CAN CSA-C61000-3-7-2009 Electromagnetic compatibility (EMC) – Part 3-7 Limits – Assessment of emission limits for the connection of fluctuating installations to MV HV and EHV powe.pdf

上传人:jobexamine331 文档编号:589674 上传时间:2018-12-15 格式:PDF 页数:80 大小:1.77MB
下载 相关 举报
CAN CSA-C61000-3-7-2009 Electromagnetic compatibility (EMC) – Part 3-7 Limits – Assessment of emission limits for the connection of fluctuating installations to MV HV and EHV powe.pdf_第1页
第1页 / 共80页
CAN CSA-C61000-3-7-2009 Electromagnetic compatibility (EMC) – Part 3-7 Limits – Assessment of emission limits for the connection of fluctuating installations to MV HV and EHV powe.pdf_第2页
第2页 / 共80页
CAN CSA-C61000-3-7-2009 Electromagnetic compatibility (EMC) – Part 3-7 Limits – Assessment of emission limits for the connection of fluctuating installations to MV HV and EHV powe.pdf_第3页
第3页 / 共80页
CAN CSA-C61000-3-7-2009 Electromagnetic compatibility (EMC) – Part 3-7 Limits – Assessment of emission limits for the connection of fluctuating installations to MV HV and EHV powe.pdf_第4页
第4页 / 共80页
CAN CSA-C61000-3-7-2009 Electromagnetic compatibility (EMC) – Part 3-7 Limits – Assessment of emission limits for the connection of fluctuating installations to MV HV and EHV powe.pdf_第5页
第5页 / 共80页
亲,该文档总共80页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、 Electromagnetic compatibility (EMC) Part 3-7: Limits Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems IEC/TR61000-3-7:2008(E) BASIC EMC PUBLICATION National Standard of CanadaCAN/CSA-C61000-3-7:09(IEC/TR 61000-3-7:2008)Technical Report IE

2、C/TR 61000-3-7:2008 (second edition, 2008-02) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-C61000-3-7:09, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 978-1-55491-037-3 February 2009 International Electrotechnical Commission (I

3、EC), 2008. All rights reserved. NOT FOR RESALE. THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including

4、photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or you

5、r local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les mic

6、rofilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre

7、 pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electr

8、onic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The

9、 IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Publi

10、shed details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in

11、additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csci

12、ec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos de

13、s publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de l

14、a CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publicatio

15、ns de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en ang

16、lais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous av

17、ez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by the Standards Counc

18、il of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify t

19、he content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or

20、 use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA makes no representations or warranties regarding this documents compliance with

21、any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT

22、 NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR

23、 USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty o

24、wed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the infor

25、mation contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and own

26、ershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade se

27、crets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSAs and/or others intel

28、lectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility

29、 that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibi

30、lity.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.

31、search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not

32、 and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice,

33、 you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian Standards Association (CSA),u

34、nder whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited by the Standards Council of Canadato the National Standards system in 1973. It is anot-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activiti

35、es.CSA standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, unions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal governments i

36、n their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations acrossCanada indicate their support for CSAs standardsdevelopment by volunteering their time and skillsto CSA Committee work and supporting theAsso

37、ciations objectives through sustainingmemberships. The more than 7000 committeevolunteers and the 2000 sustaining membershipstogether form CSAs total membership from whichits Directors are chosen. Sustaining membershipsrepresent a major source of income for CSAsstandards development activities.The A

38、ssociation offers certification and testingservices in support of and as an extension to itsstandards development activities. To ensure theintegrity of its certification process, the Associationregularly and continually audits and inspects productsthat bear the CSA Mark.In addition to its head offic

39、e and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canada and inspection andtesting agencies in eight countries. Since 1919, theAssociation has developed the necessary expertise tomeet its corporate mission: CSA is an independentservice organization whose miss

40、ion is to provide anopen and effective forum for activities facilitating theexchange of goods and services through the use ofstandards, certification and related services to meetnational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spect

