1、BRITISH STANDARD BS EN ISO 9100-1:2005 Glass containers Vacuum lug finishes Part 1: General The European Standard EN ISO 9100-1:2005 has the status of a British Standard ICS 55.100 BS EN ISO 9100-1:2005 This British Standard was published under the authority of the Standards Policy and Strategy Comm
2、ittee on 10 February 2005 BSI 10 February 2005 ISBN 0 580 45433 9 National foreword This British Standard is the official English language version of EN ISO 9100-1:2005. It is identical with ISO 9100-1:2004. The UK participation in its preparation was entrusted to Technical Committee PKW/0, Packagin
3、g, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under th
4、e section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicat
5、ion. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monit
6、or related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, the EN ISO foreword page, the ISO title page, pages ii to v, a blank page, page 1 and a back cover. The BSI copyright no
7、tice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO91001 January2005 ICS55.100 Englishversion GlasscontainersVacuumlugfinishesPart1:General(ISO 91001:2005) Rcipient
8、senverreBaguescranspourbouchagesous videPartie1:Gnralits(ISO91001:2005) GlasbehlterVakuumNockenverschlussMndungen Teil1:Allgemeines(ISO91001:2005) ThisEuropeanStandardwasapprovedbyCENon23September2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivin
9、gthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyo
10、therlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,I
11、reland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrights
12、ofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO91001:2005:E Foreword This document (EN ISO 9100-1:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/
13、TC 63 “Glass containers”. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. According to the CEN/CENELEC
14、Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N
15、etherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. ENISO91001:2005 Reference number ISO 9100-1:2005(E)INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Rcipients en verre Bagues crans
16、pour bouchage sous vide Partie 1: Gnralits ENISO91001:2005IS-0019 O1:(5002)E DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i d
17、nanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacu
18、dorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapteres wetpo erimizf deoirp rnti.gn Evc yreasah er t neebakt neo snet erutah teh file is suitlbaf eosu rI yb eSO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,
19、dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ii ENISO91001:2005 iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried
20、 out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
21、 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Internation
22、al Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elem
23、ents of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 9100-1 was prepared by the European Committee for Standardization (CEN) in collaboration with Technical Committee ISO/TC 63, Glass containers, in accordance
24、 with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This first edition cancels and replaces ISO 9100:1992. ISO 9100 consists of the following parts, under the general title Glass containers Vacuum lug finishes: Part 1: General Part 2: 33 medium Part 3: 38 regular Par
25、t 4: 38 medium Part 5: 43 and 48 regular Part 6: 53 and 58 regular Part 7: 58 deep Part 8: 63, 66 and 70 regular Part 9: 63, 66 and 70 deep Part 10: 77 regular Part 11: 82 regular Part 12: 89 regular Part 13: 100 regular Part 14: 110 regular ENISO91001:2005iv Contents Page Forewordv 1 Scope 1 2 Type
26、s.1 ENISO91001:2005 vForeword This document (EN ISO 9100-1:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 63 “Glass containers”. This European Standard shall be given the status of a n
27、ational standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following count
28、ries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerl
29、and and United Kingdom. ENISO91001:2005ENISO91001:2005 11 Scope This document specifies the types of vacuum lug finishes for glass containers for prEN ISO 9100-2 to EN ISO 9100-14. 2 Types The following types of vacuum lug finishes are included in the following parts: prEN ISO 9100-2: 33 medium prEN
30、 ISO 9100-3: 38 regular prEN ISO 9100-4: 38 medium EN ISO 9100-5: 43 and 48 regular EN ISO 9100-6: 53 and 58 regular EN ISO 9100-7: 58 deep EN ISO 9100-8: 63, 66 and 70 regular EN ISO 9100-9: 63, 66 and 70 deep EN ISO 9100-10: 77 regular EN ISO 9100-11: 82 regular EN ISO 9100-12: 89 regular EN ISO 9
31、100-13: 100 regular EN ISO 9100-14: 110 regular The above-mentioned parts 2, 3 and 4 are under preparation and will be published later. The following parts are under development and may be added to the series later: 27 regular 30 medium ENISO91001:2005BS EN ISO 9100-1:2005 BSI 389 Chiswick High Road
32、 London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment
33、or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would i
34、nform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest
35、editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In respon
36、se to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through
37、its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI
38、 are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online ac
39、cess to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internation
40、al standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does
41、 not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
