1、BRITISH STANDARD BS ISO 10154:1991 Implementation of ISO10154:1991 Light gauge metal containers Three-piece necked-in tinplate aerosol cans Dimensions of the top end UDC 621.798.144BSISO10154:1991 This BritishStandard, having been prepared under the directionof the Consumer Products and Services Sec
2、tor Board, was published under theauthority of the StandardsBoard and comesinto effect on 15August1995 BSI02-2000 The following BSI references relate to the work on this standard: Committee reference PKM/21 Draft for comment90/44371 DC ISBN 0 580 24448 2 Committees responsible for this British Stand
3、ard The preparation of this BritishStandard was entrusted to Technical Committee PKM/21, Pressurized packages, upon which the following bodies were represented: British Aerosol Manufacturers Association British Compressed Gases Association British Plastics Federation Consumer Policy Committee of BSI
4、 Cosmetic, Toiletry and Perfumery Association Limited Department of Trade and Industry (Consumer Safety Unit, C A Division) Health and Safety Executive Institute of Trading Standards Administration LP Gas Association Metal Packaging Manufacturers Association Society of Cosmetic Scientists Amendments
5、 issued since publication Amd. No. Date CommentsBSISO10154:1991 BSI 02-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword iii Text of ISO10154 1BSISO10154:1991 ii BSI 02-2000 National foreword This BritishStandard reproduces verbatim ISO10154:1991 and implem
6、ents it as the UK national standard. This BritishStandard is published under the direction of the Consumer Products and Services Sector Board whose Technical Committee PKM/21 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enqui
7、ries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, BSI,389 Chiswick High
8、 Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages Thi
9、s document comprises a front cover, an inside front cover, pagesi andii, theISO title page, pagesii toiv, pages1 and2 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cove
10、r.ISO10154:1991(E) ii BSI 02-2000 Contents Page Foreword iii 1 Scope 1 2 Normative reference 1 3 Definitions 1 4 Dimensions 1 Figure 1 2 Table 1 1 Descriptors: Containers, metal packaging, spray cans, dimensions.ISO10154:1991(E) BSI 02-2000 iii Foreword ISO (the International Organization for Standa
11、rdization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right t
12、o be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft Internation
13、al Standards adopted by the technical committees are circulated to the member bodies for voting, Publication as an International Standard requires approval by at least75% of the member bodies casting a vote. International Standard ISO10154 was prepared by Technical Committee ISO/TC52, Light gauge me
14、tal containers, Sub-Committee SC6, Aerosol containers.iv blankISO10154:1991(E) BSI 02-2000 1 1 Scope This International Standard specifies dimensions of the top end of three-piece necked-in tinplate aerosol cans. 2 Normative reference The following standard contains provisions which, through referen
15、ce in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most
16、 recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO90-3:1986, Light gauge metal containers Definitions and determination methods for dimensions and capacities Part3: Aerosol cans. 3 Definitions For the purposes of
17、 this International Standard, the definitions given in ISO90-3 apply. 4 Dimensions The dimensions of the top end shall be as shown in Figure 1 and as specified in Table 1. The dimensions H 1and H 3are defined in ISO90-3. Table 1 Dimensions in millimetres Nominal internal body diameter D i External d
18、iameter of the seam D 1 0,3 Height of the seam C 0,15 Height of the top end H 2 0,4 Height of the neck H 4 45 43,6 2,9 5,6 5,3 49 47,8 2,9 7 5,5 52 50,7 3,2 8 5,6 57 55,5 3,3 9,5 6 65 63,2 3,3 13,5 6,3 +0,5 0ISO10154:1991(E) 2 BSI 02-2000 Figure 1 blankBS ISO 10154:1991 BSI 389 Chiswick High Road Lo
19、ndon W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revis
20、ion. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the
21、Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buyin
22、g standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as Briti
23、shStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give deta
24、ils on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Mem
25、bership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract m
26、ay be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols,
27、 and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