41、rum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national i

42、nterest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering interna

43、tionalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by an accredited StandardsDevelopment Organization (SDO) and approvedby the SCC according to the requirements of CAN-P-2.Approval does not refer to the technical content of thestandard;

44、this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number ofcapable individuals whose collective interests provide,to the greatest practicable extent, a balance ofrepresentation of general interests, producers,regulators, users (including consumers), and otherswit

45、h relevant interests, as may be appropriate to thesubject in hand. It normally is a standard which iscapable of making a significant and timely contributionto the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. User

46、s of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The responsibility for approving standards asNational Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaAlthough the intended primary appl

47、ication of this Standard is stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationCette norme est offerte en anglais seulement pour le moment. La CSA pub

48、liera la version enfranais ds quelle sera produite par lorganisme rdacteur.Reviewed byNational Standard of CanadaPublished in February 2009 by Canadian Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 41

49、6-747-4044Visit our Online Store at www.ShopCSA.caPrepared byInternational Electrotechnical CommissionApproved byStandards Council of CanadaCAN/CSA-C61000-3-7:09Electromagnetic compatibility (EMC) Part 3-7: Limits Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systemsCAN/CSA-C61000-3-7:09Electromagnetic compatibility (EMC) Part 3-7: Limits Assessment of emission

展开阅读全文
相关资源
猜你喜欢
  • ASTM A278 A278M-2001(2015) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650° F (350° C)《温度高达650 ℉ (350 ℃) 的承压件灰铁铸件的标准规格》.pdf ASTM A278 A278M-2001(2015) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650° F (350° C)《温度高达650 ℉ (350 ℃) 的承压件灰铁铸件的标准规格》.pdf
  • ASTM A283 A283M-2003(2007) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低和中等抗拉强度碳素钢板标准规范》.pdf ASTM A283 A283M-2003(2007) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低和中等抗拉强度碳素钢板标准规范》.pdf
  • ASTM A283 A283M-2012 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板标准规格》.pdf ASTM A283 A283M-2012 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板标准规格》.pdf
  • ASTM A283 A283M-2012a Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板的标准规格》.pdf ASTM A283 A283M-2012a Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板的标准规格》.pdf
  • ASTM A283 A283M-2013 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板的标准规格》.pdf ASTM A283 A283M-2013 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板的标准规格》.pdf
  • ASTM A283 A283M-2018 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板的标准规格》.pdf ASTM A283 A283M-2018 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates《低等和中等抗拉强度碳素钢板的标准规格》.pdf
  • ASTM A285 A285M-2003 Standard Specification for Pressure Vessel Plates Carbon Steel Low- and Intermediate-Tensile Strength《压力容器用低、中抗拉强度碳钢板的标准规范》.pdf ASTM A285 A285M-2003 Standard Specification for Pressure Vessel Plates Carbon Steel Low- and Intermediate-Tensile Strength《压力容器用低、中抗拉强度碳钢板的标准规范》.pdf
  • ASTM A285 A285M-2003(2007) Standard Specification for Pressure Vessel Plates Carbon Steel Low- and Intermediate-Tensile Strength《压力容器用低和中等抗拉强度的碳素钢板的标准规范》.pdf ASTM A285 A285M-2003(2007) Standard Specification for Pressure Vessel Plates Carbon Steel Low- and Intermediate-Tensile Strength《压力容器用低和中等抗拉强度的碳素钢板的标准规范》.pdf
  • ASTM A285 A285M-2012 Standard Specification for Pressure Vessel Plates Carbon Steel Low- and Intermediate-Tensile Strength 《压力容器用低和中等抗拉强度的碳素钢板的标准规格》.pdf ASTM A285 A285M-2012 Standard Specification for Pressure Vessel Plates Carbon Steel Low- and Intermediate-Tensile Strength 《压力容器用低和中等抗拉强度的碳素钢板的标准规格》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1