1、Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test method and acceptance conditionsCAN/CSA-M3463-09(ISO 3463:2006, IDT)National Standard of CanadaNOT FOR RESALE.PUBLICATION NON DESTINE LA REVENTE.Legal Notice for StandardsCanadian Standards Association (CSA) st
2、andards are developed through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA administers the process and establishes
3、rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without lim
4、itation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. CSA does not warrant the accuracy, completeness, or currency of any of the information published
5、 in this document. CSA makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation. IN NO EVENT SHALL CSA, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIR
6、ECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEG
7、LIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA is not undertaking to
8、render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA a
9、ccepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. CSA is a private not-for-profit company that publishes voluntary standards and related documents. CSA has no power, nor does it undertake, to enforce compliance w
10、ith the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs between CSA and the users of this document (whether it be in printed or electronic form), CSA is the owner, or the authorized licensee, of all works contained herein that are protected by
11、copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modif
12、ication, copying, or disclosure of this document may violate laws that protect CSAs and/or others intellectual property and may give rise to a right in CSA and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA reserv
13、es all intellectual property rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressl
14、y advised that determination of the validity of any such patent rights is entirely their own responsibility.Authorized use of this documentThis document is being provided by CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this do
15、cument is in electronic form:.load this document onto a computer for the sole purpose of reviewing it;.search and browse this document; and.print this document if it is in PDF format. Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA
16、to have such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to.alter this document in any way or remove this Legal Notice from the attached standard;.sell this document without authorization from CSA; or.make an electronic copy of
17、 this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitutes your
18、 acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceCAN/CSA-M3463-09November 2009Title: Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test method and acceptance conditionsPagination: 40 pages (CSA/1CSA/5, iv, and 30 text)To
19、register for e-mail notification about any updates to this publicationgo to www.ShopCSA.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2419759.If you require assistance, please e-mail techs
20、upportcsa.ca or call 416-747-2233.Visit CSAs policy on privacy at www.csagroup.org/legal to find out how we protect your personal information.The Canadian Standards Association (CSA),under whose auspices this National Standard hasbeen produced, was chartered in 1919 andaccredited by the Standards Co
21、uncil of Canadato the National Standards system in 1973. It is anot-for-profit, nonstatutory, voluntary membershipassociation engaged in standards development andcertification activities.CSA standards reflect a national consensus ofproducers and users including manufacturers,consumers, retailers, un
22、ions and professionalorganizations, and governmental agencies. Thestandards are used widely by industry and commerceand often adopted by municipal, provincial, andfederal governments in their regulations, particularlyin the fields of health, safety, building andconstruction, and the environment.Indi
23、viduals, companies, and associations acrossCanada indicate their support for CSAs standardsdevelopment by volunteering their time and skillsto CSA Committee work and supporting theAssociations objectives through sustainingmemberships. The more than 7000 committeevolunteers and the 2000 sustaining me
24、mbershipstogether form CSAs total membership from whichits Directors are chosen. Sustaining membershipsrepresent a major source of income for CSAsstandards development activities.The Association offers certification and testingservices in support of and as an extension to itsstandards development ac
25、tivities. To ensure theintegrity of its certification process, the Associationregularly and continually audits and inspects productsthat bear the CSA Mark.In addition to its head office and laboratorycomplex in Toronto, CSA has regional branch officesin major centres across Canada and inspection and
26、testing agencies in eight countries. Since 1919, theAssociation has developed the necessary expertise tomeet its corporate mission: CSA is an independentservice organization whose mission is to provide anopen and effective forum for activities facilitating theexchange of goods and services through t
27、he use ofstandards, certification and related services to meetnational and international needs.For further information on CSA services, write toCanadian Standards Association5060 Spectrum Way, Suite 100Mississauga, Ontario, L4W 5N6CanadaThe Standards Council of Canada (SCC) is thecoordinating body o
28、f the National StandardsSystem, a coalition of independent, autonomousorganizations working towards the furtherdevelopment and improvement of voluntarystandardization in the national interest.The principal objects of the SCC are to fosterand promote voluntary standardization as a meansof advancing t
29、he national economy, benefiting thehealth, safety, and welfare of the public, assistingand protecting the consumer, facilitating domesticand international trade, and furthering internationalcooperation in the field of standards.A National Standard of Canada (NSC) is a standardprepared or reviewed by
