1、PUBLISHED DOCUMENTPD CEN/TR 15019:2005Geotextiles and geotextile-relatedproducts On-site quality controlICS 59.080.70g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42
2、g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSIPD CEN/TR 15019:2005This Published Document was published under the authority of the Standards Policy and Strategy Committee on 22 February 2006 BSI 22 February 2006ISBN 0 580 46533 0National forewo
3、rdThis Published Document is the official English language version of CEN/TR 15019:2005.It is being issued as a Published Document and not a full standard because the European committee was unable to reach consensus on the content.The UK participation in its preparation was entrusted to Technical Co
4、mmittee B/553, Geosynthetics, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European de
5、velopments and promulgate them in the UK.This technical report was established as an advisory document for use in circumstances and locations where the engineering culture is less developed. It has little applicability to the United Kingdom where the position and authority of the engineer, the ICE C
6、onditions, the Contract Documents and Method Statement address and apportion the responsibilities for on-site control. Many of the recommendations in the technical report are not conducive to cost effective working required in modern construction processes and would, if followed, lead to delay and u
7、nnecessary costs.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogueunder the section entitled “In
8、ternational Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a
9、Published Document does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the CEN/TR title page, pages 2 to 16, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when th
10、e document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSITECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BERICHTCEN/TR 15019February 2005ICS 59.080.70English versionGeotextiles and geotextile
11、-related products - On-site qualitycontrolGotextiles et produits apparents - Contrle au chantier Geotextilien und geotextilverwandte Produkte -BaustellenkontrolleThis Technical Report was approved by CEN on 9 January 2005. It has been drawn up by the Technical Committee CEN/TC 189.CEN members are th
12、e national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.
13、EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN/TR 15019:2005: ELicensed C
14、opy: Wang Bin, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSICEN/TR 15019:20052ContentsPage Foreword31 Scope 42 Terms and definitions .42.1 design specification 42.2 product specification value 42.3 sample.42.4 specimen (test specimen).42.5 test result (of a sample) 42.6 test lot .42.7
15、 delivery lot 42.8 safety standard high52.9 safety standard normal .53 Principle54 Procedures .54.1 Evaluation of compliance of delivered product with the design specification (see Annex A.2) .54.2 Evaluation of compliance of site conditions with the delivered product (see Annex A.3) 54.3 Inspection
16、 of handling and storage conditions64.4 Inspection of product installation 64.5 Sampling for evaluation of compliance with the design specification (see Annex A 3 and A 4)64.5.1 Control of products delivered to the construction site .74.5.2 Control tests by the client.74.5.3 Test programme.74.6 Samp
17、le installation and extraction to check damage during installation84.7 Sample installation and extraction to check long-time behaviour .85 Evaluation of conformity with the design specifications 85.1 Evaluation of conformity by a simplified procedure85.2 Evaluation of conformity by statistic procedu
18、re 86 Consequences .96.1 Damage during transport, handling, storage and placing 96.2 Evaluation of conformity.97 Report .97.1 Part 1: report on site conditions and sampling (see Annex A.1 to A.4).97.2 Part 2: Report on test results, evaluation and consequences (see Annex A.5)10Annex A (informative)
19、ON SITE CONDITIONS AND SAMPLING: EXAMPLES OF REPORTS .11Bibliography 16Licensed Copy: Wang Bin, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSICEN/TR 15019:20053Foreword This document (CEN/TR 15019:2005) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretaria
20、t of which is held by IBN. Licensed Copy: Wang Bin, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSI41 Scope This document contains recommendations for on-site quality control of geotextiles and geotextile-related products as part of the site quality assurance system. It describes proced
21、ures for verifying that: the correct product is delivered to site; the product is handled and installed in the correct manner; the specifications are met. This document contains an annex showing five examples of report forms for use on the site and a bibliography. 2 Terms and definitions For the pur
22、poses of this document, the terms and definitions given in prEN ISO 10318 and the following apply. The term “product“ used in this document refers to a geotextile or geotextile-related product. 2.1 design specification document which defines the application in which the product is to be used and whe
23、re the functions, the characteristics and the design specification values of the characteristics required for use in the works are stated 2.2 product specification value value of a product characteristic as stated by the manufacturer, e.g. in the accompanying documents for CE marking. This value rep
24、resents the mean value minus (and/or plus) one time the tolerance value(s) corresponding to the 95 % confidence level (as defined e.g. in EN 13249:2000, 5.2). By extension, this definition can also be applied to other characteristics described in Table 1 of the relevant product/application standard
25、(see bibliography) and also to characteristics such as mass per unit area and thickness 2.3 sample part of the product, taken over the whole width, from which specimens are taken for testing 2.4 specimen (test specimen) part of the sample used for an individual test 2.5 test result (of a sample) mea
26、n of the results obtained on the specimens tested 2.6 test lot quantity of products considered as one unit for sampling and testing. This can be the total area to be covered by the product in the works 2.7 delivery lot quantity of product delivered on site in a given period of time, which can be sub
27、mitted to a single approval. Delivery lots are evaluated independently of each other CEN/TR 15019:2005Licensed Copy: Wang Bin, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSI52.8 safety standard high application where long-term strength is a significant parameter and/or where the produc
