1、BRITISH STANDARD e Industrial automation systems and integration - Product data representation and exchange - e a Part 210: Application protocol: Electronic assembly, interconnection, and packaging design BS EN IS0 10303-210: 2002 The European Standard EN IS0 10303-210:2002 has the status of a Briti
2、sh Standard ICS 25.040.40 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW British Standards BS EN IS0 10303-210:2002 Amd. No. National foreword Date Comments This British Standard is the official English language version of EN IS0 10303-210:2002. It is identical with IS0 10303
3、-210:2001. The UK participation in its preparation was entrusted to Technical Committee AMT/4, Advanced manufacturing technology - Product data exchange, which has the responsibility to: - - aid enquirers to understand the text; present to the responsible internationaUEuropean committee any enquirie
4、s on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The Briti
5、sh Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search facility of the BSI Electronic Catalogue or of British Standards Onlin
6、e. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard, having Summary of pages been prepared un
7、der the direction Of the was published under the authority of the Standards This document comprises a front cover, an insi-,: front cover, the EN IS0 title page, the EN IS0 foreword page, the IS0 title page, pages ii to xxii, pages 1 to 1000, an inside back cover and a back cover. and Strategy Commi
8、ttee The BSI copyright date displayed in this document indicates when the document was last issued. on 7 November 2002 Q BSI 7 November 2002 ISBN 0 580 40692 X EUROPEAN STANDARD NORME EUROPEENNE EUROPAISCHE NORM 0 EN IS0 10303=210 September 2002 ICS 25.040.40 English version Industrial automation sy
9、stems and integration - Product data representation and exchange - Part 21 0: Application protocol: Electronic assembly, interconnection, and packaging design (IS0 10303-210:2001) Systbmes dautomatisation industrielle et integration - Representation et Bchange de donnees de produits - Partie 21 0: P
10、rotocole dapplication: lnterconnexions Blectroniques, assemblage, et conception demballage (IS0 10303- 0 210:2001) lndustrielle Automatisierungssysteme und Integration - Produktdatendarstellung und -austausch - Teil210: Anwendungsprotokoll: Elektronische Montage, Verbindung und Gestaltung (IS0 10303
11、-21 0:2001) This European Standard was approved by CEN on 12 July 2002. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph
12、ical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN m
13、ember into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norwa
14、y, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITIEE FOR STANDARDIZATION COMITB EUROPCEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 0 2002 CEN All rights of exploitation in any form and by any means reserved worl
15、dwide for CEN national Members. Ref. No. EN IS0 10303-21 0:2002 E EN IS0 10303-210:2002 Foreword The text of IS0 10303-21 0:2001 has been prepared by Technical Committee lSO/TC 184 “Industrial automation systems and integration“ of the International Organization for Standardization (ISO) and has bee
16、n taken over as EN IS0 10303-21 0:2002 by Technical Committee CEN/TC 31 0 “Advanced Manufacturing Technologies“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the late
17、st by March 2003, and conflicting national standards shall be withdrawn at the latest by March 2003. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denm
18、ark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard IS0 10303-21 0:2001 has been approved by CEN as a European Standard without a
19、ny modifications. Reference numberISO 10303-210:2001(E)ISO 2001INTERNATIONALSTANDARDISO10303-210First edition2001-05-15Industrial automation systems andintegration Product data representationand exchange Part 210:Application protocol: Electronic assembly,interconnection, and packaging designSystmes
20、dautomatisation industrielle et intgration Reprsentation etchange de donnes de produits Partie 210: Protocole dapplication: Interconnexions lectroniques,assemblage, et conception demballageISO 10303-210:2001(E)PDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobes lice
21、nsing policy, this file may be printed or viewed but shall notbe edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thisfile, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO
22、Central Secretariat accepts no liability in thisarea.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameterswere optimized for printing. Every care has been tak
23、en to ensure that the file is suitable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2001All rights reserved. Unless otherwise specified, no part of this publication may be reproduced o
24、r utilized in any form or by any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member bodyin the country of the requester.ISO copyright officeCase postale 56 Gb7 CH-1211 Geneva 20Tel. + 41 22 749 01 11
25、Fax + 41 22 749 09 47E-mail copyrightiso.chWeb www.iso.chPrinted in Switzerlandii ISO 2001 All rights reservedISO 10303-210:2001(E)Contents Page1 Scope . . . . 12 Normative references . . . . . . . . 33 Terms, definitions, and abbreviations . . . . . . 63.1 Terms defined in IEC 60050-541 . . . . . .
26、 . . . . . . . . . . . . . . . . . . . . . . . 63.2 Terms defined in ISO 129 63.3 Terms defined in ISO 1101 . . . . . . 63.4 Terms defined in ISO 2692 . . . . . . 73.5 Terms defined in ISO 2692: Amendment 1 . . . . . . . . . . . . . . . . . . . . . . . 73.6 Terms defined in ISO 5459 . . . . . . 73.7
27、 Terms defined in ISO 8015 . . . . . . 73.8 Terms defined in ISO 10303-1 73.9 Terms defined in ISO 10303-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83.10 Terms defined in ISO 10303-44 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83.11 Terms defined in ISO 10303-45 . .
28、. . . . . . . . . . . . . . . . . . . . . . . . . . . 93.12 Terms defined in ISO 10303-46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93.13 Other definitions . 93.14 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Information requirements
29、 134.1 Units of functionality. 134.2 Application objects 854.3 Application assertions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6895 Application interpreted model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8575.1 Mapping table . .8575.2 AIM EXPRESS short list
30、ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20826 Conformance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29736.1 Device Functional and Physical Characterization . . . . . . . . . . . . . . . . 29766.2 Interconnect Technology Constraints .
