1、BS ISO 17451-1:2016Packaging Codification ofcontents for inventories forshipments of household goodsand personal effectsPart 1: Numeric codification of inventoriesBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 17451-1:2016 BRITISH STANDARDNational forewordThi
2、s British Standard is the UK implementation of ISO 17451-1:2016.The UK participation in its preparation was entrusted to TechnicalCommittee PKW/0, Packaging.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include a
3、ll the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 82860 7ICS 55.020Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stand
4、ard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2016.Amendments issued since publicationDate Text affectedBS ISO 17451-1:2016 ISO 2016Packaging Codification of contents for inventories for shipments of household goods and personal effects Part 1: Numeri
5、c codification of inventoriesEmballages Codification du contenu pour inventaires pour les expditions des biens dquipement mnager et deffets personnels Partie 1: Codification numrique des inventairesINTERNATIONAL STANDARDISO17451-1First edition2016-07-15Reference numberISO 17451-1:2016(E)BS ISO 17451
6、-1:2016ISO 17451-1:2016(E)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, includin
7、g photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41
8、 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 17451-1:2016ISO 17451-1:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Application . 24.1 HHG item codes (Annex A) . 24.2 HHG packaging type codes (Annex B). 34.3 Method of preparation
9、 of HHG items (Annex C) 34.4 Mode codes (Annex D) . 34.5 Location codes (Annex E) 34.6 Exception codes (Annex F) . 44.7 Exception location codes (Annex G) . 44.8 Basic information 4Annex A (normative) HHG item codes . 5Annex B (normative) HHG packaging type codes .25Annex C (normative) Method of pre
10、paration of the HHG items 28Annex D (normative) HHG mode type codes .29Annex E (normative) HHG location codes 30Annex F (normative) HHG exception codes 33Annex G (normative) HHG exception location codes 34Bibliography .36 ISO 2016 All rights reserved iiiContents PageBS ISO 17451-1:2016ISO 17451-1:20
11、16(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which
12、 a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all mat
13、ters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This do
14、cument was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all
15、such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and d
16、oes not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www
17、.iso.org/iso/foreword.html.The committee responsible for this document is Technical Committee ISO/TC 122, Packaging.A list of all parts in the ISO 17451 series can be found on the ISO website.This document is based upon ANSI/HHGFAA NCC 2008-001-2010 and has been revised during the ISO standards deve
18、lopment process. ANSI/HHGFAA NCC 2008-001-2010 will be withdrawn upon publication.iv ISO 2016 All rights reservedBS ISO 17451-1:2016ISO 17451-1:2016(E)IntroductionThis document seeks to codify the components of household goods and personal effects shipments. These shipments consist of items which ar
19、e for residential and/or professional use, not for commercial resale and belong to private individuals.By codifying the components of these shipments, the international moving industry seeks to provide a common codified language, which will enable users and industry stakeholders to communicate this
20、information regardless of their language of choice and, as a result, promote transparency and visibility for these shipments.A secondary motivation for the development of this document is to encourage standardization and, in turn, efficiency within the industry. ISO 2016 All rights reserved vBS ISO
21、17451-1:2016BS ISO 17451-1:2016Packaging Codification of contents for inventories for shipments of household goods and personal effects Part 1: Numeric codification of inventories1 ScopeThis document relates to the moving of household goods and personal effects. It provides the codification of items
22、 and their condition, the transportation modes and associated data relating to a shipment. The relevant codes can be found in the related annexes and information regarding their use can be found in Clause 4.The objective of this document is to provide a common set of codes which allow movers of hous
23、ehold goods and personal effects to exchange shipment-related information with each other and with external partners.2 Normative referencesThere are no normative references cited in this document.3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 21067 a
24、nd the following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp3.1inventorycomplete list of items in a particular sh
25、ipment (3.9)3.2household goods (HHG) itemsgoods and personal effects normally used within private residencesNote 1 to entry: They are tangible and movable personal property found in domestic premises.3.3HHG packaging typeproduct to be used for the containment, protection, handling, delivery, storage
26、, and transport of a HHG item3.4method of preparation of HHG itemsstatus of HHG items when control is transferred to the moving company3.5modemeans by which a shipment (3.9) is transported from origin to destination including storageINTERNATIONAL STANDARD ISO 17451-1:2016(E) ISO 2016 All rights rese
27、rved 1BS ISO 17451-1:2016ISO 17451-1:2016(E)3.6locationplace where household goods can be found in the domestic premises3.7exceptionsuspected or actual damage or irregularities of an HHG item or its packaging3.8exception locationplace where an exception (3.7) can be found on an HHG item or its packa
28、ging3.9shipmentHHG items transported and/or stored under the terms of a single bill of lading, waybill, or contract of carriage irrespective of the quantity or number of containers, packages, or pieces4 ApplicationThe following words are used to make the distinctions within this document: requiremen
29、ts: shall, shall not; recommendations: should, should not; permissions: may, may not; possibility and capability: can, cannot.The following elements are codified in this document: HHG items; packaging types; methods of preparation of HHG items; modes; locations; exceptions; exception locations.The c