28、t plays a decisive role in the safety of the construction and the stability of the works, e.g. reinforcement (Eurocode 7 class 2) 2.9 safety standard normal all other applications than those defined under 2.9 (Eurocode 7 class 1) 3 Principle The on-site quality control may consist of one or more of
29、the following actions: evaluation of the compliance of a delivered product with the design specification (see 4.1); evaluation of the compliance of site-conditions with delivered product (see 4.2); inspection of handling and storage conditions (see 4.3); inspection of product installation (see 4.4);
30、 taking samples for evaluation of compliance with the design specification (see 4.5); placing and extracting control samples to check damage during installation (see 4.6); placing control samples to check the behaviour with time (see 4.7). 4 Procedures 4.1 Evaluation of compliance of delivered produ
31、ct with the design specification (see Annex A.2) The following should be completely checked and documented by the contractor and randomly supervised by the client immediately after delivery: is the product marking and the information affixed to the unit in accordance with EN ISO 10320? is the CE-mar
32、king affixed to each unit? is the information required in Table 1 of the relevant product/application standard available? is the product in accordance with the purchase order and the delivery note? are the specification values of the product in accordance with the design specification? is the delive
33、red product by the values tested conform with the design specification? 4.2 Evaluation of compliance of site conditions with the delivered product (see Annex A.3) Generally, the actual site conditions fit with the design of the structure, but unforeseen circumstances may jeopardize this. In case the
34、y are not complying with the design and the specifications, the contractor and the client should check, before installation of the product, if the product characteristics meet the actual site conditions. As an example, they should check the compliance of the product characteristics with: CEN/TR 1501
35、9:2005Licensed Copy: Wang Bin, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSI6 soils to be covered with fill material on site (influence on damage during installation, chemical factors e.g. by high or low pH); method of placing and compacting the fill (influence on damage during instal
36、lation); stress by site traffic (rutting) ; influence of site conditions on the behaviour and the durability of the product. 4.3 Inspection of handling and storage conditions Site handling of the units (rolls or packages) should comply with the recommendations of the manufacturer and one should ensu
37、re that damage to the product e.g. surface abrasion, slitting, notching or tearing is prevented (see Annex A.2). This should be checked by the contractor and at random by the client. Products should be stored in accordance with the manufacturers instructions. Prolonged exposure to weathering should
38、be prevented by storage under cover or in the original packaging supplied by the manufacturer. If the product is damaged: see 6. 6.1. 4.4 Inspection of product installation During installation, it should be checked by the contractor and at random by the client, that the installation of the product i
39、s consistent with the design/drawings and specification (see Annex A.2 and A.3), i.e. that: product is laid as shown on the drawings or as described in the specification (e.g. installation plan); machine direction of the product is placed according to the design; there is sufficient overlapping betw
40、een rolls; direction of overlapping is correct; joints or seams are applied where necessary; product is used “top-side up“ ( with the correct side against soil/building). Products, whose functional properties can be affected by water, should be installed under dry circumstances. Products, which can
41、be damaged by freezing (vegetation mats, etc.), should be installed when the temperature is above freezing point. 4.5 Sampling for evaluation of compliance with the design specification (see Annex A 3 and A 4) Tests are proposed for evaluation of compliance with the design specification. The contrac
42、tor therefore should implement a quality control procedure of products delivered to the construction site (see 4.5.1). If the client requires additional control tests to identify the product delivered to site and its compliance with the specification, these tests should be specified in the contract
43、documents (see 4.5.2). The area of product to be included in each test or delivery lot has to be agreed between all contractual parties involved. The samples should be taken well in advance to allow obtaining the test results at the latest on the day of installation. The evaluation procedure is give
44、n in chapter 5 and the actions, which result in chapter 6. The number of samples and selection procedure should be defined in the contract documents. The number of samples required should be a function of: importance of the product for the safety of the works; CEN/TR 15019:2005Licensed Copy: Wang Bi
45、n, na, Fri May 12 03:09:04 BST 2006, Uncontrolled Copy, (c) BSI7 area of product used in the works. 4.5.1 Control of products delivered to the construction site Samples to determine product compliance with the specification should be taken by the contractor together with the supplier of the product.
46、 The testing of the materials delivered to the construction site is the responsibility of the contractor. Number of samples required: a) safety standard “high“ applications: 1 sample every 6 000 m, with a minimum of 2 samples above 1 000 m b) safety standard “normal“ applications: 1 sample every 10
47、000 m, with a minimum of 1 sample above 1 000 m These control tests can be omitted, if the product is certified on the basis of a voluntary certification system where the following tasks are performed by the conformity assessment body: initial type testing of the product; initial inspection of the p
48、roduction and of the factory production control; continuous surveillance, assessment and approval of the factory production control; audit testing of specimens sampled in the factory, in the market or on the construction site. 4.5.2 Control tests by the client Control tests are the responsibility of
49、 the client. Samples should be taken by a representative of the client, a conformity assessment body or a representative of an inspection body, together with the contractor at random from a delivery lot, to determine the identity of the product and its compliance with the design specification.Number of samples required for control tests: a) safety level “high“ applications : 1 sample every 30 000 m, with a minimum of 1 test above 1 000 m b) safety level “normal“ applications : 1 sample every 50 000 m,
