1、 CAN/CGSB-4.2 No. 22-2004 Supersedes CAN/CGSB-4.2 No. 22-M90 Reaffirmed November 2013 National Standard of Canada ICS 59.080.01 Textile test methods Colourfastness to rubbing (Crocking) The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed, is a governmen
2、t agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests i
3、ncluding producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited
4、by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes
5、 as National Standards of Canada, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy an
6、d Procedures Manual for the Development and Maintenance of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. CGSB will initiate the review of this standard within five years of the date of publication. Suggestions for their impro
7、vement, which are always welcome, should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, an
8、d ordering instructions, is found in the CGSB Catalogue at our Web site www.tpsgc-pwgsc.gc.ca/ ongc-cgsb along with more information about CGSB products and services. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the respon
9、sibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects assoc
10、iated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for a
11、ny injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Us
12、ers of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Standards Division Canadian General Standards Board Gatineau, Can
13、ada K1A 1G6 The Standards Council of Canada (SCC) is the coordinating body of the Canadian standardization network, which is composed of people and organizations involved in the development, promotion and implementation of standards. Through the collaborative efforts of Canadian standardization netw
14、ork members, standardization is helping to advance the social and economic well-being of Canada and to safeguard the health and safety of Canadians. The networks efforts are overseen by SCC. The principal objectives of SCC are to foster and promote voluntary standardization as a means of advancing t
15、he national economy, supporting sustainable development, benefiting the health, safety and welfare of workers and the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in relation to standardization. An important fa
16、cet of the Canadian standards development system is the use of the following principles: consensus; equal access and effective participation by concerned interests; respect for diverse interests and identification of those who should be afforded access to provide the needed balance of interests; mec
17、hanism for dispute resolution; openness and transparency; open access by interested parties to the procedures guiding the standards development process; clarity with respect to the processes; and Canadian interest consideration as the initial basis for the development of standards. A National Standa
18、rd of Canada (NSC) is a standard prepared or reviewed by an SCC-accredited SDO and approved by the SCC according to NSC approval requirements. Approval does not refer to the technical content of the standard, as this remains the responsibility of the SDO. An NSC reflects a consensus of a number of c
19、apable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers) and others with relevant interests, as may be appropriate to the subject at hand. NSCs are intended to make
20、a significant and timely contribution to the Canadian interest. Those who have a need to apply standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO that publishes the standard. The responsibility f
21、or approving standards as NSCs rests with: Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7, CANADA How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage
22、 Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctpsgc-pwgsc.gc.ca on the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb NATIONAL STANDARD OF CANADA CAN/CGSB-4.2 No. 22-2004 Supersedes CAN/CGSB-4.2 No. 22-M90 Reaffirmed November 2013 Textile test methods Colourfastness to rubbing (Crock
23、ing) CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE ET ANGLAISE. Published June 2004 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Public Works and Government Services, the Minister re
24、sponsible for the Canadian General Standards Board (2004). No part of this publication may be reproduced in any form without the prior permission of the publisher. Prepared by the Canadian General Standards Board Approved by the CAN/CGSB-4.2 No. 22-2004 CGSB 2013 All rights reserved CANADIAN GENERAL
25、 STANDARDS BOARD Committee on Textile Test Methods and Terminology (Voting membership at date of reaffirmation) General interest category Batcheller, J. University of Alberta Carrick, D. Consultant Davie, N. Consultant Liu, S. University of Manitoba Man, T.M. Consultant Tait, C. National Defence/DSS
26、PM Producer category Adam, C. Tencate Protective Fabrics Canada Boivin, D. E.I. DuPont Co. Lawson, L. Davey Textile Solutions Leblanc, J.-M. Marv Holland Apparel Ltd. Schumann, E. Lincoln Fabrics Ltd. Taylor, V. Invista (Canada) Co. Regulator category Andersson, C. Health Canada User category Bourge
27、t, S. National Defence/QETE DEntremont, E. Royal Canadian Mounted Police Izquierdo, V. Textile Technologies Centre Kohli, G. Sears Canada Inc. Larsen, A.-L. Exova Group Ltd. Litva, M. Canada Border Services Agency MacLeod, J. Public Works and Government Services Canada Tebbs, C. International Drycle
28、aners Congress Secretary (non-voting) Grabowski, M. Canadian General Standards Board Acknowledgment is made for the translation of this National Standard of Canada by the Translation Bureau of Public Works and Government Services Canada. CGSB 2013 All rights reserved i CAN/CGSB-4.2 No. 22-2004 Super
29、sedes CAN/CGSB-4.2 No. 22-M90 Reaffirmed November 2013 Preface to the National Standard of Canada This National Standard of Canada has been reaffirmed by the CGSB Committee on Textile Test Methods and Terminology. Editorial changes have been made by the correction of the following paragraph: 9.2.1 T
