CAN CGSB-4 2 NO 3-M88-1988 Textile Test Methods Determination of Moisture in Textiles.pdf

上传人:dealItalian200 文档编号:589291 上传时间:2018-12-15 格式:PDF 页数:10 大小:899.13KB
下载 相关 举报
CAN CGSB-4 2 NO 3-M88-1988 Textile Test Methods Determination of Moisture in Textiles.pdf_第1页
第1页 / 共10页
CAN CGSB-4 2 NO 3-M88-1988 Textile Test Methods Determination of Moisture in Textiles.pdf_第2页
第2页 / 共10页
CAN CGSB-4 2 NO 3-M88-1988 Textile Test Methods Determination of Moisture in Textiles.pdf_第3页
第3页 / 共10页
CAN CGSB-4 2 NO 3-M88-1988 Textile Test Methods Determination of Moisture in Textiles.pdf_第4页
第4页 / 共10页
CAN CGSB-4 2 NO 3-M88-1988 Textile Test Methods Determination of Moisture in Textiles.pdf_第5页
第5页 / 共10页
亲,该文档总共10页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 Textile test methods Determination of moisture in textiles Mthodes pour preuves textiles Dtermination de lhumidit dans les textiles National Standard of Canada Norme nationale du Canada CAN/CGSB-4.2 No./No3-M88 Supersedes/Remplace CAN/CGSB-4.2 Method/Mthode 3 July/Juillet 1977 Extended/Prolonge Dec

2、ember/Dcembre 1993 Reaffirmed/Confirme April/Avril 2002 Reaffirmed/Confirme October/Octobre 2013 ICS 59.080.01 The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed, is a government agency within Public Works and Government Services Canada. CGSB is engage

3、d in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users, retailers, governments, educ

4、ational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives. CGSB has been accredited by the Standards Council of Canada as a national standards-development orga

5、nization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as National Standards of Canada, CGSB produces standards to meet particula

6、r needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy and Procedures Manual for the Development and Maintenance of Standards. CGSB

7、standards are subject to review and revision to ensure that they keep abreast of technological progress. CGSB will initiate the review of this standard within five years of the date of publication. Suggestions for their improvement, which are always welcome, should be brought to the notice of the st

8、andards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards. An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in the CGSB Catalogue at our Web site www

9、.tpsgc-pwgsc.gc.ca/ ongc-cgsb along with more information about CGSB products and services. Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their pa

10、rticular purpose. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to co

11、nsult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur during or as the result of tests, wherev

12、er performed. Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validi

13、ty of any such patent rights is entirely their own responsibility. Further information on CGSB and its services and standards may be obtained from: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 The Standards Council of Canada (SCC) is the coordinating body

14、of the Canadian standardization network, which is composed of people and organizations involved in the development, promotion and implementation of standards. Through the collaborative efforts of Canadian standardization network members, standardization is helping to advance the social and economic

15、well-being of Canada and to safeguard the health and safety of Canadians. The networks efforts are overseen by SCC. The principal objectives of SCC are to foster and promote voluntary standardization as a means of advancing the national economy, supporting sustainable development, benefiting the hea

16、lth, safety and welfare of workers and the public, assisting and protecting the consumer, facilitating domestic and international trade, and furthering international cooperation in relation to standardization. An important facet of the Canadian standards development system is the use of the followin

17、g principles: consensus; equal access and effective participation by concerned interests; respect for diverse interests and identification of those who should be afforded access to provide the needed balance of interests; mechanism for dispute resolution; openness and transparency; open access by in

18、terested parties to the procedures guiding the standards development process; clarity with respect to the processes; and Canadian interest consideration as the initial basis for the development of standards. A National Standard of Canada (NSC) is a standard prepared or reviewed by an SCC-accredited

19、SDO and approved by the SCC according to NSC approval requirements. Approval does not refer to the technical content of the standard, as this remains the responsibility of the SDO. An NSC reflects a consensus of a number of capable individuals whose collective interests provide, to the greatest prac

20、ticable extent, a balance of representation of general interests, producers, regulators, users (including consumers) and others with relevant interests, as may be appropriate to the subject at hand. NSCs are intended to make a significant and timely contribution to the Canadian interest. Those who h

21、ave a need to apply standards are encouraged to use NSCs. These standards are subject to periodic review. Users of NSCs are cautioned to obtain the latest edition from the SDO that publishes the standard. The responsibility for approving standards as NSCs rests with: Standards Council of Canada 270

22、Albert Street, Suite 200 Ottawa, Ontario K1P 6N7, CANADA How to order Publications: by telephone 819-956-0425 or 1-800-665-2472 by fax 819-956-5740 by mail CGSB Sales Centre Gatineau, Canada K1A 1G6 in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebec by email ncr.cgsb-ongctp

23、sgc-pwgsc.gc.ca on the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb La prsente norme a t labore sous les auspices de lOFFICE DES NORMES GNRALES DU CANADA (ONGC), qui est un organisme relevant de Travaux publics et Services gouvernementaux Canada. LONGC participe la production de normes facultatives dans une