31、 . . . . . . . . . . . . . . . . . . . . . . . . . . 29856.3 Assembly Technology Constraints . . . . . . . . . . . . . . . . . . . . . . . . 29946.4 Assembly Functional Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 30026.5 Assembly Physical Requirements . . . .30116.6 Interconne
32、ct Functional Requirements 30196.7 Interconnect Physical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 30276.8 Assembly Physical Design . . . . . . . . . . . .30366.9 Interconnect Design . . . . . . . . . . . . . . . . . . . . . . .30466.10 Interconnect Design (Microwave) . . .
33、. . . . . . . . . . . . . . . . . . . . . . . . . 30586.11 Geometric Dimensioning and Tolerancing . . . . . . . . . . . . . . . . . . . . . . . . 30706.12 Product Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30796.13 Functional Decomposition 30826.14 Package Fun
34、ctional and Physical Characterization . . . . . . . . . . . . . . . . . . . . 30896.15 Geometrically Bounded Surface Model . . . . . 3097c ISO 2001 All rights reserved iiiISO 10303-210:2001(E)6.16 Wireframe Model With Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30986.17 Advanced
35、 Boundary Representation . . . . . . . . . . . . . . . . . . . . . . . . . . . 30996.18 Constructive Solid Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31006.19 Extruded Solid . . 31016.20 Geometrically Bounded 2d Wireframe Model . . . . . . . . . .31016.21 Wireframe 2d Mod
36、el With Topology . . . . . . . . . . . . . . .31026.22 Curve 2d .31026.23 Basic Curve 2d . . 31026.24 Laminate Assembly Design . . . . . . .31036.25 Connection Zone Based Model Extraction . . . . . . . . . . . . . . . . . . . . . . . . 31086.26 Functional Specification . . . . . . . . . . . . . . .
37、. . . . . . . . . . . . . . . . . . 31116.27 Physical Unit Physical Characterization . . . . . . . . . . . . . . . . . . . . . . . . . 31156.28 Packaged Part White Box Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31236.29 Printed Part Functional and Physical Characterization . . .
38、 . . . . . . .31326.30 Open Shell Model 31406.31 Assembly Functional Interface Requirements . . . . . . . . . . . . . . . . . . . . . . 31406.32 Assembly Physical Interface Requirements . . . . . . . . . . . . . . .31456.33 Assembly Requirement Allocation . . . . . . . . . . . . . . . . . . . . . .
39、. . . . . . 31526.34 Interconnect Requirement Allocation . . . . . . . . . . . . . . . . . . . . . . . . . . 31596.35 Functional Requirement Allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . 31666.36 Product Requirement Allocation . . . . . . . . . . . . . . . . . . . . . . . . . . .
40、. . 31686.37 Datum Difference Based Model Definition . . . . . . . . . . . . . . . . . . . . . . . 31716.38 Datum Difference Based Characteristic .31746.39 Design Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3177Annex A (normative) AIM EXPRESS expanded listing . .
41、 . . . . . . . . . . . . . . . . . . 3183Annex B (normative) Short names of entities . . . . . . . . . . . . . . . . . . . . . . . . . . 3674Annex C (normative) Implementation method specific requirements . . . . . 3691Annex D (normative) Protocol Implementation Conformance Statement (PICS) proforma
42、 . . 3692Annex E (normative) Information object registration . . . . . . . . . . . . . 3695E.1 Document identification . 3695E.2 Schema identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3695Annex F (normative) Application interpreted constructs . . . . . . . . . .
43、. . . . . . . . . . 3696F.1 Geometrically bounded surface 3696F.2 Manifold surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3714Annex G (informative) Application activity model . . . . . . . . . . . . . . . . 3731G.1 Application activity model definitions . . . . . .
44、 . . . . . . . . . . . . . . . . . . . . 3731G.2 Application activity model figures . . 3751Annex H (informative) Application reference model . . . . . . . . . . . . . . . . . . . . . . . 3773H.1 EXPRESS . . . . .3773H.2 EXPRESS-G . . .3922iv c ISO 2001 All rights reservedISO 10303-210:2001(E)Figure
45、s1 Data planning model . xxi2 Altered_package . . . 893 Analytical_model of a resistor . . . . . . 934 Array_placement_group . . . . . . . . . . . . . . . . . . . . .1045 Assembled_with_bonding . . . . . . . . . . . . . .1056 Assembled_with_fasteners . . 1067 Assembly_component . . . . . . . . . . .
46、 . . . . . . . . . . . . . . . . . . . . . . . . . . 1108 Assembly_joint . . . . 1149 Assembly_module_usage_view . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12210 Bevel_edge_feature_shape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13111 Blind_via . . .13312 Fabri
47、cation drawing detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13913 Alternative functions for Bounding_Curve . .14014 Buried_via .14115 Component_termination_passage role in an assembly . . . . . . . . . . . . . . . . . . . . 18016 Component_termination_passage cross-sect
48、ion view . . . . . . 18017 Component_termination_passage_template terminals . . . . . . . . . . . . 18618 Partially exploded view of a Conductor . . . . . . . . . . . . . . . . . . . . . . . . 19919 Conductor . . . . . . .20420 Contact_size_dependent_land . 21721 Square corners with extend . . 22222
49、 Corners with positive extend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22323 Square corners with truncate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22324 Round corners .22425 Curve end treatment . . . . . . . . 22426 Completed curve . . .22527 Cutout plan view showing installed component . . . . . . . . . . . . . . . . . . . . . . . 22928 Cutout cross-section view showing installed component . . . . . . . . . . . . . . . 22929 Cutout
