1、I N T E R N AT IO N A L S TA N D A R D ISO/IEC 861 3-4 Second edition 1994-1 2-1 5 Information technology - Open Document Architecture (ODA) and Interchange Format: Document profile Technologies de /information - Architecture des documents ouverts (ODA) et format dechange: Profil de documents Nation
2、al Standard of Canada CA N/CSA-ISO/E C-8613-4-95 International Standard ISO/IEC 8613-4: 1994 has been adopted, without modification, as CAN/CSA-ISO/IEC-8613-4-95, which has been approved as a National Standard of Canada by the Standards Council of Canada. December 1995 Reference number ISO/lEC 861 3
3、-41 994E) Information technology Open Do cument Architecture (ODA) and Interchange Format: Document profileTechnical Corrigendum 2:2013 (IDT) toNational Standard of CanadaCAN/CSA-ISO/IEC 8613-4-95(ISO/IEC 8613-4:1994, IDT)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standards Update ServiceT
4、echnical Corrigendum 2:2013 toCAN/CSA-ISO/IEC 8613-4-95January 2013Title:Information technology Open Documen t Architecture (ODA) and Interchange Format: Document profilePagination:2 pagesTo register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update Se
5、rviceThe List ID that you will need to register for updates to this publication is 2411453.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.ICS 35.240.20
6、 Ref. No. ISO/IEC 8613-4:1994/Cor.2:1998(E) ISO/IEC 1998bcINTERNATIONAL STANDARD ISO/IEC 8613-4:1994TECHNICAL CORRIGENDUM 2Published 1998-12-15INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQ
7、UE INTERNATIONALEInformation technology Open Document Architecture(ODA) and Interchange Format: Document profileTECHNICAL CORRIGENDUM 2Technologies de linformation Architecture de document ouverte (ODA) et format de transfert: Profil dedocumentsRECTIFICATIF TECHNIQUE 2Technical Corrigendum 2 to Inte
8、rnational Standard ISO/IEC 8613-4:1994 was prepared by Joint TechnicalCommittee ISO/IEC JTC 1, Information technology.Technical Corrigendum 2:2013 to CAN/CSA-ISO/IEC 8613-4-95)3/ )%#G0 G13 G0 G0 #OR G0 G0 G0 %G9)45G134G02EC G04 G0 G9 #OR G0 G0%G9 1).4%2.!4)/.!,G0G034!.$!2$ISO/IEC 8613-4 : 1994/Cor.2
9、 : 1998 (E)ITU-T Rec. T.414 (1993)/Cor.2 (1997 E)45G134G0G02%#/-%.$!4)/.). “external content architecture coding attributes”.G9 3UBCLAUSEG0 )NG0THEG0BULLETG0LISTG0ING0THEG0THIRDG0PARAGRAPH G0REPLACE “geometric graphics presentation features”.BY “geometric graphics presentation features”; “external c
10、ontent architecture presentation features”.Technical Corrigendum 2:2013 to CAN/CSA-ISO/IEC 8613-4-95Copyright NoticeThis Amendment to the International Standard contains information copyright protected by t he International Organization for Standardization (ISO) and the International Electrotechnica
11、l Commission (IEC). Except as permitted under the laws of Canada, no extract of this Amendment to the International Standard may be reproduced, stored in any retrieval system, or transmitted in any form or by any means, electronic, photocopying, recording, or otherwise, without prior permission from
12、 the Standards Council of Canada (SCC). Requests for permission to reproduce this Amendment to the International Standard or parts thereof should be addressed to Manager, Technical Document Centre Standards Council of Canada 270 Albert Street, Suite 200 Ottawa, Ontario K1P 6N7 The Canadian adoption
13、of this Amendment to the International Standard contains information copyright protected by CSA Group. All rights reserved. No part of this adopted Amendment may be reproduced in any form whatsoever without the prior permission of the publisher. ISO/IEC material is reprinted with permission. Request
14、s for permission to reproduce this adopted Amendment or parts thereof should be addressed to Manager, Sales CSA Group 5060 Spectrum Way, Suite 100 Mississauga, Ontario L4W 5N6Copyright violators will be prosecuted to the full extent of the law.PRINTED IN CANADAIMPRIMEAU CANADA100%CSA Group prints it
15、s publications on Rolland Enviro100, which contains 100%recycled post-consumer fibre, is EcoLogo and Processed Chlorine Free certified, and was manufactured using biogas energy.Information technology Open Do cument Architecture (ODA) and Interchange Format: Document profileTechnical Corrigendum 1:20
16、13 (IDT) toNational Standard of CanadaCAN/CSA-ISO/IEC 8613-4-95(ISO/IEC 8613-4:1994, IDT)NOT FOR RESALE. / PUBLICATION NON DESTINE LA REVENTE.Standards Update ServiceTechnical Corrigendum 1:2013 toCAN/CSA-ISO/IEC 8613-4-95January 2013Title:Information technology Open Documen t Architecture (ODA) and
17、 Interchange Format: Document profilePagination:2 pagesTo register for e-mail notification about any updates to this publicationgo to shop.csa.caclick on CSA Update ServiceThe List ID that you will need to register for updates to this publication is 2411453.If you require assistance, please e-mail t
