1、C22.2 No. 12-1982(reaffirmed 2013)Portable LuminairesLegal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approved by the Standards Council of Canada. This process brings together volunteers represent
2、ing varied viewpoints and interests to achieve consensus and develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it does not independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabi
3、lityThis document is provided without any representations, warranties, or conditions of any kind, express or implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any
4、 third partys intellectual property rights. CSA Group does not warrant the accuracy, completeness, or currency of any of the information published in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.
5、IN NO EVENT SHALL CSA GROUP, ITS VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIA
6、L DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROU
7、P HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity
8、 to another person or entity. The information in this document is directed to those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in t
9、his document. CSA Group is a private not-for-profit company that publishes voluntary standards and related documents. CSA Group has no power, nor does it undertake, to enforce compliance with the contents of the standards or other documents it publishes. Intellectual property rights and ownershipAs
10、between CSA Group and the users of this document (whether it be in printed or electronic form), CSA Group is the owner, or the authorized licensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade
11、 secrets that may be contained in this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document may violate laws that protect CSA Groups and/or oth
12、ers intellectual property and may give rise to a right in CSA Group and/or others to seek legal redress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectual property rights in this document.Patent rightsAttention is dra
13、wn to the possibility that some of the elements of this standard may be the subject of patent rights. CSA Group shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity of any such patent rights is en
14、tirely their own responsibility.Authorized use of this documentThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in electronic form:sLOADTHISDOCUMENTONTOACOMPUTERFORTHESOLEP
15、URPOSEOFREVIEWINGITsSEARCHANDBROWSETHISDOCUMENTANDsPRINTTHISDOCUMENTIFITISIN0$ 7 and 8 dated August 1988; 15, 16, 16A, 35, 36 and 36A dated June 1989; 1114, 1720, 2328, 28A, 28B, 41, 42 and 43 dated July 1991; and 3, 4, 21, 22, 22A and 28C dated December 1996; Update your copy by inserting these rev
16、ised pages. Keep the pages you remove for reference. Portable Luminaires 3 Contents Page 5 Subcommittee on C22.2 No. 12 6 Committee on Canadian Electrical Code, Part II 8 Preface 10 Foreword Standard 11 1. Scope 11 2. Definitions 12 3. General Requirements 12 4. Construction 12 4.1 General 13 4.2 El
17、ectrical Enclosures 13 4.2. 1 General 13 4.2.2 Openings in Degree of Enclosure 14 4.2.3 Enclosure Materials 14 4.3 Mounting Provisions 15 4.4 Corrosion Protection 15 4.5 Stems and Tubes 15 4.6 Mechanicat Joints and Fastenings 16 4.7 Shades, Diffusers, and Lamp Guards 16 4.8 Wiring Joints and Termina
18、l Connections 16 4.9 Wiring Devices 16 4.9.1 General 17 4.9.2 Lampholders 17 4.9.3 Switches 17 4.9.4 Receptacles 17 4.9.5 Ballasts, Transformers, Capacitors, Resistors, and Other Auxiliary-Type Devices 18 4.10 Gaskets 18 4.11 Flexible Supply Cords 18 4.12 Internal Wiring 19 4.13 Bushings 19 4.14 Pol
19、arization and Identification 19 4.15 Strain Relief 20 4.16 Spacings 20 4.17 Electrical Insulating Materials 20 4.18 Replacement of Lamps and Automatic Starters 20 4.19 Incandescent Luminaire Kits 21 4.20 Grounding and Bonding 21 4.21 Blades (Nightlights) 22 4.22 Floor-Type Portable Luminaires 22 5.
20、Marking 22 5.1 General 22 5.2 Lamp Replacement Caution 22 5.3 Additional Cautions or Warnings 23 5.4 Instructions 23 5.5 Date Marking December 1996 (Replaces p. 3, July 1991) 4 CSA Standard C22.2 No. 12-1 982 24 6. Tests 24 6.1 General 24 6.2 Test Conditions 24 6.2. 1 General 24 6.2.2 Voltage and Fr
21、equency 25 6.2.3 Test Lamps 25 6.3 Normal Temperature 26 6.4 Abnormal Conditions 26 6.5 Flame 27 6.6 Alternative Flame Test 27 6.7 Loading 27 6.8 Strain Relief 27 6.9 Endurance (Extension-Lamp Cord Reel) 28 6.10 Swivel Strength, Flexing, and Swivelling 28 6.11 Stability 28 6.12 Humidity 28 6.13 Weat
22、herproofness 28 6.14 Leakage Current 28 6.15 Dielectric Strength 28 6.15.1 General 28 6. 15.2 Fluorescent and Incandescent Types (Without Transformers) 28A 6. 15.3 Luminaires with Class 2 Type Transformers 28A 6.15.4 Luminaires with Xenon Lamps 28A 6.15.5 Luminaires with Capacitors 28A 6.16 Mechanic
23、al Strength 28A 6.17 Accelerated Aging 28A 6.18 Flaming Oil Test for Perforated Panels 28A 6.19 Lampholder Cavity Separation (Nightlights) 28B 6.20 Pull (Nightlights) 28B 6.21 Blades (Nightlights) 28B 6.22 Blanketing (Nightlights) 28B 6.23 Depth of Holder Cavity (Candelabra) 28C 6.24 Overlamping (Re
24、lampable Nightlights) 28C 6.25 Abnormal Operation Test 29 Tables 38 Figures December 1996 (Replaces p. 4, July 1991) Portable Luminaires 21 4.1 7.2 Materials shall be permanently retained in place. 4.18 Replacement of Lamps and Automatic Starters 4.18.1 Bare live parts shall not be exposed during th
25、e replacement operation or during cleaning of the luminaire, accessibility being determined by the probe in Clause 4.2.2.2. If replacement operations expose bare live parts, the device shall be marked in accordance with Clause 5.3.1(k). 4.18.2 Wiring joints or electrical components shall not be acce
26、ssible to accidental handling that would loosen or otherwise damage these parts. Note: At least a separate barrier or a natural barrier provided by the construction of the device (see Clause 4.17) will be required. 4.18.3 Parts that may be removed during normal use, such as for cleaning or relamping
27、, shall be designed or marked to prevent replacement in a position that would affect the safe operation of the luminaire. 4.19 Incandescent Luminaire Kits 4.19.1 When assembled in the intended manner, a kit shall form an incandescent luminaire, with or without shade and with or without support or ba
28、se, complying with all of the applicable requirements of this Standard. 4.19.2 No electrical components other than a lampholder having binding-screw terminals, a power-supply cord, and a cord switch shall be provided. A cord switch, if provided, shall be installed on the cord at the factory. 4.19.3
29、The complete kit shall be packaged in a single carton or container (see also Clause 5.4). 4.20 Grounding and Bonding 4.20.1 The methods and materials used for the grounding and bonding of a luminaire or the parts thereof shall comply with CSA Standard C22.2 No. 0.4, Bonding and Grounding of Electric
30、al Equipment (Protective Grounding). 4.20.2 Residential-type luminaires intended for certain specific uses or damp or wet locations, such as extension hand-lamps, aquarium lamps, and plant-growing lamps, shall be grounded where the construction involves non-current-carrying metal parts that may beco
31、me energized during general use or servicing. 4.20.3 Luminaires intended for commercial and industrial use shall have provision for grounding. This requirement includes the following types of luminaires: (a) Hospital lamps; (b) Photo-engravers arc lamps; (c) Drafting lamps; (d) Machine-shop lamps; (
32、e) Machine-tool lamps; (f) Illuminated shields for use with electric grinders; (g) Lamp testers; (h) Light channels for display of lamp shades; (I) Table illuminators used in science and industry. 4.20.4 Non-current-carrying metal parts that are exposed during general use or servicing (eg, cleaning
33、or relamping) and may become energized shall be bonded for grounding purposes, unless the electrical components within or adjacent to these metal parts are protected with additional insulating material (see Clause 4.17) having a minimum thickness of at least 0.032 inch. Note: The following would be
34、acceptable: (a) 1/32-inch-nominal insulated wire with 1/32-inch-minimum wall sleeving of insulating material within a metal enclosure; (b) 1/32-inch insulated wire within a plastic housing of at least 1/32-inch wall thickness; (c) Bare live parts within a plastic enclosure that complies with Clause
