1、BSI Standards PublicationBS ISO 22663:2015Space data and informationtransfer systems Proximity-1space link protocol Data linklayerBS ISO 22663:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 22663:2015. It supersedes BS ISO 22663:2007 which is withdrawn.Th
2、e UK participation in its preparation was entrusted to Technical Committee ACE/68, Space systems and operations.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. U
3、sers are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87628 8 ICS 49.140 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority o
4、f the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBS ISO 22663:2015 ISO 2015Space data and information transfer systems Proximity-1 space link protocol Data link layerSystmes de transfert des informations et donnes spati
5、ales Protocole pour liaisons spatiales de proximit 1 Couche de liaisons de donnesINTERNATIONAL STANDARDISO22663Third edition2015-08-15Reference numberISO 22663:2015(E)BS ISO 22663:2015 ISO 2015Space data and information transfer systems Proximity-1 space link protocol Data link layerSystmes de trans
6、fert des informations et donnes spatiales Protocole pour liaisons spatiales de proximit 1 Couche de liaisons de donnesINTERNATIONAL STANDARDISO22663Third edition2015-08-15Reference numberISO 22663:2015(E)BS ISO 22663:2015ISO 22663:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT IS
7、O 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permiss
8、ion. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 22663:2015ISO 22663:2
9、015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or p
10、osting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41
11、 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 22663:2015ISO 22663:2015(E) ISO 2015 All rights reserved iiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is nor
12、mally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in
13、the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepar
14、e International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that som
15、e of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 22663 was prepared by the Consultative Committee for Space Data Systems (CCSDS) (as CCSDS 211.0-B-5, December 2013) and was adopted (without mo
16、difications except those stated in clause 2 of this International Standard) by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee SC 13, Space data and information transfer systems.This third edition of ISO 22663:2015 cancels and replaces the second edition (ISO 22663:2007), wh
17、ich has been technically revised. BS ISO 22663:2015BS ISO 22663:2015Recommendation for Space Data System Standards PROXIMITY-1 SPACE LINK PROTOCOLDATA LINK LAYER RECOMMENDED STANDARD CCSDS 211.0-B-5 BLUE BOOK December 2013 BS ISO 22663:2015Recommendation for Space Data System Standards PROXIMITY-1 S
18、PACE LINK PROTOCOLDATA LINK LAYER RECOMMENDED STANDARD CCSDS 211.0-B-5 BLUE BOOK December 2013 BS ISO 22663:2015CCSDS RECOMMENDED STANDARD FOR PROXIMITY-1 SPACE DATA LINK PROTOCOL CCSDS 211.0-B-5 Page i December 2013 AUTHORITYIssue: Recommended Standard, Issue 5 Date: December 2013 Location: Washing
19、ton, DC, USA This document has been approved for publication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and represents the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for review and authorization of CCSDS documen
20、ts is detailed in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-3), and the record of Agency participation in the authorization of this document can be obtained from the CCSDS Secretariat at the address below. This document is published and maintaine
21、d by: CCSDS Secretariat Space Communications and Navigation Office, 7L70 Space Operations Mission Directorate NASA Headquarters Washington, DC 20546-0001, USA ISO 22663:2015(E) ISO 2015 All rights reservedBS ISO 22663:2015CCSDS RECOMMENDED STANDARD FOR PROXIMITY-1 SPACE DATA LINK PROTOCOL CCSDS 211.
22、0-B-5 Page ii December 2013 STATEMENT OF INTENT The Consultative Committee for Space Data Systems (CCSDS) is an organization officially established by the management of its members. The Committee meets periodically to address data systems problems that are common to all participants, and to formulat
23、e sound technical solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary, the results of Committee actions are termed Recommended Standards and are not considered binding on any Agency. This Recommended Standard is issued by, and represents the consensus of, the
24、CCSDS members. Endorsement of this Recommendation is entirely voluntary. Endorsement, however, indicates the following understandings: o Whenever a member establishes a CCSDS-related standard, this standard will be in accord with the relevant Recommended Standard. Establishing such a standarddoes no
25、t preclude other provisions which a member may develop. o Whenever a member establishes a CCSDS-related standard, that member will provide other CCSDS members with the following information: - The standard itself. - The anticipated date of initial operational capability. - The anticipated duration o
26、f operational service. o Specific service arrangements shall be made via memoranda of agreement. Neither this Recommended Standard nor any ensuing standard is a substitute for a memorandum of agreement. No later than three years from its date of issuance, this Recommended Standard will be reviewed b
27、y the CCSDS to determine whether it should: (1) remain in effect without change; (2) be changed to reflect the impact of new technologies, new requirements, or new directions; or (3) be retired or canceled. In those instances when a new version of a Recommended Standard is issued, existing CCSDS-rel
28、ated member standards and implementations are not negated or deemed to be non-CCSDS compatible. It is the responsibility of each member to determine when such standards or implementations are to be modified. Each member is, however, strongly encouraged to direct planning for its new standards and im
29、plementations towards the later version of the Recommended Standard. ISO 22663:2015(E) ISO 2015 All rights reservedBS ISO 22663:2015BS ISO 22663:2015CCSDS RECOMMENDED STANDARD FOR PROXIMITY-1 SPACE DATA LINK PROTOCOL CCSDS 211.0-B-5 Page i December 2013 AUTHORITYIssue: Recommended Standard, Issue 5