18、echsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at csagroup.org/legal to find out how we protect your personal information.ICS 35.240.20 Ref. No. ISO/IEC 8613-4:1994/Cor.1:1998(E) ISO/IEC 1998bcINTERNATIONAL STANDARD ISO/IEC 8613-4:1994TECHNICAL CORRIGENDUM 1Published
19、1998-12-15INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQUE INTERNATIONALEInformation technology Open Document Architecture(ODA) and Interchange Format: Document profileTECHNICAL CORRIGENDUM
20、 1Technologies de linformation Architecture de document ouverte (ODA) et format de transfert: Profil dedocumentsRECTIFICATIF TECHNIQUE 1Technical Corrigendum 1 to International Standard ISO/IEC 8613-4:1994 was prepared by Joint TechnicalCommittee ISO/IEC JTC 1, Information technology.Technical Corri
21、gendum 1:2013 to CAN/CSA-ISO/IEC 8613-4-95)3/ )%#G0 G13 G0 G0 #OR G0 G0 G0 %G9)45G134G02EC G04 G0 G9 #OR G0 G0%G9 1).4%2.!4)/.!,G0G034!.$!2$ISO/IEC 8613-4 : 1994/Cor.1 : 1998 (E)ITU-T Rec. T.414 (1993)/Cor.1 (1997 E)45G134G0G02%#/-%.$!4)/.). - Document structures; - Document profile; - Open document
22、 interchange formats; - Character content architectures; - Raster graphics content architectures; - Geometric graphics content architectures; - Formal specification of the Open Document Architecture (FODA). (The formal specification is applicable to ISO/IEC 8613 only). Further Recommendations I Inte
23、rnational Standards may be added to this series of ITU-T Recornmendations I International Standard. Development of this series of ITU-T Recommendations I International Standard was originally in paralleI with ECMA-101 standard: Open Document Architecture. This series of ITU-T Recommendations I Inter
24、national Standard is a new edition of the CCITT T.410 - Series Recommendations (1 988) and IS0 86 13 (1 989). Significant technical changes are the inclusion of the following amendments as agreed by ITU-T and ISOAEC: - Alternative represen tatjon. - Annex on use of MHSMOTIS. - Colour. - Conformance
25、Testing annex. - Document Application Profile, Proforma and Notation. - Security. - Streams. - Styles. - Tiled raster graphics. In addition, a number of technical corrigenda have been applied to this series of ITU-T Recommendations I International Standard. This ITU-T Recommendation 1 International
26、Standard contains three annexes: - Annex A (integral) specifies the format of personal names used in various document profile attributes; - Annex B (integral) specifies a minimum set of document profile attributes that is to be supported by document application profiles; - Annex C (non-integral) con
27、tains an example of a document profile. V ISO/IEC 8613-4: 1994(E) vi ISO/IEC 8613-4 : 1994 (E) INTERNATIONAL STANDAFtD ITU-T RECOMMENDATION INFORMATION TECHNOLOGY - OPEN DOCUMENT ARCHITECTURE (ODA) AND INTERCHANGE FORMAT: DOCUMENT PROFILE 1 Scope The purpose of ITU-T Rec. T.410 - Series 1 ISOAEC 861
28、3 is to facilitate the interchange of documents. In the context of this series of Recommendations I International Standard, documents are to be items such as memoranda, letters, invoices, forms and reports, which may include pictures and tabular material. The content elements used within the documen
29、ts may include graphic characters, raster graphics elements and geometric graphics elements, all potentially within one document. NOTE - This series of Recommendations I International Standard is designed to allow for extensions, including hypermedia features, spreadsheets and additional typcs of co
30、ntent such as audio and video. In addition to the content types defined in this series of Recommendations I International Standard, ODA also provides for arbitrary content types to be included in documents. This series of Recommendations I International Standard applies to the interchange of documen
31、ts by means of data communications or the exchange of storage media. This series of Recommendations I International Standard provides for the interchange of documents for either or both of the following purposes: - - to allow presentation as intended by the originator; to allow processing, such as e
32、diting and reformatting. The composition of a document in interchange can take several forms: formatted form, allowing presentation of the document; processable form, allowing processing of the document; formatted processable form, allowing both presentation and processing of the document. - - - Thi
33、s series of Recommendations I International Standard also provides for the interchange of ODA information structures used for the processing of interchanged documents. This ITU-T Recommendation 1 International Standard: - - defines the purpose of the document profile; specifies the attributes which
34、constitute the document profile. 2 Normative references The following Recommendations and International Standards contain provisions which, through reference in this text, constitute provisions of this Recommendation I International Standard. .4t the time of publication, the editions indicated were
35、valid. All Recommendations and International Standards are subject to revision, and parties to agreements based on this Recommendation I International Standard are encouraged to investigate the possibility of applying the most recent editions of the Recommendations and Standards listed below. Member
36、s of IEC and IS0 maintain registers of currently valid International Standards. The ITU-T Secretariat maintains a list of currently valid ITU-T/CCITT Recommendations. ITU-T Rec. T.414 (1993 E) 3 ISO/IEC 8613-4 : 1994 (E) 2.1 2.2 2.3 3 Identical Recommendations I International Standards - ITU-T Recom
37、mendation T.41 I (1993) I ISOAEC 8613-1: 1994, Infornrariorr rechrrolugy - Open Doclitnetit Architecture (ODA) and Interchange Format: Introduction and general principles. ITU-T Recommendation T.412 (1993) I ISOflEC 86 13-2: 1993, Irfurniarion rechnolagy - Opeti Docrmetzr Architecture (ODA) and Inte
38、rchange Format: Document structures. - - ITU-T Recommendation T.415 (1993) I ISOAEC 8613-5: 1994, InJornmtiurz technoiog) - Open Documem Architecture (ODA) and Inferchange Format: Open Document Intercharige Format. - ITU-T Recommendation T.316 (1993) I ISOAEC 8613-6: 1994, Information rechrzology -
39、Upen Docurnem Architecture (ODA) and Interchange Fomt: Character contenr architectures. ITU-T Recommendation T.4 17 (1993) 1 ISOLLEC 86 13-7: 1994, Information rechnolagy - Open Document Architecture (ODA) and Interchange Format: Raster graphics content architectures. ITU-T Recommendation T.418 (1 9
40、93) I ISOLEC 861 3-8: 1994, Information rechnology - Open Document Architecture (ODA) and Interchange Format: Geometric graphics content architectures. - Paired Recommendations I International Standards equivalent in technical content CCITT X.400 - Series Recommendations (1988), Message Handling Sys
41、tem. ISO/IEC 10021 : 1989, Information technology - Text Communication - Message - Oriented Text Interchange Sysrerns (MOTIS). Additional references ISOAEC 646: 1991, Infomation technology - IS0 7-bit coded character set for infomation interchange. IS0 2022:1986, Information processing - IS0 7-bit a
42、nd “dimensions”, only in the case that this attribute applies to a component of object type page; “transparency”; “colour”; “colour of layout object”; “object colour table”; “content background colour”; “content foreground colour”; “content colour table”; “border”; “layout path”; - “page position”;
43、- “medium type”; - “block alignment”; - “type of coding”. Specifications of the presentation attributes and coding attributes for which a document application profile may define non-standard default values are given in other specifications of the ITU-T Rec. T.410 - Series I ISO/IEC 8613. These inclu
44、de ITU-T Rec. T.416, T.417, T.418 I ISOAEC 8613-6, 8613-7, 8613-8. The value of this attribute is a list of default values for any of the defaultable attributes (document architecture attributes as well as content architecture attributes) for which the document application profile defines a default
45、value different from the default value defined in ITU-T Rec. T.410 - Series I ISO/IEC 8613. If the value of the document profile attribute “document application profile” is an integer and no value is specified for the document application profile default attribute “content architecture class”, the l
46、atter is assumed to have the value formatted raster content architecture class as defined in ITU-T Rec. T.417 I ISO/IEC 8613-7. NOTE - This special default value is provided for compatibility with ITU-T Recommendations. A document appIication profile may define more than one default value for a defa
47、ultable attribute. In this case, and when the default value is to differ from the default value defined in ITU-T Rec. T.410 - Series I ISOAEC 8613, then the value of this attribute shall specify the default value which applies to the particular document. 7.3.3 Document architecture class This attrib
48、ute specifies the document architecture class used in the document. This attribute shall always be specified. The value of this attribute is formatted, processable or formatted processable, representing one of the document architecture classes defined in ITU-T Rec. T.412 I ISOAEC 8613-2. 7.3.4 Conte
49、nt architecture classes This attribute specifies the content architecture classes used in the document. This attribute shall always be specified. The value of this attribute consists of zero or more ASN.1 object identifiers referring to content architecture classes defined in ITU-T Rec. T.410 - Series I ISOAEC 8613 or in other standards. ITU-T Rec.
