1、CAN/CGSB-4.2 No. 26.2-94/ ISO 4920:1981Supersedes CAN/CGSB-4.2 No. 26.2-M87 Reaffirmed December 2003 Reaffirmed November 2012Textile test methodsTextile fabrics Determination of resistance to surface wetting (spray test) (ISO 4920:1981, IDT)(The International Standard ISO 4920:1981 is adopted withou
2、t modifications (IDT) as a CGSB Standard CAN/CGSB-4.2 No. 26.2-94/ISO 4920:1981 and has been approved as a National Standard of Canada by the Standards Council of Canada.)ICS 59.080.30National Standard of CanadaInternational Organization for StandardizationThe CANADIAN GENERAL STANDARDS BOARD (CGSB)
3、, under whose auspices this National Standard of Canada has been developed is a government agency within Public Works and Government Services Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus
4、process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is develop
5、ed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established f
6、or this purpose by the Standards Council of Canada. In addition to standards it publishes as national standards, CGSB produces standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards
7、 are developed in conformance with the policies described in the CGSB Policy Manual for the Development and Review of Standards. CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. Suggestions for their improvement, which are always welcome,
8、should be brought to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found
9、in the CGSB Catalogue, which is published annually and is available without charge upon request. More information is available about CGSB products and services at our Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb. Although the intended primary application of this standard is stated in its Scope, it is im
10、portant to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purpo
11、rt to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither as
12、sumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for ide
13、ntifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Standards Division Cana
14、dian General Standards Board Gatineau, Canada K1A 1G6 The STANDARDS COUNCIL OF CANADA is the coordinating body of the National Standards System, a coalition of independent, autonomous organizations working towards the further development and improvement of voluntary standardization in the national i
15、nterest. The principal objects of the SCC are to foster and promote voluntary standardization as a means of advancing the national economy, benefiting the health, safety and welfare of the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering in
16、ternational cooperation in the field of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an accredited Standards Development Organization (SDO) and approved by the SCC according to the requirements of CAN-P-2. Approval does not refer to the technical content of th
17、e standard; this remains the continuing responsibility of the SDO. A NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest practicable extent, a balance of representation of general interests, producers, regulators, users (including consumers
18、), and others with relevant interests, as may be appropriate to the subject in hand. It normally is a standard, which is capable of making a significant and timely contribution to the national interest. Those who have a need to apply standards are encouraged to use NSCs. These standards are subject
19、to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO, which publishes the standard. The responsibility for approving standards as National Standards of Canada rests with the: Standards Council of Canada 200-270 Albert Street Ottawa, Ontario K1P 6N7 How to order P
20、ublications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctpsgc-pwgsc.gc.ca on the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb NATIONAL STA
21、NDARD OF CANADA CAN/CGSB-4.2 No. 26.2-94/ ISO 4920:1981Supersedes CAN/CGSB-4.2 No. 26.2-M87 Reaffirmed December 2003 Reaffirmed November 2012Textile test methods Textile fabrics Determination of resistance to surface wetting (spray test) (ISO 4920:1981, IDT)(The International Standard ISO 4920:1981
22、is adopted without modifications (IDT) as a CGSB Standard CAN/CGSB-4.2 No. 26.2-94/ISO 4920:1981 and has been approved as a National Standard of Canada by the Standards Council of Canada.)NATIONAL STANDARD OF CANADA CAN/CGSB-3.14-2006Reviewed by the Approved by the Canadian General Standards Board S