30、Date: December 2013 Location: Washington, DC, USA This document has been approved for publication by the Management Council of the Consultative Committee for Space Data Systems (CCSDS) and represents the consensus technical agreement of the participating CCSDS Member Agencies. The procedure for revi
31、ew and authorization of CCSDS documents is detailed in Organization and Processes for the Consultative Committee for Space Data Systems (CCSDS A02.1-Y-3), and the record of Agency participation in the authorization of this document can be obtained from the CCSDS Secretariat at the address below. Thi
32、s document is published and maintained by: CCSDS Secretariat Space Communications and Navigation Office, 7L70 Space Operations Mission Directorate NASA Headquarters Washington, DC 20546-0001, USA ISO 22663:2015(E) ISO 2015 All rights reservedBS ISO 22663:2015CCSDS RECOMMENDED STANDARD FOR PROXIMITY-
33、1 SPACE DATA LINK PROTOCOL CCSDS 211.0-B-5 Page ii December 2013 STATEMENT OF INTENT The Consultative Committee for Space Data Systems (CCSDS) is an organization officially established by the management of its members. The Committee meets periodically to address data systems problems that are common
34、 to all participants, and to formulate sound technical solutions to these problems. Inasmuch as participation in the CCSDS is completely voluntary, the results of Committee actions are termed Recommended Standards and are not considered binding on any Agency. This Recommended Standard is issued by,
35、and represents the consensus of, the CCSDS members. Endorsement of this Recommendation is entirely voluntary. Endorsement, however, indicates the following understandings: o Whenever a member establishes a CCSDS-related standard, this standard will be in accord with the relevant Recommended Standard
36、. Establishing such a standarddoes not preclude other provisions which a member may develop. o Whenever a member establishes a CCSDS-related standard, that member will provide other CCSDS members with the following information: - The standard itself. - The anticipated date of initial operational cap
37、ability. - The anticipated duration of operational service. o Specific service arrangements shall be made via memoranda of agreement. Neither this Recommended Standard nor any ensuing standard is a substitute for a memorandum of agreement. No later than three years from its date of issuance, this Re
38、commended Standard will be reviewed by the CCSDS to determine whether it should: (1) remain in effect without change; (2) be changed to reflect the impact of new technologies, new requirements, or new directions; or (3) be retired or canceled. In those instances when a new version of a Recommended S
39、tandard is issued, existing CCSDS-related member standards and implementations are not negated or deemed to be non-CCSDS compatible. It is the responsibility of each member to determine when such standards or implementations are to be modified. Each member is, however, strongly encouraged to direct
40、planning for its new standards and implementations towards the later version of the Recommended Standard. ISO 22663:2015(E) ISO 2015 All rights reservedBS ISO 22663:2015BS ISO 22663:2015CCSDS RECOMMENDED STANDARD FOR PROXIMITY-1 SPACE DATA LINK PROTOCOL CCSDS 211.0-B-5 Page iii December 2013 FOREWOR
41、DAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CCSDS shall not be held responsible for identifying any or all such patent rights. Through the process of normal evolution, it is expected that expansion, deletion, or modification
42、of this document may occur. This Recommended Standard is therefore subject to CCSDS document management and change control procedures, which are defined in Organization and Processes for the Consultative Committee for Space Data Systems(CCSDS A02.1-Y-3). Current versions of CCSDS documents are maint
43、ained at the CCSDS Web site: http:/www.ccsds.org/Questions relating to the contents or status of this document should be addressed to the CCSDS Secretariat at the address indicated on page i. ISO 22663:2015(E) ISO 2015 All rights reservedBS ISO 22663:2015CCSDS RECOMMENDED STANDARD FOR PROXIMITY-1 SP
44、ACE DATA LINK PROTOCOL CCSDS 211.0-B-5 Page iv December 2013 At time of publication, the active Member and Observer Agencies of the CCSDS were: Member Agencies Agenzia Spaziale Italiana (ASI)/Italy. Canadian Space Agency (CSA)/Canada. Centre National dEtudes Spatiales (CNES)/France. China National S
45、pace Administration (CNSA)/Peoples Republic of China. Deutsches Zentrum fr Luft- und Raumfahrt (DLR)/Germany. European Space Agency (ESA)/Europe. Federal Space Agency (FSA)/Russian Federation. Instituto Nacional de Pesquisas Espaciais (INPE)/Brazil. Japan Aerospace Exploration Agency (JAXA)/Japan. N
46、ational Aeronautics and Space Administration (NASA)/USA. UK Space Agency/United Kingdom. Observer Agencies Austrian Space Agency (ASA)/Austria. Belgian Federal Science Policy Office (BFSPO)/Belgium. Central Research Institute of Machine Building (TsNIIMash)/Russian Federation. China Satellite Launch
47、 and Tracking Control General, Beijing Institute of Tracking and Telecommunications Technology (CLTC/BITTT)/China. Chinese Academy of Sciences (CAS)/China. Chinese Academy of Space Technology (CAST)/China. Commonwealth Scientific and Industrial Research Organization (CSIRO)/Australia. Danish Nationa
48、l Space Center (DNSC)/Denmark. Departamento de Cincia e Tecnologia Aeroespacial (DCTA)/Brazil. European Organization for the Exploitation of Meteorological Satellites (EUMETSAT)/Europe. European Telecommunications Satellite Organization (EUTELSAT)/Europe. Geo-Informatics and Space Technology Develop
49、ment Agency (GISTDA)/Thailand. Hellenic National Space Committee (HNSC)/Greece. Indian Space Research Organization (ISRO)/India. Institute of Space Research (IKI)/Russian Federation. KFKI Research Institute for Particle b) Data Link Layer; c) entity;d) Physical Layer; e) protocol control information;f) protocol data unit; g) real system; h) segmenting; i) service;j) service data unit. 1.5.1.2 Terms Defined in This Recommended Standard For the purposes of this Reco
