1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 18096:2013Thermal insulating productsfor building equipment andindustrial installations Determination of maximumservice temperature forpreformed pipe insulationBS ISO 1809
2、6:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 18096:2013.The UK participation in its preparation was entrusted to TechnicalCommittee B/540/8, Mirror committee for ISO/TC 163 - ThermalPerformance and Energy use in the built Environment.A list of organiz
3、ations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN
4、 978 0 580 79585 5ICS 91.100.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2013.Amendments issued since publicationDate Text affectedBS ISO 18096:2013
5、 ISO 2013Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe insulationProduits isolants thermiques pour lquipement du btiment et les installations industrielles Dtermination de la temprature maximale de serv
6、ice des coquilles isolantes prformesINTERNATIONAL STANDARDISO18096First edition2013-03-15Reference numberISO 18096:2013(E)BS ISO 18096:2013ISO 18096:2013(E)ii ISO 2013 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2013All rights reserved. Unless otherwise specified, no part of this publication
7、 may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of
8、the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 18096:2013ISO 18096:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative
9、references 13 Terms and definitions . 14 Principle 15 Apparatus . 26 Test specimens 46.1 Dimensions of test specimens . 46.2 Number of test specimens . 46.3 Conditioning of test specimens . 57 Procedure. 57.1 Test conditions 57.2 Test procedure . 58 Calculation and expression of results . 68.1 Thick
10、ness deformation versus time . 68.2 Additional tests and/or observations . 88.3 Internal self-heating . 89 Accuracy of measurement 810 Test report . 8Annex A (normative) Modifications of and additions to the general test method for mineral wool products .10Annex B (normative) Modifications of and ad
11、ditions to the general test method for polyethylene foam (PEF) and flexible elastomeric foam (FEF) products 12Annex C (normative) Modifications of and additions to the general test method for phenolic foam products.15BS ISO 18096:2013ISO 18096:2013(E)ForewordISO (the International Organization for S
12、tandardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the ri
13、ght to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedure
14、s used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial ru
15、les of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified
16、during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement. The committee responsible for t
17、his document is ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 1, Test and measurement methods.ISO 18096 includes the original EN 14707 prepared by Technical Committee CEN/TC 88, Thermal insulating materials and products. However subclause 6.3 “Conditioning
18、of test specimens”, subclause 7.1 “Test conditions”, Clause 10 “Test report” and C.2 “Conditioning of test specimens”have been modified to reflect conditions for tropical countries.iv ISO 2013 All rights reservedBS ISO 18096:2013ISO 18096:2013(E)IntroductionThis International Standard is one of a se
19、ries of International Standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. The original EN 14707 supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21
20、December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements.This International Standard has been prepared for products used to insulate buil
21、ding equipment and industrial installations, but it may also be applied to products used in other areas.A similar International Standard, ISO 18097, is available for testing of flat products.This International Standard is one of a series of existing European Standards on test methods for products us
22、ed to insulate building equipment and industrial installations which comprises the following group of International Standards:ISO standard TitleRespective EN standardISO 12623 Thermal insulating products for building equipment and industrial installa-tions Determination of short-term water absorptio
23、n by partial immer-sion of preformed pipe insulationEN 13472ISO 12624 Thermal insulating products for building equipment and industrial instal-lations Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pHEN 13468ISO 12628 Thermal insulating products for
24、building equipment and industrial installa-tions Determination of dimensions, squareness and linearity of pre-formed pipe insulationEN 13467ISO 12629 Thermal insulating products for building equipment and industrial instal-lations Determination of water vapour transmission properties of pre-formed p
25、ipe insulationEN 13469ISO 18096 Thermal insulating products for building equipment and industrial instal-lations Determination of maximum service temperature for preformed pipe insulationEN 14707ISO 18097 Thermal insulating products for building equipment and industrial installa-tions Determination
26、of maximum service temperatureEN 14706ISO 18098 Thermal insulating products for building equipment and industrial installa-tions Determination of the apparent density of preformed pipe insulationEN 13470ISO 18099 Thermal insulating products for building equipment and industrial installa-tions Determ
27、ination of the coefficient of thermal expansionEN 13471A further series of existing European Standards on test methods was adopted by ISO. This “package” of standards comprises the following group of interrelated standards:ISO standard TitleRespective EN standardISO 12344 Thermal insulating products
28、 for building applications Determination of bending behaviourEN 12089 ISO 2013 All rights reserved vBS ISO 18096:2013ISO 18096:2013(E)ISO standard TitleRespective EN standardISO 12968 Thermal insulation products for building applications Determination of the pull-off resistance of external thermal i
