISO 10297:2006), which has been technically revised.The main technical modifications
36、 are:a) Scope: inclusion of main valves and valves with integrated pressure regulator (VIPR), exclusion ofquick-release valves, non-return valves and ball valves;b) Terms, definitions and symbols: introduction of new definitions and adaptation of existingdefinitions;c) Valve description: new clause
37、with figures and general description;d) Valve design requirements:1) General: inclusion of additional requirement of internal leak tightness at 40 C during transportand storage;2) Materials: deletion of requirements already given in ISO 11114-1 and ISO 11114-2; deletion ofageing sensitivity test for
38、 non-metallic materials; addition of requirement on ductility of valvebody material; addition of requirement on suitability of lubricants for valve test pressure;3) Dimensions: deletion of requirement on bore of the valve with regard to flow requirement andadaption of requirements for valves fitted
39、with a valve protection cap according to ISO 11117;4) Valve connections: addition of requirements for separate valve filling connection;5) Resistance to mechanical impact: addition of requirement for impact testing valves protectedby a valve guard but fixed only to the valve, modification of accepta
40、nce criteria;ISO 10297:2014(E) iv ISO 2014 All rights reservedBS EN ISO 10297:2014ISO 10297:2014(E)6) Valve operating mechanism: inclusion of allowance to increase the endurance torque for somevalve designs and to adjust compressed packed valves during endurance testing; replacement ofacetylene flas
41、hback test by alternative tests without using acetylene and addition of acetylenedecomposition test for main valves; modification of acceptance criteria;7) Valve operating device: addition of requirement on the handwheel diameter required to achievethe minimum closing torque; modification of accepta
42、nce criteria for flame impingement test;8) Resistance to ignition: addition of requirement of oxygen pressure surge testing for certaincylinder valves for gas mixtures containing oxygen and other oxidizing gases and of detailedinformation on acceptance criteria; addition of mandatory reference to ox
43、ygen pressure surgetest for VIPR specified in ISO 22435 or ISO 10524-3 and for cylinder valves with residualpressure devices specified in ISO 15996;e) Production requirements: deletion of all respective requirements but reference to ISO 14246 inscope;f) Type testing:1) General: addition of requireme
44、nts for repeating tests depending on applied changes for a valvedesign;2) Documentation: addition of detailed information on documentation required;3) Test samples: addition of requirement to have pressure gauges/indicators fitted;4) Test report: addition of detailed information required;5) Test pre
45、ssures: adaption of information on burst test pressure (former hydraulic test pressure);6) Test gas: addition of requirement for using helium or hydrogen or an inert mixture of thesegases for the leak tightness tests for cylinder valves for helium and hydrogen and their mixtures;extension of require
46、ments on gas quality;7) Test schedule: deletion of ageing as preconditioning and leak tightness test before ageing;addition of internal leak tightness test at 40 C after endurance test; adaption of oxygenpressure surge test for cylinder valves with lubricants not rated for valve test pressure; listi
47、ngof impact test;8) Hydraulic burst pressure test: addition of testing the valve in closed position;9) Excessive torque tests: addition of requirement to carry out the test with the valve operatingdevice in place; differentiation between handwheel and key/toggle operated valves; extensionof tests wi
48、th requirement of two additional test samples;10) Leak tightness tests: reference to informative Annex E for an example of a vacuum test;unification of the lower test pressure of 0,5 bar for all gases; implementation of internal leaktightness test at 40 C; addition of information on required positio
49、n of the valve operatingmechanism for external leak tightness test; adaption of requirement for test order for allrequired test pressures; adaption of requirement for changing and maintaining the differenttest temperatures; adaption of requirement for minimum closing torque;11) Endurance test: addition of requirement to carry out the test with the handwheel in place andof description of procedure for increasing the endurance torque for some valve designs;12) Visual examination: addition of separate sub-clause for visual examination with detailedinformation o