35、4.2; or (d) Bare live parts within a metal enclosure with 2 independent layers of insulation (see Clause 4.17), each not less than 1/32 inch thick. 4.21* Blades (Nightlights) 4.21.1* Blades of a nightlight shall comply with the requirements of Clauses 4.21.1 to 4.21.4, and the Blade Security Test of
36、 Clause 6.21. Nightlights using replaceable lamps shall then be evaluated with the probe of Figure 1, with a lamp installed. 4.21.2* Live parts of a nightlight shall remain inaccessible to the probe of Figure 1. Where necessary, an electrical indicator shall be used to determine whether or not conta
37、ct is made. 4.21.3* Spacings of 1.2 mm shall be maintained between uninsulated live parts of opposite polarity and between uninsulated live parts and exposed non-current-carrying metal parts when the nightlight is installed in the intended manner. 4.21.4* The spacing requirement of Clause 4.21.3 sha
38、ll not apply to the body of a neon lamp if, when the leads are short-circuited at the base of the lamp, the series resistor does not operate in excess of its nominal rating. *Effective Date January 31, 1992 December 1996 (Replaces p. 21, July 1991) 22 CSA Standard C22.2 No. 12-1982 4.22 Floor-Type P
39、ortable Luminaires A luminaire with an open top design facing upward and intended to prevent the lamp from being visible for indirect lighting, such as the torchiere type, and employing a tungsten-halogen lamp with an E26 medium screwbase or a lamp other than the conventional incandescent type with
40、an E26 medium screwbase, shall withstand the Abnormal Operation Test of Clause 6.25 and be marked for keeping away from combustible materials in accordance with Item (I) of Clause 5.3.1. Note: A conventional incandescent lamp is an incandescent lamp that is not of the tungsten-halogen type. 5. Marki
41、ng 5.1 General. Each uminaire shall be plainly and permanently marked with the following information where it will be readily visible: (a) Manufacturers or submittors name, trademark, or other recognized symbol of identification; (b) Catalogue number, model number, or other type designations on lumi
42、naires such as transformer-operated, display, electronic (solid-state), garden, hospital, illuminated-shape, machine-shop and colour-wheel types; (c) Input rating in volts, hertz (or cycles), and total amperes or watts, except on luminaires incorporating only incandescent lamps; and (d) Secondary vo
43、lts and amperes or volt amperes, where applicable. 5.2 Lamp Replacement Caution 5.2.1 Incandescent luminaires, which require a limitation of the lamp wattage, shall be permanently and legibly marked, where readily visible during relamping, with the following caution or equivalent: MAX. WATTS,TYPE No
44、tes: (1) More than one wattage and type of lamp may be included in the caution if sufficient testing is conducted to confirm that the temperature requirements are met. (2) A lamp replacement caution shall not be required for a luminaire if it complies with the normal-temperature test using lamps of
45、the maximum size and type that it will accommodate. 5.2.2 The caution shall be made in a permanent manner, the effects of temperature being considered. Lettering shall be upper case (Univers 65 or equivalent). “MAX“ shall be at least 3/16 inch high (20 point). All other letters shall be at least 3/3
46、2 inch high (10 point). The caution shall be located and executed in such a manner that it is prominent during relamping and there shall be a contrast between the lettering and the background. 5.2.2A* Where size limitations exist (eg, nightlights), the lettering requirements shall be as specified in
47、 Clause 5.2.2 except: (a)* “MAX“ shall be at least 1/16 inch (7 point); (b)* All other letters shall be 3/64 inch (5 point); (c)t Where replacement lamps are limited to candelabra base only, the word “TYPE“ may be omitted. *Effective DateAugust3l, 1988 tEffective Date January 31, 1992 5.2.3 Where sp
48、ecial lamps are intended, the maximum wattage and burning position shall be indicated in an acceptable manner. 5.3 Additional Cautions or Warnings 5.3.1 The following cautions or warnings shall also be permanently marked on each luminaire, as required, in both English and French (equivalent wording
49、will be accepted in all cases): (a) FOR OUTDOOR USE and POUR EMPLOI A LEXTERIEUR. This shall be legible during positioning of the luminaire for use; (b)* Extension hand-lamps shall be marked: FOR HEAVY-DUTY USE IN GARAGES OR SIMILAR LOCATIONS and CONVIENT POUR USAGE INTENSIF DANS LES GARAGES OU AUTRES EMPLACEMENTS or FOR LIGHT-DUTY USE IN NORMALLY DRY LOCATIONS and CONVIENT POUR USAGE ORDINAIRE DAN