24、gamme tendue de domaines, par lentremise de ses comits des normes qui se prononcent par consensus. Les comits des normes sont composs de reprsentants des groupes intresss aux normes ltude, notamment les producteurs, les consommateurs et autres utilisateurs, les dtaillants, les gouvernements, les ins

25、titutions denseignement, les associations techniques, professionnelles et commerciales ainsi que les organismes de recherche et dessai. Chaque norme est labore avec laccord de tous les reprsentants. Le Conseil canadien des normes a confr lONGC le titre dorganisme dlaboration de normes nationales. En

26、 consquence, les normes que lOffice labore et soumet titre de Normes nationales du Canada se conforment aux critres et procdures tablis cette fin par le Conseil canadien des normes. Outre la publication de normes nationales, lONGC rdige galement des normes visant des besoins particuliers, la demande

27、 de plusieurs organismes tant du secteur priv que du secteur public. Les normes de lONGC et les normes nationales de lONGC sont conformes aux politiques nonces dans le Manuel des politiques et des procdures pour llaboration et le maintien des normes de lONGC. tant donn lvolution technique, les norme

28、s de lONGC font lobjet de rvisions priodiques. LONGC entreprendra le rexamen de la prsente norme dans les cinq annes suivant la date de publication. Toutes les suggestions susceptibles den amliorer la teneur sont accueillies avec grand intrt et portes lattention des comits des normes concerns. Les c

29、hangements apports aux normes font lobjet de modificatifs distincts ou sont incorpors dans les nouvelles ditions des normes. Une liste jour des normes de lONGC comprenant des renseignements sur les normes rcentes et les derniers modificatifs parus, et sur la faon de se les procurer figure au Catalog

30、ue de lONGC disponible sur notre site Web www.tpsgc-pwgsc.gc.ca/ ongc-cgsb ainsi que des renseignements supplmentaires sur les produits et les services de lONGC. Mme si lobjet de la prsente norme prcise lapplication premire que lon peut en faire, il faut cependant remarquer quil incombe lutilisateur

31、, au tout premier chef, de dcider si la norme peut servir aux fins quil envisage. La mise lessai et lvaluation dun produit en regard de la prsente norme peuvent ncessiter lemploi de matriaux ou dquipement susceptibles dtre dangereux. Le prsent document nentend pas traiter de tous les aspects lis la

32、scurit de son utilisation. Il appartient lusager de la norme de se renseigner auprs des autorits comptentes et dadopter des pratiques de sant et de scurit conformes aux rglements applicables avant de lutiliser. LONGC nassume ni naccepte aucune responsabilit pour les blessures ou les dommages qui pou

33、rraient survenir pendant les essais, peu importe lendroit o ceux-ci sont effectus. Il faut noter quil est possible que certains lments de la prsente norme canadienne soient assujettis des droits confrs un brevet. LONGC ne peut tre tenu responsable de nommer un ou tous les droits confrs un brevet. Le

34、s utilisateurs de la norme sont informs de faon personnelle quil leur revient entirement de dterminer la validit des droits confrs un brevet. Pour de plus amples renseignements sur lONGC, ses services et les normes en gnral, prire de communiquer avec: Le Gestionnaire Division des normes Office des n

35、ormes gnrales du Canada Gatineau, Canada K1A 1G6 Le Conseil canadien des normes (CCN) est le coordonnateur du rseau canadien de normalisation, lequel est compos de personnes et dorganismes qui participent llaboration, la promotion et la mise en oeuvre des normes. Grce aux efforts conjugus des membre

36、s du rseau canadien de normalisation, les travaux de normalisation contribuent amliorer le bien-tre collectif et conomique du Canada et protger la sant et la scurit des Canadiens. Le CCN veille au bon droulement des activits du rseau. Les principaux objectifs du CCN sont dencourager et de favoriser

37、une normalisation volontaire en vue de faire progresser lconomie nationale, de contribuer au dveloppement durable, damliorer la sant, la scurit et le bien-tre des travailleurs et du public, daider et de protger le consommateur, de faciliter le commerce intrieur et extrieur et de dvelopper la cooprat

38、ion internationale en matire de normalisation. Un aspect important du systme canadien dlaboration de normes est lapplication des principes suivants : consensus; galit daccs et participation efficace des parties concernes; respect des divers intrts et dtermination des intrts auxquels il faudrait donn

39、er accs au processus afin dassurer lquilibre ncessaire entre les intrts; mcanisme de rglement des diffrends; ouverture et transparence; libert daccs des parties intresses aux procdures qui orientent le processus dlaboration de normes; clart des processus; prise en compte de lintrt du Canada comme fo

40、ndement initial de llaboration des normes. Une Norme nationale du Canada (NNC) est une norme qui a t prpare ou examine par un organisme dlaboration de normes (OEN) accrdit et approuve par le CCN au regard des exigences dapprobation des NNC. Lapprobation ne porte pas sur le contenu technique de la no

