1、BSI Standards PublicationBS ISO 4046-5:2016Paper, board, pulps and related terms VocabularyPart 5: Properties of pulp, paper and boardBS ISO 4046-5:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 4046-5:2016. It supersedes BS ISO 4046-5:2002 which is withd
2、rawn.The UK participation in its preparation was entrusted to Technical Committee PAI/11, Methods of test for paper, board and pulps.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provis
3、ions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 92008 0 ICS 01.040.85; 85.040; 85.060 Compliance with a British Standard cannot confer immunity from legal obligations.This British Sta
4、ndard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2016.Amendments issued since publicationDate T e x t a f f e c t e dBS ISO 4046-5:2016Reference numberNumro de rfrenceISO 4046-5:2016(E/F)ISO 2016INTERNATIONAL STANDARD NORME INTERNATIONALEISO4046-5Sec
5、ond editionDeuxime dition2016-03-01Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board Papier, carton, ptes et termes connexes Vocabulaire Partie 5: Proprits de la pte, du papier et du cartonBS ISO 4046-5:2016ISO 4046-5:2016(E/F) PDF disclaimer This PDF file
6、may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the re
7、sponsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-crea
8、tion parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. PDF Exonration de responsabilit Le
9、prsent fichier PDF peut contenir des polices de caractres intgres. Conformment aux conditions de licence dAdobe, ce fichier peut tre imprim ou visualis, mais ne doit pas tre modifi moins que lordinateur employ cet effet ne bnficie dune licence autorisant lutilisation de ces polices et que celles-ci
10、y soient installes. Lors du tlchargement de ce fichier, les parties concernes acceptent de fait la responsabilit de ne pas enfreindre les conditions de licence dAdobe. Le Secrtariat central de lISO dcline toute responsabilit en la matire. Adobe est une marque dpose dAdobe Systems Incorporated. Les d
11、tails relatifs aux produits logiciels utiliss pour la cration du prsent fichier PDF sont disponibles dans la rubrique General Info du fichier; les paramtres de cration PDF ont t optimiss pour limpression. Toutes les mesures ont t prises pour garantir lexploitation de ce fichier par les comits membre
12、s de lISO. Dans le cas peu probable o surviendrait un problme dutilisation, veuillez en informer le Secrtariat central ladresse donne ci-dessous. ISO 2016 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means,
13、 electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. Droits de reproduction rservs. Sauf indication contrai
14、re, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie, laffichage sur linternet ou sur un Intranet, sans autorisation crite pralable. Les demandes dautorisation peuvent tre adresses
15、 lISO ladresse ci-aprs ou au comit membre de lISO dans le pays du demandeur. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland/Publi en Suisse ii ISO 2016 All rights reserved/Tous droit
16、s rservsBS ISO 4046-5:2016ISO 4046-5:2016(E/F) ISO 2016 All rights reserved/Tous droits rservs iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally ca
17、rried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work
18、. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. The main task of technical committees is to prepare Intern
19、ational Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the
20、 elements of this part of ISO 4046 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4046-5 was prepared by Technical Committee ISO/TC 6, Paper, board and pulps. ISO 4046-1, ISO 4046-2, ISO 4046-3, ISO 4046-4 and ISO 4046-5 canc
21、el and replace ISO 4046:1978. Many new terms have been defined in this new series of standards since ISO 4046:1978 was published. However, the ISO 4046 series is not intended to be a comprehensive list of all terms related to paper, board and pulps. It includes definitions of relevant terms which ca
