BS EN ISO 6149-4-2017 Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions design test methods and requirements.pdf

上传人:花仙子 文档编号:582005 上传时间:2018-12-15 格式:PDF 页数:20 大小:1.93MB
下载 相关 举报
BS EN ISO 6149-4-2017 Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions design test methods and requirements.pdf_第1页
第1页 / 共20页
BS EN ISO 6149-4-2017 Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions design test methods and requirements.pdf_第2页
第2页 / 共20页
BS EN ISO 6149-4-2017 Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions design test methods and requirements.pdf_第3页
第3页 / 共20页
BS EN ISO 6149-4-2017 Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions design test methods and requirements.pdf_第4页
第4页 / 共20页
BS EN ISO 6149-4-2017 Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Dimensions design test methods and requirements.pdf_第5页
第5页 / 共20页
亲,该文档总共20页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealingPart 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017)BS EN ISO 6149-4:2017BSI Standards PublicationWB11885_BSI_StandardCo

2、vs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6149-4 September 2017 ICS 23.100.40 Supersedes EN ISO 6149-4:2014English Version Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing -Part 4: Dimens

3、ions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) Raccordements pour transmissions hydrauliques et applications gnrales - Orifices et lments mles filetage mtrique ISO 261 et joint torique - Partie 4: Dimensions, conception, mthodes dessai et e

4、xigences des bouchons dorifice six pans externes et six pans internes (ISO 6149-4:2017) This European Standard was approved by CEN on 7 September 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the statu

5、s of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Ger

6、man). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croati

7、a, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

8、 and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref

9、. No. EN ISO 6149-4:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 6149-4:2017. It is identical to ISO 6149-4:2017. It supersedes BS EN ISO 6149-4:2014, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/18/-/4, Connec

10、tors and associated components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Instituti

11、on 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 94276 1ICS 23.100.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corr

12、igenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 6149-4:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 6149-4 September 2017 ICS 23.100.40 Supersedes EN ISO 6149-4:2014English Version Connections for fluid power and general use - Ports and stud ends with ISO 2

13、61 metric threads and O-ring sealing -Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs (ISO 6149-4:2017) Raccordements pour transmissions hydrauliques et applications gnrales - Orifices et lments mles filetage mtrique ISO 261 et joint torique - P

14、artie 4: Dimensions, conception, mthodes dessai et exigences des bouchons dorifice six pans externes et six pans internes (ISO 6149-4:2017) This European Standard was approved by CEN on 7 September 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co

15、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exi

16、sts in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national st

17、andards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Sl

18、ovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any me

19、ans reserved worldwide for CEN national Members. Ref. No. EN ISO 6149-4:2017 EBS EN ISO 6149-4:2017EN ISO 6149-4:2017 (E) 3 European foreword This document (EN ISO 6149-4:2017) has been prepared by Technical Committee ISO/TC 131 “Fluid power systems” in collaboration with Technical Committee ECISS/T

20、C 110 “Steel tubes, and iron and steel fittings” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2018 and conflicting national standards shall be wit

21、hdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 6149-4:2014. According to the CEN

22、-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungar

23、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 6149-4:2017 has been approved by CEN as EN ISO 6149-4:2017 witho

24、ut any modification. ISO 6149-4:2017(E)Foreword ivIntroduction v1 Scope .12 Normative references 13 Terms and definitions .24 Dimensions .24.1 Plug dimensions . 24.2 Hex tolerances . 24.3 Screw threads. 25 Requirements 25.1 Working pressures and working temperatures 25.2 Performance 36 O-rings . 37

25、Test methods . 38 Designation of port plugs 39 Identification 310 Manufacture 410.1 Construction 410.2 Workmanship . 410.3 Finish . 411 Procurement information .412 Marking 413 Identification statement (reference to this document) .4Bibliography .10 ISO 2017 All rights reserved iiiContents PageBS EN

26、 ISO 6149-4:2017ISO 6149-4:2017(E)Foreword ivIntroduction v1 Scope .12 Normative references 13 Terms and definitions .24 Dimensions .24.1 Plug dimensions . 24.2 Hex tolerances . 24.3 Screw threads. 25 Requirements 25.1 Working pressures and working temperatures 25.2 Performance 36 O-rings . 37 Test

27、methods . 38 Designation of port plugs 39 Identification 310 Manufacture 410.1 Construction 410.2 Workmanship . 410.3 Finish . 411 Procurement information .412 Marking 413 Identification statement (reference to this document) .4Bibliography .10 ISO 2017 All rights reserved iiiContents PageBS EN ISO

28、6149-4:2017ISO 6149-4:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body intereste

29、d in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Com

30、mission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents

31、should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible

32、for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for

33、the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in

34、 the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by ISO/TC 131, Fluid power systems, SC 4, Connectors and similar products and components.This second edition cancels and replaces the first edition (ISO 6149-4:2006), of which

35、it constitutes a minor revision.The main change since last version is the addition of a warning statement about the hazards of intermixing of stud ends with the various port types.iv ISO 2017 All rights reservedBS EN ISO 6149-4:2017ISO 6149-4:2017(E)ForewordISO (the International Organization for St

36、andardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the rig

37、ht to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures

38、 used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rul

39、es of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights ide

40、ntified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanat

41、ion on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ is

42、o/ foreword .html.This document was prepared by ISO/TC 131, Fluid power systems, SC 4, Connectors and similar products and components.This second edition cancels and replaces the first edition (ISO 6149-4:2006), of which it constitutes a minor revision.The main change since last version is the addit

43、ion of a warning statement about the hazards of intermixing of stud ends with the various port types.iv ISO 2017 All rights reserved ISO 6149-4:2017(E)IntroductionIn fluid power systems, power is transmitted and controlled through a fluid (liquid or gas) under pressure within an enclosed circuit. In

44、 general applications, a fluid can be conveyed under pressure.Components are connected through their threaded ports by stud ends on fluid conductor connectors to tubes and pipes or to hose fittings and hoses. Fluid ports are closed by inserting a plug in the port. ISO 2017 All rights reserved vBS EN

45、 ISO 6149-4:2017Connections for fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs1 ScopeThis document specifies dimensions and performance requirements

46、for external hex and internal hex port plugs for use with ISO 6149-1 por t s.Port plugs in accordance with this document can be used at working pressures up to 63 MPa (630 bar1). The permissible working pressure depends upon the plug end size, materials, design, working conditions, application, etc.

47、Conformance to the dimensional information in this document does not guarantee rated performance. Each manufacturer is expected to perform testing according to the specification contained in this document to assure that components comply with the performance ratings.WARNING The use of stud ends conf

48、orming to this document with ports conforming to the relevant parts of ISO 1179, ISO 9974 and ISO 11926 could lead to a hazardous situation.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this docum

49、ent. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 48, Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IHRD)ISO 261:1998, ISO general purpose metric screw threads General planISO 1629, Rubber and latices NomenclatureISO 3601-3:2005, Fluid power systems O-rings Part 3: Quality acceptance criteriaISO 4042, Fasteners Electroplated coatingsISO 4759-1:

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1