CSN 01 4952-1978 Involute splines with pressure angle 30φ Nominal diameter modules and teeth number《带30压力角的渐开线花键标称直径；模块与齿数》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 01FTM1-2001 Carbide Hobbing Case Study《硬质合金滚刀范例分析》.pdf

AGMA 01FTM10-2001 Design Techologies of High Speed Gear Transmission《高速齿轮传动的设计技术》.pdf

AGMA 01FTM11-2001 Kinematic and Force Analysis of a Spur Gear System with Separation of Sliding and Rolling between Meshing Profiles《带啮合轮廓间滑动和滚动分离的正齿轮系统的运动和应力分析》.pdf

AGMA 01FTM2-2001 The Ultimate Motion Graph for Noiseless Gears《无声齿轮用基本运动图》.pdf

AGMA 01FTM3-2001 Automated Spiral Bevel Gear Pattern Inspection《自动螺旋锥齿轮图形检查》.pdf

AGMA 01FTM4-2001 How to Inspect Large Cylindrical Gears with an Outside Diameter of More Than 40 Inches《如何对带40英寸以上外部直径的大型圆柱齿轮进行检验》.pdf

AGMA 01FTM5-2001 Traceability of Gears - New Ideas Recent Developments《齿轮的可描绘性.近来发展的新观念》.pdf

AGMA 01FTM6-2001 Performance - Based Gear - Error Inspection Specification and Manufacturing - Source Diagnostics《性能.基础齿轮.检验误差和制造规范.来源诊断学》.pdf

AGMA 01FTM7-2001 Chemically Accelerated Vibratory Finishing for the Elimination of Wear and Pitting of Alloy Steel Gears《合金钢齿轮的磨损和点蚀的消除用化学加速振动修整》.pdf