CSN 13 7730-1960 Straight pipe joints《直管连接头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 04FTM3-2004 A Method to Define Profile Modification of Spur Gear and Minimize the Transmission Error《正齿轮的规定外形修正方法和传输误差的最小化》.pdf

AGMA 04FTM4-2004 Influence of Surface Roughness on Gear Pitting Behavior《齿轮表面粗糙度对点蚀性能的影响》.pdf

AGMA 04FTM5-2004 Investigations on the Micropitting Load Capacity of Case Carburized Gears《壳式渗碳齿轮的微小蚀损负载能力的调查》.pdf

AGMA 04FTM6-2004 The Effect of a ZnDTP Anti--wear Additive on Micropitting Resistance of Carburised Steel Rollers《渗碳钢轧辊微小蚀损阻力的ZnDTP抗磨损添加剂的影响》.pdf

AGMA 04FTM7-2004 A Short Procedure to Evaluate Micropitting Using the New AGMA Designed Gears《用新AGMA设计齿轮评估微小蚀损的短期程序》.pdf

AGMA 04FTM8-2004 Generalized Excitation of Traveling Wave Vibration in Gears《齿轮的移动波纹振动的普通激励》.pdf

AGMA 04FTM9-2004 Design of a High Ratio Ultra Safe High Contact Ratio Double Helical Compound Planetary Transmission for Helicopter Applications《直升机设施用双螺旋混合行星齿轮传动高接触传动比率超安全高传动比的设计》.pdf

AGMA 04FTMS1-2004 Stress Analysis of Gear Drives Based on Boundary Element Method《基于边界元素法对齿轮驱动的应力分析》.pdf

AGMA 05FTM01-2005 Fine Pitch Plastic Face Gears Design and Manufacture《塑料面齿轮的精细间距 设计和制造》.pdf