22、n be found in ISO standards prepared by ISO Technical Committee 6, as well as other definitions which, in the opinion of Working Group 6, needed to be standardized. ISO 4046 consists of the following parts under the general title Paper, board, pulps and related terms Vocabulary: Part 1: Alphabetical
23、 index Part 2: Pulping terminology Part 3: Paper-making terminology Part 4: Paper and board grades and converted products Part 5: Properties of pulp, paper and board This second edition results from the reinstatement of the previous edition (ISO 4046-5:2002) which was withdrawn in 2014. BS ISO 4046-
24、5:2016ISO 4046-5:2016(E/F) iv ISO 2016 All rights reserved/Tous droits rservsAvant-propos LISO (Organisation internationale de normalisation) est une fdration mondiale dorganismes nationaux de normalisation (comits membres de lISO). Llaboration des Normes internationales est en gnral confie aux comi
25、ts techniques de lISO. Chaque comit membre intress par une tude a le droit de faire partie du comit technique cr cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec lISO, participent galement aux travaux. LISO collabore troitement avec la Commissio
26、n lectrotechnique internationale (CEI) en ce qui concerne la normalisation lectrotechnique. Les Normes internationales sont rdiges conformment aux rgles donnes dans les Directives ISO/CEI, Partie 3. La tche principale des comits techniques est dlaborer les Normes internationales. Les projets de Norm
27、es internationales adopts par les comits techniques sont soumis aux comits membres pour vote. Leur publication comme Normes internationales requiert lapprobation de 75 % au moins des comits membres votants. Lattention est appele sur le fait que certains des lments de la prsente partie de lISO 4046 p
28、euvent faire lobjet de droits de proprit intellectuelle ou de droits analogues. LISO ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et averti de leur existence. LISO 4046-5 a t labor par le comit technique ISO/TC 6, Papiers, cartons et ptes. LISO 4046-1, lIS
29、O 4046-2, lISO 4046-3, lISO 4046-4 et lISO 4046-5 annulent et remplacent lISO 4046:1978. De nombreux nouveaux termes ont t dfinis dans cette nouvelle srie de normes depuis la publication de lISO 4046:1978. Cependant, la srie de normes ISO 4046 ne constitue pas une liste complte des termes relatifs a
30、ux papiers, cartons et ptes. Elle inclut les dfinitions de termes qui se trouvent dans les normes ISO prpares par le comit technique 6 de lISO, ainsi que celles dautres termes qui, selon le groupe de travail 6, devaient tre normaliss. LISO 4046 comprend les parties suivantes, prsentes sous le titre
31、gnral Papier, carton, ptes et termes connexes Vocabulaire: Partie 1: Index alphabtique Partie 2: Terminologie de la fabrication de la pte Partie 3: Terminologie de la fabrication du papier Partie 4: Catgories et produits transforms de papier et de carton Partie 5: Proprits de la pte, du papier et du
32、 carton Cette deuxime dition rsulte du rtablissement de ldition prcdente (ISO 4046-5:2002) qui avait t supprime en 2014. BS ISO 4046-5:2016ISO 4046-5:2016(E/F) ISO 2016 All rights reserved/Tous droits rservs vIntroduction This part of ISO 4046 defines terms, in English and French, related to paper,
33、board and pulps, and their properties and processes. It is part of the ISO 4046 series of standards, which document the terminology of paper, board, pulp and related terms. The layout of this standard is based on ISO 10241:1992. The following information will facilitate the use of this part of ISO 4
34、046. a) Entry items are listed in alphabetical order of the English terms. The equivalent French term is listed in the adjacent column. b) In order to prepare the index for the ISO 4046 series of standards (ISO 4046-1), entry items are numbered 5.X, where “5.” indicates that the term is located in t
35、his part of ISO 4046, i.e. ISO 4046-5, and “X” is the entry number. c) Each entry item is structured as follows (but does not necessarily include all of these elements): preferred term or abbreviation COUNTRY SYMBOL, gender, (number) admitted term COUNTRY SYMBOL subject field definitionterm in anoth
