CSN 25 4081-1987 Minimum and maximum check plugs for solid GO screw ring gauge Trapezoidal screw threads《老式螺纹环规用最小化和最大化检查塞 梯形螺纹》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 19816.3-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分 硬度的测定.pdf

GB T 19816.4-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分 表观密度的测定.pdf

GB T 19816.5-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分;缺陷颗粒百分比和微结构的测定.pdf

GB T 19816.6-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分;外来杂质的测定.pdf

GB T 19816.7-2005 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分;含水量的测定.pdf

GB T 19817-2005 纺织品 装饰用织物.pdf

GB T 19818-2005 籽棉清理机.pdf

GB T 19819-2005 锯齿轧花机.pdf

GB T 19820-2005 液压棉花打包机.pdf