30、 an accredited StandardsDevelopment Organization (SDO) and approvedby the SCC according to the requirements of CAN-P-2.Approval does not refer to the technical content of thestandard; this remains the continuing responsibility ofthe SDO. An NSC reflects a consensus of a number ofcapable individuals
31、whose collective interests provide,to the greatest practicable extent, a balance ofrepresentation of general interests, producers,regulators, users (including consumers), and otherswith relevant interests, as may be appropriate to thesubject in hand. It normally is a standard which iscapable of maki
32、ng a significant and timely contributionto the national interest.Those who have a need to apply standards areencouraged to use NSCs. These standards are subjectto periodic review. Users of NSCs are cautionedto obtain the latest edition from the SDO whichpublishes the standard.The responsibility for
33、approving standards asNational Standards of Canada rests with theStandards Council of Canada270 Albert Street, Suite 200Ottawa, Ontario, K1P 6N7CanadaCette Norme nationale du Canada est offerte en anglais et en franais.Although the intended primary application of this Standard is stated in its Scope
34、, it is importantto note that it remains the responsibility of the users to judge its suitability for their particular purpose.Registered trade-mark of Canadian Standards AssociationReviewed byNational Standard of CanadaPublished in November 2009 by Canadian Standards AssociationA not-for-profit pri
35、vate sector organization5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N61-800-463-6727 416-747-4044Visit our Online Store at www.ShopCSA.caApproved byStandards Council of CanadaCAN/CSA-M3463-09Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test
36、 method and acceptance conditionsPrepared byInternational Organization for StandardizationCAN/CSA-M3463-09Tractors for agriculture and forestry Roll-overprotective structures (ROPS) Dynamic testmethod and acceptance conditionsCSA/4 Canadian Standards Association November 2009CAN/CSA-M3463-09Tractors
37、 for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test method and acceptance conditionsCSA PrefaceThis is the first edition of CAN/CSA-M3463, Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test method and acceptance conditions, which i
38、s an adoption without modification of the identically titled ISO (International Organization for Standardization) Standard 3463 (fourth edition, 2006-11-15).This Standard is intended to be used in conjunction with CSA B352.0.This Standard is one in a series of CSA Standards on roll-over and tip-over
39、 protection for mobile construction, industrial, mining, forestry, and agricultural machinery. This series consists of the following Standards: (a) M3463, Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test method and acceptance conditions; (b) M3471, Earth-movi
40、ng machinery Roll-over protective structures Laboratory tests and performance requirements;(c) M5700, Tractors for agriculture and forestry Roll-over protective structures (ROPS) Static test method and acceptance conditions;(d) M8082, Self-propelled machinery for forestry Roll-over protective struct
41、ures Laboratory tests and performance requirements;(e) M12003-1, Agricultural and forestry tractors Roll-over protective structures on narrow-track wheeled tractors Part 1: Front-mounted ROPS;(f) M12003-2, Agricultural and forestry tractors Roll-over protective structures on narrow-track wheeled tra
42、ctors Part 2: Rear-mounted ROPS; and(g) M12117, Earth-moving machinery Tip-over protection structure (TOPS) for compact excavators Laboratory tests and performance requirements.This series of Standards supersedes CSA B352.1 and CSA B352.2, Rollover Protective Structures (ROPS) for Agricultural, Cons
43、truction, Earthmoving, Forestry, Industrial, and Mining Machines, Parts 2 and 3, published in 1995.Additional Standards will be added to the series as they are developed.Adoption of these ISO Standards on ROPS and TOPS, along with Standards such as ISO 3776 on operator restraint systems, will aid in
44、 the safe design of mobile construction, industrial, mining, forestry, and agricultural machinery across North America. This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Roll-over Protective Structures, under the jurisdiction of the Strategic Steering Committee on Oc
45、cupational Health and Safety, and has been formally approved by the Technical Committee. This Standard has been approved as a National Standard of Canada by the Standards Council of Canada. November 2009CAN/CSA-M3463-09Tractors for agriculture and forestry Roll-overprotective structures (ROPS) Dynam
46、ic testmethod and acceptance conditionsNovember 2009 Canadian Standards Association CSA/5 Canadian Standards Association 2009All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. ISO material is reprinted with permiss
47、ion. Where the words “this International Standard” appear in the text, they should be interpreted as “this National Standard of Canada”.Inquiries regarding this National Standard of Canada should be addressed toCanadian Standards Association5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada
48、L4W 5N61-800-463-6727 416-747-4000www.csa.caTo purchase CSA Standards and related publications, visit CSAs Online Store at www.ShopCSA.ca or call toll-free 1-800-463-6727 or 416-747-4044.CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appro
49、priate committee. To submit a proposal for change to CSA Standards, please send the following information to inquiriescsa.ca and include “Proposal for change” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change.Reference numberISO 3463:2006(E)ISO 2006INTERNATIONAL STANDARD ISO3463Fourth edition2006-11-15Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic
