CSN 22 7523-1975 Sintered carbide drawing dies for dry drawing of steel wires with strength above 1 100 mpa (1100 N mm-2) Dimensions《1100 X mm2以上强度钢丝的干式拉伸用硬金属拉伸模 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2649-2009 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy《气相色谱分析测定在密封绝缘玻璃元件中氩浓度的标准试验方法》.pdf

ASTM E2649-2012 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy《用火花源发射光谱法测定密封绝缘玻璃组件中氩浓度的标准试验方法》.pdf

ASTM E2651-2010 Standard Guide for Powder Particle Size Analysis《粉末粒径分析标准指南》.pdf

ASTM E2651-2013 Standard Guide for Powder Particle Size Analysis《粉末粒度分析的标准指南》.pdf

ASTM E2652-2009 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer at 750&x00B0 C.pdf

ASTM E2652-2009a Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer at 750&x00B0 C《带锥形气流稳定器在750℃管炉中材料性能用标准试验方法》.pdf

ASTM E2652-2009e1 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer at 750&x00B0 C《带锥形气流稳定器在750℃管炉中材料性能用标准试验方法》.pdf

ASTM E2652-2012 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer at 750° C 《带锥形气流稳定器在750℃管炉中材料性能用标准试验方法》.pdf

ASTM E2652-2016 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer at 750&xb0 C《750 ℃下带锥形空气流稳定器的管式炉材料性能的标准试验方法》.pdf