1、 Reference numberISO/TS 22559-1:2004(E)ISO 2004Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) Exigences de scurit des ascenseurs Partie 1: Exigences essentielles de scurit globale des ascenseurs National Standard of CanadaCAN/CSA-ISO/TS 22559-1:07(ISO/
2、TS 22559-1:2004)Technical Specification ISO/TS 22559-1:2004 (first edition, 2004-02-01) has been adopted withoutmodification (IDT) as CSA Standard CAN/CSA-ISO/TS 22559-1:07, which has been approved as a NationalStandard of Canada by the Standards Council of Canada.ISBN 1-55436-457-4 March 2007 Inter
3、national Organization for Standardization (ISO), 2004. All rights reserved. NOT FOR RESALE. Legal Notice for StandardsCanadian Standards Association (CSA) standards are developed through a consensus standards development process approved by theStandards Council of Canada. This process brings togethe
4、r volunteers representing varied viewpoints and interests to achieve consensusand develop a standard. Although CSA administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and excl
5、usion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, withoutlimitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or itsnon-infring
6、ement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of anyof the information published in this document. CSA makes no representations or warranties regarding this documents compliance withany applicable statute, rule, or regulation.IN
7、NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES,DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES,HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES,
8、LOST REVENUE, BUSINESSINTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO ORPOSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED O
9、F THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS,COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity
10、. The information in this document isdirected to those who have the appropriate degree of experience to use and apply its contents, and CSA accepts no responsibilitywhatsoever arising in any way from any and all use of or reliance on the information contained in this document.CSA is a private not-fo
11、r-profit company that publishes voluntary standards and related documents. CSA has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA and the users of this document (whether
12、 it be in printed or electronic form), CSA is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), andall inventions and trade secrets that may be contained in this document, whether or not s
13、uch inventions and trade secrets are protectedby patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this documentmay violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or othe
14、rs to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of
15、patent rights. CSA shall not be heldresponsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided
16、by CSA for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document.Limited copi
17、es of this document in print or paper form may be distributed only to persons who are authorized by CSA to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from
18、the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document ormake any copies of the contents hereof, and if you do
19、 make such copies, you are required to destroy them immediately. Use of thisdocument constitutes your acceptance of the terms and conditions of this Legal Notice.The Canadian Standards Association (CSA),under whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited
20、 by the Standards Council of Canadato the National Standards system in 1973. It is anot-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activities.CSA standards reflect a national consensus ofproducers and users including manufacturers,cons
21、umers, retailers, unions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andconstruction, and
22、the environment.Individuals, companies, and associations acrossCanada indicate their support for CSAs standardsdevelopment by volunteering their time and skillsto CSA Committee work and supporting theAssociations objectives through sustainingmemberships. The more than 7000 committeevolunteers and th
23、e 2000 sustaining membershipstogether form CSAs total membership from whichits Directors are chosen. Sustaining membershipsrepresent a major source of income for CSAsstandards development activities.The Association offers certification and testingservices in support of and as an extension to itsstan
24、dards development activities. To ensure theintegrity of its certification process, the Associationregularly and continually audits and inspects productsthat bear the CSA Mark.In addition to its head office and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canad
25、a and inspection andtesting agencies in eight countries. Since 1919, theAssociation has developed the necessary expertise tomeet its corporate mission: CSA is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods an
26、d services through the use ofstandards, certification and related services to meetnational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is th
27、ecoordinating body of the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a
28、 meansof advancing the national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardpre
29、pared or reviewed by an accredited StandardsDevelopment Organization (SDO) and approvedby the SCC according to the requirements of CAN-P-2.Approval does not refer to the technical content of thestandard; this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number of
30、capable individuals whose collective interests provide,to the greatest practicable extent, a balance ofrepresentation of general interests, producers,regulators, users (including consumers), and otherswith relevant interests, as may be appropriate to thesubject in hand. It normally is a standard whi
31、ch iscapable of making a significant and timely contributionto the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The
32、 responsibility for approving standards asNational Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is
33、 stated in its Scope, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationApproved byStandards Council of CanadaNational Standard of CanadaPublished in March 2007 by Canadi
34、an Standards AssociationA not-for-profit private sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caCAN/CSA-ISO/TS 22559-1:07Safety requirements for lifts (elevators) Part 1: Global essential safetyr
35、equirements (GESRs)Registered trade-mark of Canadian Standards AssociationReviewed byPrepared byInternational Organization for StandardizationCAN/CSA-ISO/TS 22559-1:07Safety requirements for lifts (elevators) Part 1:Global essential safety requirements (GESRs)March 2007 Canadian Standards Associatio
36、n CSA/3CAN/CSA-ISO/TS 22559-1:07Safety requirements forlifts (elevators) Part 1:Global essential safetyrequirements (GESRs)CSA PrefaceThis is the first edition of CAN/CSA-ISO/TS 22559-1, Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs), which is an adopt
37、ion without modification of the identically titled ISO (International Organization for Standardization) Technical Specification 22559-1 (first edition, 2004-02-01).This Technical Specification was reviewed for Canadian adoption by the CSA Technical Committee on the Elevator Safety Code, under the ju
38、risdiction of the Strategic Steering Committee on Mechanical Industrial Equipment Safety, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada.March 2007 Canadian Standards Association 2007All r
39、ights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. ISO material is reprinted with permission. Where the words “this Technical Specification” appear in the text, they should be interpreted as “this National Standard of C
40、anada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs Online Store at www.Sh
41、opCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.Reference numberISO/TS 22559-1:2004(E)ISO 2004TECHNICAL SPECIFICATION ISO/TS22559-1First edition2004-02-01Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) Exigences de scurit des ascenseurs Partie
42、 1: Exigences essentielles de scurit globale des ascenseurs ISO/TS 22559-1:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed
43、to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the so
44、ftware products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it
45、 is found, please inform the Central Secretariat at the address given below. ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permis
46、sion in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org ii ISO 2004 All rights reservedCAN/CSA-ISO/TS 22559-1:
47、07ISO/TS 22559-1:2004(E) ISO 2004 All rights reserved iiiContents Page Foreword iv 0 Introduction . v 1 Scope 1 2 Normative references . 2 3 Terms, definitions and abbreviations . 2 4 Approach and methodology 6 4.1 Background . 6 4.2 Approach 6 4.3 Methodology 7 5 Understanding and implementing GESR
48、s 7 5.1 Overall objective . 7 5.2 Use of GESRs 9 5.3 Use of this part of ISO/TS 22559 11 6 Global essential safety requirements (GESRs) 13 6.1 Common GESRs related to persons at different locations 13 6.2 GESRs related to persons adjacent to the lift 15 6.3 GESRs related to persons at the entrances.
49、 15 6.4 GESRs related to persons in the LCU. 16 6.5 GESRs related to persons in working areas 19 Annex A (informative) Overview of GESRs in relation to lift subsystems 21 Bibliography . 26 CAN/CSA-ISO/TS 22559-1:07ISO/TS 22559-1:2004(E) iv ISO 2004 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally
