CEPT T L 03-16 E-1988 Transmission in a 64 kBit s Channel on Audio Signal Other Than Using A-Law and U-Law《不是使用 A-Law和U-Law的音频信号上64千比特 秒信道中的传输》.pdf

上传人:eventdump275 文档编号:593133 上传时间:2018-12-16 格式:PDF 页数:1 大小:53.53KB
下载 相关 举报
CEPT T L 03-16 E-1988 Transmission in a 64 kBit s Channel on Audio Signal Other Than Using A-Law and U-Law《不是使用 A-Law和U-Law的音频信号上64千比特 秒信道中的传输》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、W 2326434 OOObOLB Yi Page 1 TL03-16E Recommendation T/L 03-16 (Edinburgh 1988) TRANSMISSION IN A 64 KBIT/S CHANNEL ON AUDIO SIGNAL OTHER THAN USING A-LAW AND W-LAW Recommendation proposed by Working Group T/WG 12 “Transmission and Multiplexing” (TM) Text of the Recommendation adopted by the “Telecom

2、munications” Commission: “The European Conference of Posts and Telecommunications Administrations, considering - that some applications can require the need of transporting two 32 kbit/s voice channel in a 64 kbit/s channel, - that some applications require the need of transporting medium quality au

3、dio signal (7 kHz) in a 64 kbit/s channel, - that the installation and operation of equipments from different origins require that they should be standardized, recommends that member Administrations adhere to the specications contained in this Recommendation.” Recommendation T/L 03-16 corresponds to

4、 the following CCITT Recommendations: - Recommendation G.721: “32 kbit/s Adaptive Differential Pulse Code Modulation (ADPCM)” with the following modifications: - all references to the p-law will be suppressed, - within the algorithms “EXPAND”, “COMPRESS” and “SYNC”, input parameter called LAW will b

5、e suppressed. The operations corresponding in the CCITT Recommendation to the case LAW = 1 will be executed, the operations corresponding to LAW = O will be suppressed. - Recommendation G.722: “7 kHz audio coding within 64 kbit/s”, - Recommendation G.761: “General characteristics of a 60 channel transcoder equipment”. Edition of January 30, 1989 P

展开阅读全文
相关资源
猜你喜欢
  • ASTM D6023-2007 374 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的密度(单位.pdf ASTM D6023-2007 374 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的密度(单位.pdf
  • ASTM D6023-2015 1764 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料 (CLSM) 的密度.pdf ASTM D6023-2015 1764 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料 (CLSM) 的密度.pdf
  • ASTM D6023-2016 red 5338 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的.pdf ASTM D6023-2016 red 5338 Standard Test Method for Density (Unit Weight) Yield Cement Content and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)《受控低强度材料(CLSM)的.pdf
  • ASTM D6024 D6024M-2015 8935 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《采用球落在可控制的低强度材料 (CLSM) 上的方法测定.pdf ASTM D6024 D6024M-2015 8935 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《采用球落在可控制的低强度材料 (CLSM) 上的方法测定.pdf
  • ASTM D6024 D6024M-2016 red 6109 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性.pdf ASTM D6024 D6024M-2016 red 6109 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性.pdf
  • ASTM D6024-2002 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性的标准试验方法》.pdf ASTM D6024-2002 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《用球落在可控制的低强度材料上的方法测定荷载适用性的标准试验方法》.pdf
  • ASTM D6024-2007 752 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《在受控低强度材料上方进行球落体运动确定道路建筑适宜性的标准试验方法》.pdf ASTM D6024-2007 752 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application《在受控低强度材料上方进行球落体运动确定道路建筑适宜性的标准试验方法》.pdf
  • ASTM D6026-2006 Standard Practice for Using Significant Digits in Geotechnical Data《在土工学数据中使用有效数字的标准实施规程》.pdf ASTM D6026-2006 Standard Practice for Using Significant Digits in Geotechnical Data《在土工学数据中使用有效数字的标准实施规程》.pdf
  • ASTM D6026-2013 red 7302 Standard Practice for Using Significant Digits in Geotechnical Data《在土工学数据中使用有效数字的标准实施规程》.pdf ASTM D6026-2013 red 7302 Standard Practice for Using Significant Digits in Geotechnical Data《在土工学数据中使用有效数字的标准实施规程》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1