41、rme, cet aspect demeurant la responsabilit de lOEN. Une NNC reflte un consensus parmi les points de vue dun certain nombre de personnes comptentes dont les intrts runis forment, dans la plus grande mesure possible, une reprsentation quilibre des intrts gnraux et de ceux des producteurs, des organism

42、es de rglementation, des utilisateurs (y compris les consommateurs) et dautres personnes intresses, selon le domaine vis. Les NNC ont pour but dapporter une contribution apprciable, en temps opportun, lintrt du Canada. Il est recommand aux personnes qui ont besoin dutiliser des normes de se servir d

43、es NNC. Ces normes font lobjet dexamens priodiques; cest pourquoi lon recommande aux utilisateurs de se procurer ldition la plus rcente de la norme auprs de lOEN qui la publie. La responsabilit dapprouver les normes comme NNC incombe au : Conseil canadien des normes 270, rue Albert, bureau 200 Ottaw

44、a (Ontario) K1P 6N7 CANADA Comment commander des publications de l : par tlphone 819-956-0425 ou 1-800-665-2472 par tlcopieur 819-956-5740 par la poste Centre des ventes de lONGC Gatineau, Canada K1A 1G6 en personne Place du Portage Phase III, 6B1 11, rue Laurier Gatineau (Qubec) par courrier ncr.cg

45、sb-ongctpsgc-pwgsc.gc.ca lectronique sur le Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb CAN/CGSB-4.2 No./N 3-M88 Supersedes/Remplace CAN/CGSB-4.2 Method/Mthode 3 July/Juillet 1977 Extended/Prolonge December/Dcembre 1993 Reaffirmed/Confirme April/Avril 2002 Reaffirmed/Confirme October/Octobre 2013 National S

46、tandard of Canada Norme nationale du Canada Textile test methods Determination of moisture in textiles Mthodes pour preuves textiles Dtermination de lhumidit dans les textiles Published March 1988 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 Publie, mars 1988, par lOffice des nor

47、mes gnrales du Canada Gatineau, Canada K1A 1G6 Minister of Supply and Services Canada 1988 Ministre des Approvisionnements et Services Canada 1988No part of this publication may be reproduced in any formwithout the prior permission of the publisher. Aucune partie de cette publication ne peut tre rep

48、roduite daucune manire sans la permission pralable de lditeur. Prepared by the/Prpare par Canadian General Standards Board lOffice des normes gnrales du Canada Approved by the/Approuve par le CAN/CGSB-4.2 No./N 3-M88 CGSB 2013 All rights reserved ONGC 2013 Tous droits rservs CANADIAN GENERAL STANDARDS BOARD OFFICE DES NORMES GNRALES DU CANADA Committee on Textile Test Methods and Terminology Comit des mthodes pour preuves textiles et terminologie (Voting membership at

展开阅读全文
相关资源
猜你喜欢
  • BS EN 13687-1-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Freeze-thaw cycling with de-i.pdf BS EN 13687-1-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Freeze-thaw cycling with de-i.pdf
  • BS EN 13687-2-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Thunder-shower cycling (therm.pdf BS EN 13687-2-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Thunder-shower cycling (therm.pdf
  • BS EN 13687-3-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Thermal cycling without de-ic.pdf BS EN 13687-3-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Thermal cycling without de-ic.pdf
  • BS EN 13687-4-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Dry thermal cycling《混凝土结构的防护和.pdf BS EN 13687-4-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Dry thermal cycling《混凝土结构的防护和.pdf
  • BS EN 13687-5-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Resistance to temperature sho.pdf BS EN 13687-5-2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Resistance to temperature sho.pdf
  • BS EN 13696-2008 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance《木地板 耐磨损和冲击的弹性测定用试验方法》.pdf BS EN 13696-2008 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance《木地板 耐磨损和冲击的弹性测定用试验方法》.pdf
  • BS EN 13697-2015 Chemical disinfectants and antiseptics Quantitative non-porous surface test for the evaluation of bactericidal and or fungicidal activity of chemical disinfectantsn.pdf BS EN 13697-2015 Chemical disinfectants and antiseptics Quantitative non-porous surface test for the evaluation of bactericidal and or fungicidal activity of chemical disinfectantsn.pdf
  • BS EN 13698-1-2003 Pallet production specification - Construction specification for 800 mm x 1200 mm flat wooden pallets《托盘生产规范 800 mm x 1200 mm木制平托盘的制作规范》.pdf BS EN 13698-1-2003 Pallet production specification - Construction specification for 800 mm x 1200 mm flat wooden pallets《托盘生产规范 800 mm x 1200 mm木制平托盘的制作规范》.pdf
  • BS EN 13698-2-2009 Pallet production specification - Part 2 Construction specification for 1000 mm x 1200 mm flat wooden pallets《托盘生产规范 第2部分 1000 mm x 1200 mm木制平托盘的制作规范》.pdf BS EN 13698-2-2009 Pallet production specification - Part 2 Construction specification for 1000 mm x 1200 mm flat wooden pallets《托盘生产规范 第2部分 1000 mm x 1200 mm木制平托盘的制作规范》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1