23、tandards Council of CanadaPublished September 1994 by the Canadian General Standards Board Gatineau, Canada K1A 1G6Minister of Public Works and Government Services Canada 1994 No part of this publication may be reproduced in any form without the prior permission of the publisher. COPYRIGHT, ISO 1981
24、. All rights reserved. NOT FOR RESALE. Prepared by the International Organization for StandardizationCETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONSFRANAISE ET ANGLAISE.CAN/CGSB-4.2No. 26.2-94/ISO 4920:1981 CANADIAN GENERAL STANDARDS BOARDCommittee on Textile Test Methods and Terminology(
25、Voting membership at date of reaffirmation)General Interest CategoryBatcheller, J. University of AlbertaCarrick, D. ConsultantDavie, N. ConsultantLiu, S. University of ManitobaMan, T.M. ConsultantTait, C. National Defence/DSSPMProducer CategoryAdam, C. PGI/Difco Performance Fabrics Inc.Bowen, D. DuP
26、ont Protection TechnologiesLawson, L. Walls Apparel Canada Inc.Leonard, D. Invista (Canada) Co.Schumann, E. Lincoln Fabrics Ltd.Zukowsky, D. Marv Holland Apparel Ltd.Regulator CategoryAndersson, C. Health CanadaUser CategoryBourget, S. National Defence/QETEHong, T. Exova Group Ltd.Izquierdo, V. Text
27、ile Technologies CentreLitva (Scalzo), M. Canada Border Services AgencyMacLeod, J. Public Works and Government Services CanadaSirimanna, A. Sears Canada Inc.Tebbs, C. International Drycleaners CongressSecretary (non-voting)Grabowski, M. Canadian General Standards BoardCAN/CGSB-4.2 No. 26.2-94/ ISO 4
28、920:1981 Supersedes CAN/CGSB-4.2 No. 26.2-M87 Reaffirmed December 2003 Reaffirmed November 2012Preface to the National Standard of CanadaThis National Standard of Canada has been reaffirmed by the CGSB Committee on Textile Test Methods and Terminology. It is identical in content and in layout with I
29、nternational Standard ISO 4920, Textile fabrics Determination of resistance to surface wetting (spray test), published 1981-05-01 by the International Organization for Standardization (ISO), and is reprinted with the permission of ISO. The international standard was reviewed by the CGSB committee to
30、 determine its suitability for Canadian use. It was agreed to use it in total, without editorial changes.Throughout this standard, the words “National Standard of Canada” are to be understood as replacing the words “International Standard” wherever they appear.Some terminology and conventions are no
31、t identical to those used in other test methods within CAN/CGSB-4.2 Textile Test Methods. For example, the comma is used throughout this standard as a decimal marker rather than the point.The following National Standard of Canada corresponds to the referenced ISO standard:CANADA ISOCAN/CGSB-4.2 No.
32、2 ISO 139The testing and evaluation of a product against this method may require the use of materials and equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this method has the responsibility to consult the approp
33、riate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherever performed.The
34、 CGSB National Standards of Canada may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819-956-0425 or 1-800-665-2472. Fax 819-956-5740.The International Standards may be obtained from IHS Canada, 1 Antares Drive, Suite 200, Ottawa, Ontario K2
35、E 8C4. Telephone 613-237-4250 or 1-800-267-8220. Fax 613-237-4251. The ISO photographic scale in the Annex is for information only and should not be used for actual ratings. The actual scale should be used for ratings.The ISO photographic scale is available from AATCC, 1 Davis Drive, P.O. Box 12215,
36、 Research Triangle Park, NC 27709-2215, U.S.A. Telephone 919-549-8141. Fax 919-549-8933.iNo. 26.2-94 12 No. 26.2-94No. 26.2-943 2 No. 26.2-94No. 26.2-943 Copyright NoticeThis standard contains information copyright-protected by the International Organization for Standardization (ISO) or, where appro
37、priate the International Electrotechnical Commission (IEC). Except as permitted under the Laws of Canada, no extract of the International Standard may be reproduced, stored in any retrieval system or transmitted in any form or by any means, electronic, photocopying, recording or otherwise, without p
38、rior written permission from SCC. Requests for permission to reproduce the International Standard or parts thereof should be addressed to:Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario KlP 6N7 Telephone 613-238-3222COPYRIGHT VIOLATORS WILL BE PROSECUTED TO THE FULL EXTENT OF THE LAW.
