1、BSI Standards PublicationBS ISO 17740-1:2015Building constructionmachinery and equipment Concrete placing systems forstationary equipmentPart 1: Terminology and commercialspecificationsBS ISO 17740-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 17740-1:
2、2015.The UK participation in its preparation was entrusted to TechnicalCommittee B/513, Construction equipment and plant and site safety.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprov
3、isions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 83476 9ICS 01.040.91; 91.220Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was p
4、ublished under the authority of theStandards Policy and Strategy Committee on 31 July 2015.Amendments issued since publicationDate Text affectedBS ISO 17740-1:2015 ISO 2015Building construction machinery and equipment Concrete placing systems for stationary equipment Part 1: Terminology and commerci
5、al specificationsMachines et matriels pour la construction des btiments Systme de distribution de bton pour quipements stationnaires Partie 1: Terminologie et spcifications commercialesINTERNATIONAL STANDARDISO17740-1First edition2015-07-15Reference numberISO 17740-1:2015(E)BS ISO 17740-1:2015ISO 17
6、740-1:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopyin
7、g, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11
8、Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 17740-1:2015ISO 17740-1:2015(E)Foreword ivIntroduction v1 Scope . 12 Terms and definitions . 13 Classification 24 Dimensions . 65 Commercial specifications . 75.1 General characteristics . 75.2 Dimensional characteristics 85.3 System characterist
9、ics 9Bibliography .10 ISO 2015 All rights reserved iiiContents PageBS ISO 17740-1:2015ISO 17740-1:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is norma
10、lly carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in th
11、e work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the
12、different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this documen
13、t may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/p
14、atents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO princ
15、iples in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 195, Building construction machinery and equipment, Subcommittee SC 1, Machinery and equipment for concrete work.ISO 17740 consists of the f
16、ollowing parts, under the general title Building construction machinery and equipment Concrete placing systems for stationary equipment: Part 1: Terminology and commercial specificationsAdditional parts, dealing with safety requirements, are under preparation.iv ISO 2015 All rights reservedBS ISO 17
17、740-1:2015ISO 17740-1:2015(E)IntroductionThis International Standard is part of a series of standards for concrete placing systems which are mounted on a slewing pedestal at the top of a base structure. ISO 2015 All rights reserved vBS ISO 17740-1:2015BS ISO 17740-1:2015Building construction machine
18、ry and equipment Concrete placing systems for stationary equipment Part 1: Terminology and commercial specifications1 ScopeThis part of ISO 17740 defines terminology and commercial specifications for concrete placing systems which are stationary.This part of ISO 17740 is not applicable to concrete p
19、lacing systems which are part of a mobile or trailer-mounted concrete pumping system (see ISO 21573-1).2 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.2.1concrete placing systempower-driven devices consisting of an extensible placing boom, a boom p
20、edestal and base structure to deposit concrete2.2placing boomextensible boom with a fixed concrete conveying pipe for delivering concrete to work areas within its reachNote 1 to entry: Typically, a rubber hose is fixed to the end of the conveying pipe to facilitate concrete distribution.2.3boom pede
21、stalsupport structure for connecting the placing boom with the base structure2.4counter-jib and ballastcounter-weighted structure which is typically located 180 opposite the placing boom which offsets or partially offsets the weight and moments of the placing boom2.5control stationlocation which con
22、tains devices or controls for the operation of the concrete placing systemNote 1 to entry: This can include a radio remote, cable remote or local controls and emergency controls. The normal working place during pumping and distributing concrete is the remote control.2.6working platformwork area typi
23、cally used for assembly and maintenance workINTERNATIONAL STANDARD ISO 17740-1:2015(E) ISO 2015 All rights reserved 1BS ISO 17740-1:2015ISO 17740-1:2015(E)2.7base structuretubular columns, lattice booms or other base structures on which stationary booms can be erectedNote 1 to entry: Base structure
24、can be affixed to a baseplate, wall or other structure and typically includes the distributing pipeline, working platform and an access ladder.2.8floor frameguide for the base structure in the floor of the buildingNote 1 to entry: It also can be part of the self-climbing system, in which case it is
25、part of the vertical support.2.9access laddermeans of access to the working platform2.10climbing systemcombination of components and assemblies that allow for the lifting and support of the entire concrete placing system within or outside a building or structureNote 1 to entry: This system includes