30、ode lists have been set up in the following languages: English; French; German; Spanish.More information on each set of codes can be found below.4.1 HHG item codes (Annex A)The objective of Annex A is to list the items which comprise a typical Household Goods shipment and their corresponding numeric
31、al item codes.Users shall utilize this codification in order to classify the items which constitute the shipment.2 ISO 2016 All rights reservedBS ISO 17451-1:2016ISO 17451-1:2016(E)It is recommended that users should describe items with the most specific code practical, for example, “table-coffee”,
32、“table-computer”, or “table-kitchen”. However, Annex A also provides users with the ability to classify an item as a “Generic Item”, for example, “table”, whenever the term “not further specified” follows at the next level.Where a specific code does not exist for an item and “other” is selected, use
33、rs shall provide a description of that item. For example, if users need to classify an unlisted item, they shall use the term “other” and provide details such as “African Mask”, “Cuckoo Clock”, etc. in the description.4.2 HHG packaging type codes (Annex B)The objective of Annex B is to list the type
34、s of packaging which may be used in a Household Goods shipment and their corresponding numeric codes.Users should utilize Annex B to classify the packaging types which have been used in the preparation of HHG items for the shipment. Multiple codes can be used to describe the packaging.Users can desc
35、ribe the packaging type with a specific code, for example, “carton-book”, “carton-file”, or “carton-china”. However, Annex B also provides users with the ability to classify the packaging as “Generic”, for example, “carton”, whenever the term “not further specified” follows at the next level.If a sp
36、ecific code does not exist for packaging and “other” is selected, users shall provide a description of the packaging. For example, if users classify packaging as “other”, they shall provide details such as “Steel Frame Pallet”, “Roll File Container”, etc. in the description.4.3 Method of preparation
37、 of HHG items (Annex C)The objective of Annex C is to list the types of preparation methods of HHG items when control is transferred to the moving company and their corresponding codes.Users should utilize Annex C to describe the method of preparation of the HHG items for transport or storage. Multi
38、ple codes can be used to describe the methods of preparation.If a specific code does not exist for a method of preparation and “other” is selected, users shall provide a description of the method of preparation. For example, if users classify method of preparation as “other”, they shall provide deta
39、ils such as “Sealed by customer” in the description.4.4 Mode codes (Annex D)The objective of Annex D is to list the types of HHG transportation modes and their corresponding codes.Users shall utilize Annex D to describe how the shipment will be transported and/or stored from origin to destination. I
40、f multiple modes are to be used, the primary transport mode shall be stated at least.If a specific code does not exist for a mode and “other” is selected, users shall provide a description of the mode. For example, if users classify the mode as “other”, they shall provide details such as “Helicopter
41、” in the description.4.5 Location codes (Annex E)The objective of Annex E is to list the places where HHG items are located in the home and the corresponding location codes.Users may utilize Annex E to describe either or both of the places in which the HHG item was located at origin and/or where it
42、will be placed at destination.It is recommended that users should describe locations with the most specific code practical, for example, “bathroom-first” or “bathroom-second”. However, Annex E also provides users with the ability to classify a location as a “Generic Location”, for example, “bathroom
43、”, whenever the term “not further specified” follows at the next level. ISO 2016 All rights reserved 3BS ISO 17451-1:2016ISO 17451-1:2016(E)If a specific code does not exist for a location and “other” is selected, users shall provide a description of the location. For example, if users classify the
44、location as “other”, they shall provide details such as “Landing”, “Prayer Room”, “Mud Room”, etc. in the description.4.6 Exception codes (Annex F)The objective of Annex F is to list the exceptions which explain the condition of the contents within a HHG shipment and the corresponding exception code
45、s.Users should utilize Annex F to describe the condition of the HHG item and/or packaging at origin as well as when it was received. Multiple exceptions can be recorded.If a specific code does not exist for an exception and “other” is selected, users shall provide a description of the exception. For
46、 example, if users classify the exception as “other”, they shall provide details such as “bowed”, “bubbled”, etc. in the description.In the event that exceptions are identified between origin and destination, these codes should be utilized.Note Absence of exceptions can imply good condition.4.7 Exce
47、ption location codes (Annex G)The objective of Annex G is to list the place where an exception has been identified on a HHG item or its packaging and the corresponding exception location code.If an exception has been identified, users shall utilize Annex G to describe the location of the exception.
48、Multiple locations can be recorded.If a specific code does not exist for an exception location and “other” is selected, users shall provide a description of the exception location. For example, if users classify the exception location as “other”, they shall provide details such as “Hose”, etc. in th
49、e description.4.8 Basic informationThe following basic information shall be provided with the inventory: first and last name of the client; address of origin (street, town, postal code, country); creation date of the inventory.The following basic information should be additionally provided with the inventory, if available: address of destination (street, town, postal code, country); date of delivery; for sealed container: Seal Code.4 ISO 2016 All rights reservedBS ISO 17451-1:2016ISO 17451-1:2016(E)Annex A (normati
