1、PUBLISHED DOCUMENTPD CEN/TR 15226:2006Building products Treatment of acoustics in product technical specificationsICS 03.120.10; 11.020g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38
2、g50g51g60g53g44g42g43g55g3g47g36g58PD CEN/TR 15226:2006This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007ISBN 978 0 580 50505 8National forewordThis Published Document was published by BSI. It is the UK implementation of
3、 CEN/TR 15226:2006.The UK participation in its preparation was entrusted by Technical Committee EH/1, Acoustics, to Subcommittee EH/1/6, Building acoustics.A list of organizations represented on EH/1/6 can be obtained on request to its secretary.This publication does not purport to include all the n
4、ecessary provisions of a contract. Users are responsible for its correct application.Amendments issued since publicationAmd. No. Date CommentsTECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BERICHTCEN/TR 15226March 2006ICS 03.120.10; 11.020English VersionBuilding products - Treatment of acoustics in pr
5、oduct technicalspecificationsBauprodukte - Behandlung der Akustik in technischenProduktspezifikationenThis Technical Report was approved by CEN on 22 October 2005. It has been drawn up by the Technical Committee CEN/TC 126.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Cz
6、ech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPE
7、N DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. CEN/TR 15226:2006: E2 Contents Page Foreword3 1 Scope 4 2 Normative references 4
8、 3 Terms and definitions .5 4 Requirements for the contents of a product standard 14 5 Extension rules for the declaration of acoustic properties.20 Annex A (informative) Items to be covered in a product standard 24 Annex B (informative) Choosing appropriate properties 25 Annex C (normative) Relevan
9、t measured acoustic properties for some common products 27 Annex D (informative) Examples of rules for direct and extended application of test results33 Bibliography 34 CEN/TR 15226:20063 Foreword This Technical Report (CEN/TR 15226:2006) has been prepared by Technical Committee CEN/TC 126 “Acoustic
10、 properties of building products and of buildings”, the secretariat of which is held by AFNOR. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent
11、 rights. In addition to using this document, it is recommended that product Technical Committees contact CEN/TC 126 for advice on acoustic issues relating to the treatment of acoustics in technical specifications. CEN/TR 15226:20064 1 Scope This document specifies the technical requirements relating
12、 to acoustics for a product standard, European Technical Approval Guidelines (ETAG) or European Technical Approval (ETA) for a specific building product or equipment, or a family of building products or equipment. In particular, it gives advice on how to write requirements in response to the mandate
13、d characteristics on acoustics under the Construction Products Directive. NOTE 1 In the remainder of this document, the terms used relate to CEN and product standards. The concepts are, however, equally applicable to the European Organisation for Technical Approvals (EOTA). The purpose of this docum
14、ent is to assist the product Technical Committees in preparing acoustic clauses to ensure that such product standards: are as homogeneous as possible, with each individual product standard having the same basic structure; are in full accordance with the standards for the measurement of acoustic prop
15、erties; reflect the latest technical knowledge of methods of determining the acoustical properties from the specific family of building products or equipment under consideration. NOTE 2 Clause 2 lists the European and International Standards to be used in the drafting of acoustic provisions standard
16、. Annex A contains an outline of a typical acoustic product standard summarizing the information that is required. Annex B contains guidance on choosing appropriate properties. Annex C describes the relevant measured acoustic properties for common products. 2 Normative references The following refer
17、enced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. 2.1 Standards for the measurement of acoustic properties EN 20140-9,
18、 Acoustics Measurement of sound insulation in buildings and of building elements Part 9: Laboratory measurements of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (ISO 140-9:1985) EN 29052-1, Acoustics Determination of dynamic stiffness Part 1: Materials used un
19、der floating floors in dwellings (ISO 9052-1:1989) EN 29053, Acoustics Materials for acoustical applications Determination of airflow resistance (ISO 9053:1991) EN ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne s
20、ound insulation of building elements (ISO 140-3:1995) EN ISO 140-6, Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998) EN ISO 140-8, Acoustics Measurement of sound insulation in buildin
21、gs and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997) CEN/TR 15226:20065 EN ISO 140-12, Acoustics Measurement of sound insulation in buildings and of building elements Part 12: Labo
22、ratory measurements of room-to-room airborne and impact sound insulation of an access floor (ISO 140-12:2000) EN ISO 354, Acoustics Measurement of sound absorption in a reverberation room (ISO 354:2003) EN ISO 717-1, Acoustics Rating the sound insulation in buildings and of building elements Part 1:
23、 Airborne sound insulation (ISO 717-1:1996) EN ISO 717-2, Acoustics Rating the sound insulation in buildings and of building elements Part 2: Impact sound insulation (ISO 717-2:1996) EN ISO 11654, Acoustics Sound absorbers for use in buildings Rating of sound absorption (ISO 11654:1997) EN ISO 15186
24、-1, Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements (ISO 15186-1:2000) ISO 15186-3, Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measureme
25、nts at low frequencies ISO/PAS 16940, Glass in building Glazing and airborne sound insulation Measurement of the mechanical impedance of laminated glass 2.2 Standards for the estimation of acoustic properties EN 12354-1, Building Acoustics Estimation of acoustic performance of buildings from the per
26、formance of elements Part 1: Airborne sound insulation between rooms EN 12354-2:2000, Building Acoustics Estimation of acoustic performance of buildings from the performance of elements Part 2: Impact sound insulation between rooms EN 12354-6:2003, Building acoustics Estimation of acoustic performan
27、ce of buildings from the performance of elements Part 6: Sound absorption in enclosed spaces 3 Terms and definitions For the purposes of this document, the terms and definitions given in the standards listed in Clause 2 and the following apply. 3.1 general 3.1.1 equivalent continuous sound pressure
28、level, Leq,T(dB) value of the sound pressure level in decibels of a continuous, steady sound, that within a specified time interval, T, has the same mean squared sound pressure as the sound under consideration that varies with time 3.1.2 octave band band of frequencies in which the upper limit of th
29、e band is twice the frequency of the lower limit CEN/TR 15226:20066 3.1.3 one third octave band band of frequencies in which the upper limit of the band is 21/3times the frequency of the lower limit 3.2 airborne sound insulation 3.2.1 sound reduction index, R (dB) ten times the common logarithm of t
30、he ratio of the sound power W1which is incident on a partition under test to the sound power W2transmitted through the specimen, in a stated frequency band laboratory measurement 3.2.2 sound reduction improvement index, R (dB) improvement in the sound reduction index due to a lining (e.g. wall linin
31、g, floating floor, ceiling etc) laboratory measurement 3.2.3 apparent sound reduction index, R (dB) ten times the common logarithm of the ratio of the sound power W1which is incident on a partition under test to the total sound power transmitted into the receiving room, if in addition to the sound p
32、ower W2transmitted through the separating element, the sound power W3transmitted through flanking elements or by other components is significant, in a stated frequency band field measurement 3.2.4 intensity sound reduction index, RI(dB) laboratory measurement of the sound reduction index using sound
33、 intensity measurements in a stated frequency band laboratory measurement 3.2.5 level difference, D (dB) difference in the space and time average sound pressure levels produced in two rooms by one or more sound source in one of them in a stated frequency band 3.2.6 normalized level difference, Dn(dB
34、) level difference corresponding to the reference absorption area in the receiving room in a stated frequency band field measurement 3.2.7 element-normalized level difference, Dn,e(dB) level difference corresponding to the reference absorption area in the receiving room in a stated frequency band fo
35、r a small building element laboratory measurement 3.2.8 standardized level difference, DnT(dB) level difference in a stated frequency band, normalized to a reverberation time of 0,5 s field measurement 3.2.9 suspended-ceiling normalized level difference Dn,c(dB) level difference corresponding to the
36、 reference absorption area in the receiving room in a stated frequency band for sound transmission via a suspended ceiling laboratory measurement CEN/TR 15226:20067 3.3 rating of airborne sound insulation 3.3.1 C (dB) spectrum adaptation term to be added to the single-number quantity to take account
37、 of spectrum No.1 as defined in EN ISO 717-1 3.3.2 Ctr(dB) spectrum adaptation term to be added to the single-number quantity to take account of spectrum No.2 as defined in EN ISO 717-1 3.3.3 weighted sound reduction index, Rw(dB) single-number quantity that characterizes the airborne sound insulati
38、on of a product or building element laboratory measurement 3.3.4 weighted sound reduction improvement index, Rw(dB) single-number quantity that characterizes the improvement in the sound reduction index laboratory measurement 3.3.5 weighted intensity sound reduction index, RI,w(dB) single-number qua
39、ntity that characterizes the airborne sound insulation of a product or building element over a range of frequencies using an intensity technique laboratory measurement 3.3.6 weighted apparent sound reduction index, Rw(dB) single-number quantity that characterizes the airborne sound insulation betwee
40、n rooms in a building field measurement 3.3.7 weighted element-normalized level difference, Dn,e,w(dB) single-number quantity that characterizes the airborne sound insulation of a small building element over a range of frequencies laboratory measurement 3.3.8 weighted standardized level difference,
41、DnT,w(dB) single-number quantity that characterizes the airborne sound insulation between rooms in a building field measurement 3.3.9 weighted suspended-ceiling normalized level difference, Dn,c,w(dB) single-number quantity that characterizes the airborne sound insulation for sound transmission via
42、a suspended ceiling over a range of frequencies laboratory measurement 3.4 impact sound insulation 3.4.1 impact sound pressure level, Li(dB) average sound pressure level in a specific frequency band in a room below a floor, when it is excited by a standard tapping machine in a stated frequency band
43、CEN/TR 15226:20068 3.4.2 normalized impact sound pressure level Ln(dB) impact sound pressure level normalized for a standard absorption area in the receiving room in a stated frequency band laboratory measurement 3.4.3 reduction of impact sound pressure level, L (dB) difference between the average s
44、ound pressure levels in the receiving room in a stated frequency band before and after the installation of, for example, a floor covering laboratory measurement 3.4.4 standardized impact sound pressure level, LnT(dB) impact sound pressure level standardized to a reverberation time in the receiving r
45、oom of 0,5 s in a stated frequency band field measurement 3.4.5 normalized flanking impact sound pressure level Ln,f(dB) impact sound pressure level corresponding to the reference absorption area in the receiving room in a stated frequency band for transmission via a specified flanking path laborato
46、ry measurement 3.5 rating of impact sound insulation 3.5.1 CI(dB) spectrum adaptation term to be added to the single-number quantity to take account of the un-weighted impact sound level as defined in EN ISO 717-2 3.5.2 weighted normalized impact sound pressure level, Lnw(dB) single-number quantity
47、used to characterize the impact sound insulation of floors over a range of frequencies laboratory measurement 3.5.3 weighted reduction in impact sound pressure level, Lw(dB) single-number quantity used to characterize the reduction in the impact sound pressure level laboratory measurement 3.5.4 weig
48、hted standardized impact sound pressure level, LnT,w(dB) single-number-quantity used to characterize the impact sound insulation of floors over a range of frequencies in buildings field measurement 3.5.5 weighted normalized flanking impact sound pressure level Ln,f,w(dB) single-number quantity used
49、to characterize the impact sound insulation of floors for transmission via a specified flanking path over a range of frequencies laboratory measurement 3.6 flanking transmission 3.6.1 vibration reduction index, Kij(dB) quantity related to the vibrational power transmission over a junction between structural elements laboratory measurement CEN/TR 15226:20069 3.6.2 normalized flanking level difference Dn,f(dB) level difference corresponding to the reference a
