CGA P-25-2007 GUIDE FOR FLAT-BOTTOMED LOX LIN LAR STORAGE TANK SYSTEMS nSECOND SYSTEMS《液氧 液氮 液氩用平底储罐系统的指南 第2版》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 60534-2-1-2011 Industrial-process control valves Flow capacity Sizing equations for fluid flow under installed conditions《工业流程控制阀 流通能力 在安装条件下液体流量的定径方程》.pdf

BS EN 60534-2-3-2016 Industrial-process control valves Flow capacity Test procedures《工业过程控制阀 流量 试验程序》.pdf

BS EN 60534-2-4-2009 Industrial-process control valves - Flow capacity - Inherent flow characteristics and rangeability《工业过程控制阀 流量 固有流动特性和变化幅度》.pdf

BS EN 60534-2-5-2003 Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery《工业过程控制阀 流通能力 通过有.pdf

BS EN 60534-3-1-2000 Industrial-process control valves Dimensions Face-to-face dimensions for flanged two-way globe-type straight pattern and centre-to-face dimensions for flanged 工.pdf

BS EN 60534-3-2-2001 Industrial-process control valves Dimensions Face-to-face dimensions for rotary control valves except butterfly valves《工业过程控制阀 尺寸规格 蝶形阀除外的转式控制阀端面距》.pdf

BS EN 60534-3-3-1998 Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld two-way globe-type straight pattern control valves《工业过程控制阀 尺寸 对接焊接 两向 球型 垂直.pdf

BS EN 60534-4-2006 Industrial-process control valves - Inspection and routine testing《工业过程控制阀 检验和常规测试》.pdf

BS EN 60534-5-2004 Industrial-process control valves - Marking《工业过程控制阀 标记》.pdf