30、he publications referred to in par. 3.1.1 may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740. E-mail ncr.cgsb-ongctpsgc-pwgsc.gc.ca. Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb.National Standard o
31、f CanadaTEXTILE TEST METHODS CAN/CGSB-4.2GatineauCanadaK1A 1G6Colourfastness to Rubbing(Crocking)No. 22-2004Supersedes CAN/CGSB-4.2No. 22-M90FOREWORDThe dry and wet test portions of this method are similar to the International Standard ISO 105-X12:2001, Textiles Tests for colour fastness Part X12: C
32、olour fastness to rubbing, except that the ISO standard provides twoalternative sizes of rubbing finger, one for pile fabric and one for other textiles. The Canadian method uses only onesize of rubbing finger. The portion requiring use of dry cleaning solvent is similar to ISO 105-D02:1993, Textiles
33、 Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents, except that the Canadianmethod permits only one type of solvent.1. PURPOSE AND SCOPE1.1 This method assesses the resistance of the colour of textile materials to rubbing off in the dry state or in the presenceof moist
34、ure or solvent. Such rubbing off of colour may result in fading or streaking, and/or staining of othermaterials.1.2 This method is not recommended for the testing of carpets. A method assessing the colourfastness to crocking ofcarpets may be found in CAN/CGSB-4.161, Appendix B.1.3 The testing and ev
35、aluation of a product against this method may require the use of materials and/or equipment thatcould be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyoneusing this method has the responsibility to consult the appropriate authorities and to e
36、stablish appropriate health andsafety practices in conjunction with any applicable regulatory requirements prior to its use.1.4 Washing, drycleaning, ironing, finishing, etc. may affect the degree of colour transfer from a material. The test maybe done before, after, or before and after any such tre
37、atment.2. PRINCIPLE2.1 Specimens of the textile are rubbed with dry undyed cotton cloth and/or with undyed cotton cloth wetted with wateror solvent. The staining of the undyed cloth is evaluated by reference to the Grey Scale for evaluating staining or tothe AATCC Chromatic Transference Scale.3. REF
38、ERENCED PUBLICATIONS3.1 The following publications are referenced in this method:3.1.1 Canadian General Standards Board (CGSB)CAN/CGSB-4.2 Textile Test Methods:No. 2 Conditioning Textile Materials for TestingNo. 47/ISO 105-A03 Textiles Tests for Colourfastness Part A03: Grey Scale for Assessing Stai
39、ningNo. 64 Chromatic Transference Scale.3.2 A dated reference in this method is to the issue specified. An undated reference in this method is to the latest issue,unless otherwise specified by the authority applying this method. The sources are given in the Notes section.1ReaffirmedNovember 20134. A
40、PPARATUS4.1 Device: capable of applying, against a firmly held specimen of fabric, a force of 9 N through a cylindrical finger16 mm in diameter,1while moving this finger back and forth along a line 100 mm in length. The AATCC“Crockmeter” provides this action and is shown in Figure 1.2This apparatus
41、is provided with an abrasive papersurface on which the specimen is placed to hold it in position and prevent slipping during the test; it is also providedwith a spiral wire clip to hold the undyed test cloth in place on the cylindrical finger.34.1.1 Accidental damage to the abrasive paper, spiral cl
42、ip or rubbing finger should be repaired as follows: neatly renewthe abrasive paper; bend the clip further open or shut over an inserted rod of the correct diameter, as required;resurface the finger by movement on an extra piece of fine emery cloth in a manner simulating regular use.4.2 Bleached undy
43、ed cotton cloth: 50 mm squares free from starch or other finishes, having a mass and constructionapproximating that of cotton lawn.44.3 Tetrachloroethylene (Perchloroethylene)54.4 Grey Scale: for assessing staining in accordance with CAN/CGSB-4.2 No. 47/ISO 105-A03.4.5 AATCC Chromatic Transference S
44、cale:6for assessing the extent of transference of colour in accordance withCAN/CGSB-4.2 No. 64.4.6 Distilled or deionized water.5. TEST SPECIMENS5.1 If the textile to be tested is fabric, two specimens not less than 50 150 mm shall be taken for dry rubbing and twofor each type of wet rubbing. One sp
45、ecimen of each pair shall be cut lengthwise of the fabric and the othercrosswise. Insofar as possible, the specimens shall be representative of all colours of multicolour fabric.5.2 If the textile to be tested is a yarn or thread, it shall be knitted into cloth of suitable dimensions (par. 5.1) or a
46、 layerof parallel strands shall be formed by wrapping it lengthwise on a cardboard rectangle of suitable dimensions.5.3 If the textile to be tested is in the form of loose fibres, a test specimen shall be prepared by laying tufts of fibresparallel to the long dimension of the specimen to make a pad
47、50 150 mm and 10 mm thick in the uncompressedstate. The pad shall then be compressed and sewn with undyed cotton thread to a piece of undyed cotton fabric, withthe seams parallel to the short dimension of the specimen and spaced approximately 20 mm apart.6. PROCEDURE6.1 For Dry Rubbing Condition the
48、 specimens and the bleached undyed cloth in accordance with CAN/CGSB-4.2No. 2. Place the test specimen in position on the abrasive paper surface with the face of the fabric up, unless1For use in the testing of yarns and thread, a yarn testing finger is available from R.B. Atlas Company, 9 Canso Driv
49、e, Rexdale,Ontario M9W 4L9. This finger was developed to avoid the tendency of the standard finger to dig into the sample and giveerroneous results. The finger is acrylic, 25 mm in diameter by 51 mm long. Positioned on its side and held in place by thestandard finger, it provides a wider test area and presents the sample with rounded surfaces. The standard crocking cloth isused but is held in place by two spring loaded clips.2The Crockmeter may be obtained from the R.B. Atlas Company. It is described in Method 8 in the AATCC Technical Manu