26、provisions for connecting to a building or structure for both vertical and horizontal support and can be lifted with a crane or other lifting device.2.10.1self-climbing systemhydraulically-powered climbing and engagement system for lifting and support of the entire concrete placing system without th
27、e use of a crane or other lifting device2.11base plateclamps the free-standing concrete-placing boom to the ground floor and supports the base structure2.11.1ballastable base structureemploys counter-balancing weights to support the free-standing concrete-placing boom and the base structure2.12free-
28、standing systemapplication method which allows the concrete placing system and base structure to function up to a given height without being supported by a building or structure2.12.1ballasted free-standing systememploys counterbalancing weights mounted to a ballastable base structure instead of a m
29、ethod for rigidly attaching the base structure to a grounded structure2.12.2supported free-standing systemadditional horizontal support from a building or structure because its height exceeds the overturning support capacity of the base3 ClassificationThe concrete placing systems shall be classified
30、 by the following: free-standing and ballasted free-standing (see Figure 1); free-standing with support (see Figure 2);2 ISO 2015 All rights reservedBS ISO 17740-1:2015ISO 17740-1:2015(E) inside climbing (see Figure 3); wall mount (see Figure 4).1256744367521a) Free-standing b) Ballasted free-standi
31、ngKey1 placing boom2 boom pedestal3 counter-jib and ballast4 control station5 working platform6 base structure7 base plateFigure 1 Free-standing and ballasted free-standing ISO 2015 All rights reserved 3BS ISO 17740-1:2015ISO 17740-1:2015(E)346789521Key1 placing boom2 boom pedestal3 counter-jib and
32、ballast4 control station5 working platform6 base structure7 floor frame8 climbing system9 base plateFigure 2 Free-standing with support4 ISO 2015 All rights reservedBS ISO 17740-1:2015ISO 17740-1:2015(E)12534678Key1 placing boom2 boom pedestal3 counter-jib and ballast4 control station5 working platf
33、orm6 base structure7 floor frame8 climbing systemFigure 3 Inside climbing (self-climbing shown) ISO 2015 All rights reserved 5BS ISO 17740-1:2015ISO 17740-1:2015(E)1234567Key1 placing boom2 boom pedestal3 control station4 working platform5 base structure6 horizontal support7 climbing systemFigure 4
34、Wall mount (self-climbing shown)4 DimensionsDimensions of concrete placing booms are shown in Figure 5.6 ISO 2015 All rights reservedBS ISO 17740-1:2015ISO 17740-1:2015(E)Dimensions in meters353025201510505101520253010 5 0510 15 20 25 30 35DHLKeyD boom depth reach(including end hose)H boom vertical
35、reachL boom horizontal reach elevation angle of boom arm 1 articulation angle of boom arm 2 articulation angle of boom arm 3 articulation angle of boom arm 4 slewing angleNOTE Dimensions for multiple section booms are not shown.Figure 5 Working range diagram of a concrete placing boom5 Commercial sp
36、ecifications5.1 General characteristicsThe following general characteristics shall be specified: manufacturer(including contact information); ISO 2015 All rights reserved 7BS ISO 17740-1:2015ISO 17740-1:2015(E) prime mover (combustion engine or electric):a) if combustion engine:1) type (spark igniti
37、on or compression ignition);2) model;3) manufacturer;4) operating speed;5) engine net power;6) fuel type;7) fuel tank capacity;b) if electric:1) model and type;2) rated power;3) rated current;4) voltage and frequency;5) speed range.5.2 Dimensional characteristicsThe following dimensional characteris
38、tics shall be specified: horizontal reach (m); vertical reach (m); boom depth reach (including end hose) (m); boom arm lengths (as applicable): arm 1 (m); arm 2 (m); arm 3 (m); arm 4 (m); arm 5 (m); articulation angles (as applicable): arm 1 (deg); arm 2 (deg); arm 3 (deg); arm 4 (deg); arm 5 (deg);
39、 slewing angle (deg);8 ISO 2015 All rights reservedBS ISO 17740-1:2015ISO 17740-1:2015(E) delivery line diameter (as supplied); length of rubber end hose (m).5.3 System characteristicsThe following placing boom system characteristics shall be specified: model; number of boom sections; mass (for cran
40、e lifting) (kg); working ambient temperature(min/max) (C); slewing speed (rpm); system hydraulic pressure (MPa); oil tank capacity (l). ISO 2015 All rights reserved 9BS ISO 17740-1:2015ISO 17740-1:2015(E)Bibliography1 ISO 11375, Building construction machinery and equipment Terms and definitions2 IS
41、O 21573-1, Building construction machinery and equipment Concrete pumps Part 1: Terminology and commercial specifications10 ISO 2015 All rights reservedBS ISO 17740-1:2015BS ISO 17740-1:2015ISO 17740-1:2015(E) ISO 2015 All rights reservedICS 91.220; 01.040.91Price based on 10 pagesThis page delibera
42、tely left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards I
43、nstitution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been ca
44、refully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find
45、out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard
46、copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further in
47、formation on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with stand
48、ards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your sta
49、ndards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be