29、nsulation composite systems (ETICS) (foam block test)EN 13495ISO 29465 Thermal insulating products for building applications Determination of length and widthEN 822ISO 29466 Thermal insulating products for building applications Determination of thicknessEN 823ISO 29467 Thermal insulating products fo
30、r building applications Determination of squarenessEN 824ISO 29468 Thermal insulating products for building applications Determination of flatnessEN 825ISO 29469 Thermal insulating products for building applications Determination of compression behaviourEN 826ISO 29470 Thermal insulating products fo
31、r building applications Determination of the apparent densityEN 1602ISO 29471 Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity)EN 1603ISO 29472 Thermal insulating products for
32、 building applications Determination of dimensional stability under specified temperature and humidity conditionsEN 1604ISO 29764 Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature conditionsEN 1605ISO 29765 Thermal ins
33、ulating products for building applications Determination of tensile strength perpendicular to facesEN 1607ISO 29766 Thermal insulating products for building applications Determination of tensile strength parallel to facesEN 1608ISO 29767 Thermal insulating products for building applications Determin
34、ation of short-term water absorption by partial immersionEN 1609ISO 29768 Thermal insulating products for building applications Determination of linear dimensions of test specimensEN 12085ISO 29769 Thermal insulating products for building applications Determination of behaviour under point loadEN 12
35、430ISO 29770 Thermal insulating products for building applications Determination of thickness for floating-floor insulating productsEN 12431ISO 29771 Thermal insulating materials for building applications Determination of organic contentEN 13820ISO 29803 Thermal insulation products for building appl
36、ications Determination of the resistance to impact of external thermal insulation composite systems (ETICS)EN 13497vi ISO 2013 All rights reservedBS ISO 18096:2013ISO 18096:2013(E)ISO standard TitleRespective EN standardISO 29804 Thermal insulation products for building applications Determination of
37、 the tensile bond strength of the adhesive and of the base coat to the thermal insulation materialEN 13494ISO 29805 Thermal insulation products for building applications Determination of the mechanical properties of glass fibre meshesEN 13496ISO 16534 Thermal insulating products for building applica
38、tions Determination of compressive creepEN 1606ISO 16535 Thermal insulating products for building applications Determination of long-term water absorption by immersionEN 12087ISO 16536 Thermal insulating products for building applications Determination of long-term water absorption by diffusionEN 12
39、088ISO 16537 Thermal insulating products for building applications Determination of shear behaviourEN 12090ISO 16544 Thermal insulating products for building applications Conditioning to moisture equilibrium under specified temperature and humidity conditionsEN 12429ISO 16545 Thermal insulating prod
40、ucts for building applications Determination of behaviour under cyclic loadingEN 13793ISO 16546 Thermal insulating products for building applications Determination of freeze-thaw resistanceEN 12091The Application of Agreement on technical cooperation between ISO and CEN (Vienna Agreement), Modes 1,
41、2, 4 and 5, was not approved by CEN/TC 88 and the necessity not seen by its stakeholders. ISO 2013 All rights reserved viiBS ISO 18096:2013BS ISO 18096:2013Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe
42、insulation1 ScopeThis International Standard specifies the equipment and procedures for determining the maximum service temperature for preformed pipe insulation. It is applicable to thermal insulating products.2 Normative referencesThe following referenced documents are indispensable for the applic
43、ation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 9229, Thermal insulation VocabularyISO 16544, Thermal insulating products for building applications Conditioning
44、to moisture equilibrium under specified temperature and humidity conditionsISO 12628, Thermal insulating products for building equipment and industrial installations Determination of dimensions, squareness and linearity of preformed pipe insulation3 Terms and definitionsFor the purposes of this docu
45、ment, the following terms and definitions apply.3.1maximum service temperaturehighest temperature at which the insulation product, when installed at the recommended thickness in a given application, continues to function within specified limits of performanceISO 9229:2007, definition 2.6.9.1Note 1 t
46、o entry: The required performance may be in the areas of dimensional stability, thermal properties, and mechanical properties, as well as changes in appearance and resistance against creation of hazards such as internal self-heating (see annexes and requirements in the relevant product standard).Not
47、e 2 to entry: In the present test procedure, which is used as a reference, the test specimen is exposed to a temperature difference going from ambient to the maximum service temperature. This may not reflect the actual application conditions when products are exposed to different temperatures on the
48、 two main faces, e.g. in multi-layer systems or for faced products where the facing may limit the maximum service temperature.4 PrincipleMeasure thickness and length after one sided heat treatment for a specified time period, at the maximum service temperature, achieved using a specified rate of tem
49、perature increase. The thickness of the test specimen is measured during heat treatment and the length only after cooling to ambient temperature.NOTE The procedure may be an iterative process.Additional requirements for assessing the maximum service temperature of specific materials are described in the annexes to this International Standard or the relevant product standard or any other international technical specification.INTERNATIONAL STANDARD ISO 18096:2013(E) ISO
