CSN 20 0670-1984 Metal-working machines Numerical control systems for metalworking equipment Data coding in control programs《金属加工设备用数控系统及数据编码控制程序》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB 51032-2014 铁尾矿砂混凝土应用技术规范.pdf

GB 51034-2014 多晶硅工厂设计规范.pdf

GB 51035-2014 电子工业纯水系统安装与验收规范.pdf

GB 51036-2014 有色金属矿山井巷工程质量验收规范.pdf

GB 51037-2014 微组装生产线工艺设备安装工程施工及验收规范.pdf

GB 51039-2014 综合医院建筑设计规范.pdf

GB 51073-2014 医药工业仓储工程设计规范.pdf

GB 5108-1985 等压式焊炬、割炬.pdf

GB 5109-1985 射吸式焊炬.pdf