36、er entrysource standard cf. term (used to reference related entries) NOTE Text of the note. d) In those cases where equivalent terms do not exist or have not been found to define a concept in both English and French, a five-dot symbol (. . . . .) is used to indicate the term in that language for whi
37、ch no term exists. e) Words which are terms defined in the ISO 4046 series are boldfaced in the body of a definition. Please refer to the global index (ISO 4046-1) to find these terms within the series of standards. f) If a given term designates more than one concept, these are treated as separate e
38、ntities and are differentiated by a number in brackets which follows the preferred term. g) English spellings are based on the Concise Oxford Dictionary (Oxford University Press). This part of ISO 4046 was prepared by Working Group 6 of Technical Committee 6 (ISO/TC 6/WG 6). This Working Group is co
39、ncerned with terminolog related to paper, board and pulps. BS ISO 4046-5:2016ISO 4046-5:2016(E/F) vi ISO 2016 All rights reserved/Tous droits rservsIntroduction La prsente partie de lISO 4046 dfinit les termes, en anglais et en franais, relatifs aux papiers, cartons et ptes et leurs proprits et proc
40、ds. Elle fait partie de la srie de normes ISO 4046, qui documente la terminologie du papier, du carton, des ptes et des termes connexes. La prsentation de la prsente norme est base sur lISO 10241:1992. Les informations suivantes facilitent lutilisation de la prsente partie de lISO 4046. a) Les artic
41、les sont numrs dans lordre alphabtique des termes anglais. Les termes franais quivalents sont inscrits dans la colonne adjacente. b) De faon prparer lindex gnral de la srie de normes ISO 4046 (ISO 4046-1), les articles sont numrots 5.X, o le 5 indique que larticle fait partie de la prsente partie de
42、 lISO 4046, cest-dire ISO 4046-5, et X est le numro de larticle. c) Chaque article est structur de la faon suivante (mais ninclut pas ncessairement tous ces lments): terme privilgi ou abrviation INDICATIF DE PAYS, genre, (nombre) terme tolr INDICATIF DE PAYS domaine dfinitionterme dun autre articles
43、ource / norme apparente cf. terme (utilis pour rfrer un article apparent) NOTE Texte de la note. d) Dans les cas o un terme quivalent nexiste pas ou na pas t trouv pour dfinir une notion, la fois en anglais et en franais, alors cinq points en ligne (. . . . .) sont utiliss pour reprsenter le terme d
44、ans la langue pour laquelle le terme nexiste pas. e) Les mots qui sont des termes dfinis dans la srie de normes ISO 4046 sont en caractres gras dans le corps dune dfinition. Veuillez consulter lindex gnral (ISO 4046-1) pour localiser ces termes dans la srie de normes ISO 4046. f) En cas de terme pol
45、ysmique, chaque notion fait lobjet dun article distinct. Ces termes sont aussi suivis dun chiffre entre parenthses qui suit le terme privilgi. g) Lorthographe des mots anglais est base sur celle du Concise Oxford Dictionnary (Oxford University Press). La prsente partie de lISO 4046 a t prpare par le
46、 groupe de travail 6 du comit technique 6 (ISO/TC 6/WG 6). Ce groupe de travail sintresse la terminologie relative aux papiers, cartons et ptes. BS ISO 4046-5:2016INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 4046-5:2016(E/F) ISO 2016 All rights reserved/Tous droits rservs 1Paper, board, pulps and
47、 related terms Vocabulary Part 5: Properties of pulp, paper and board Papier, carton, ptes et termes connexes Vocabulaire Partie 5: Proprits de la pte, du papier et du carton Scope This part of ISO 4046 defines terms related toproperties of pulp, paper and board, in both Englishand French. Domaine d
48、application La prsente partie de lISO 4046 dfinit des termesrelatifs aux proprits de la pte, du papier et ducarton, la fois en anglais et en franais. Terms and definitions Termes et dfinitions 5.1 absorbency the ability of a paper or board to take up and retain aliquid with which it is in contact NOTE Either the degree of absorbency or the rate of absorbency may be measured by standard test methods. 5.1 pouvoir absorbant, m aptitude dun papier
